Hello! Here is a command line, and n error message for :alsa: mencoder tv:// -tv driver=v4l2:norm=PAL:device=/dev/video0:amode=1:audiorate=32000:forceaudio:volume=100:immediatemode=0:chanlist=europe- west:alsa:channel=E7 -ovc lavc -oac copy tv.avi MEncoder SVN-r29978-4.4.1 (C) 2000-2009 MPlayer Team Option tv: Unknown suboption alsa Exiting... (error parsing command line) ...and when no :alsa: is present, then recording works, but only without sound :S Cs. 2009. december 8. 08.03.33 Horv?th Csaba d?tummal ezt ?rta: > Hello! > > >With Alsa, both the "Line" and "Capture" devices must be marked as > > When i give :alsa: to the command line, mplayer and mencoder both gives an > error message (i'm not at home, but when i get back from work, i will send > the output). In my mixer, i can see the capture input lines, and they > aren't muted or pulled down... (If they were, then will be no sound in > tvtime or with mplayer et al.) > > >And use a real audio codec, like PCM at worst... not "copy". > > I tried to user mp3 codec at past, but i fed up with writing long command > line. For trying to record, copy or pcm is the quickest, if i can record > picture + sound together, i will search for a suitable MP3 codec setting > :) > > (But, i will try an MP3 codec at night, because, as you say, it is possible > that -oac copy doesn't work at my machine? ...everything is possible as an > error ;D ) > > Thanks; > > Csaba Horvath > > <!-- PATH STAT NUMBER ERROR --> > _______________________________________________ > MPlayer-users mailing list > MPlayer-users at mplayerhq.hu > https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users >
