Dominik 'Rathann' Mierzejewski schreef: > On Monday, 23 February 2009 at 19:12, Paride Legovini wrote: > >> I have a 24kHz/24bit wave file: >> >> $ file antani.wav >> antani.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 24 >> bit, stereo 48000 Hz >> >> My sound card supports this format, and so I can play it with 'aplay' >> > [...] > >> But I have problems in playing the 24bit/44.1kHz file with mplayer: >> >> $ mplayer -ao alsa:device=hw=1.0 antani.wav >> >> ========================================================================== >> Opening audio decoder: [pcm] Uncompressed PCM audio decoder >> AUDIO: 48000 Hz, 2 ch, s24le, 2304.0 kbit/100.00% (ratio: 288000->288000) >> Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) >> ========================================================================== >> [AO_ALSA] Format s24le is not supported by hardware, trying default. >> [AO_ALSA] Unable to set format: Invalid argument >> Failed to initialize audio driver 'alsa:device=hw=1.0' >> Could not open/initialize audio device -> no sound. >> >> Any clue? >> > > We need full uncut output of mplayer -v -ao alsa:device=hw=1.0 antani.wav > Does it work if you don't specify the audio device manually? > You could also try -format s24le. > > Regards, > R. > > I have the same problem here, and adding -format s24le wont help. I think it's because there's a difference between s24le and s24_3le (?) and I don't know a -format option for s24_3le. Mplayer tries to play s24le, while my /etc/asound.conf says my device uses s24_3le. If I try to set asound.conf to s24le alsa says my device doesn't support it. _______________________________________________ MPlayer-users mailing list MPlayer-users@xxxxxxxxxxxx https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
