Hi, I'm having some difficulties trimming a FLV file with MEncoder. I've tried two different approaches, with -ss and -endpos: mencoder input.flv -ss 00:10:00 -endpos 00:20:00 -ovc copy -oac copy -o output.flv With this method I get an error message in the output, and MEncoder doesn't seem to recognise the input "nan kbit/s": CPU: Intel(R) Xeon(R) CPU L5420 @ 2.50GHz (Family: 6, Model: 23, Stepping: 8) CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. success: format: 0 data: 0x0 - 0x9fc861 libavformat file format detected. [lavf] Video stream found, -vid 0 [lavf] Audio stream found, -aid 1 VIDEO: [VP6F] 480x208 0bpp 30.000 fps 0.0 kbps ( 0.0 kbyte/s) [V] filefmt:44 fourcc:0x46365056 size:480x208 fps:30.00 ftime:=0.0333 ======================================================================== == Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 44100 Hz, 2 ch, s16le, 96.0 kbit/6.80% (ratio: 12000->176400) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3) ======================================================================== == videocodec: framecopy (480x208 0bpp fourcc=46365056) audiocodec: framecopy (format=55 chans=2 rate=44100 bits=16 B/s=12000 sample-0) Writing index... Writing header... ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Video stream: nan kbit/s (-2147483648 B/s) size: 0 bytes 0.000 secs 0 frames Audio stream: nan kbit/s (-2147483648 B/s) size: 0 bytes 0.000 secs And with -hr-edl-seek: mencoder input.flv -hr-edl-seek -edl a.edl -ovc copy -oac copy -o output.flv With this method it seems to success, though the output is the exact same as the input. No differences, other than a larger output file. Regards, Ronni _______________________________________________ MPlayer-users mailing list MPlayer-users@xxxxxxxxxxxx https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users