Subject: [merged] rapidio-switches-remove-tsi500-driver.patch removed from -mm tree
To: alexandre.bounine@xxxxxxx,galak@xxxxxxxxxxxxxxxxxxx,leoli@xxxxxxxxxxxxx,mporter@xxxxxxxxxxxxxxxxxxx,mm-commits@xxxxxxxxxxxxxxx
From: akpm@xxxxxxxxxxxxxxxxxxxx
Date: Mon, 08 Jul 2013 12:36:31 -0700
The patch titled
Subject: rapidio/switches: remove tsi500 driver
has been removed from the -mm tree. Its filename was
rapidio-switches-remove-tsi500-driver.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Alexandre Bounine <alexandre.bounine@xxxxxxx>
Subject: rapidio/switches: remove tsi500 driver
Remove the driver for Tsi500 Parallel RapidIO switch because this device
has not been available for several years. Since the first introduction of
Tsi500, the parallel RapidIO interface was replaced by the serial RapidIO
(sRIO) and therefore there is no value in keeping this driver.
Signed-off-by: Alexandre Bounine <alexandre.bounine@xxxxxxx>
Cc: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
Cc: Li Yang <leoli@xxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/rapidio/switches/Kconfig | 7 --
drivers/rapidio/switches/Makefile | 1
drivers/rapidio/switches/tsi500.c | 78 ----------------------------
3 files changed, 86 deletions(-)
diff -puN drivers/rapidio/switches/Kconfig~rapidio-switches-remove-tsi500-driver drivers/rapidio/switches/Kconfig
--- a/drivers/rapidio/switches/Kconfig~rapidio-switches-remove-tsi500-driver
+++ a/drivers/rapidio/switches/Kconfig
@@ -26,10 +26,3 @@ config RAPIDIO_CPS_GEN2
default n
---help---
Includes support for ITD CPS Gen.2 serial RapidIO switches.
-
-config RAPIDIO_TSI500
- bool "Tsi500 Parallel RapidIO switch support"
- depends on RAPIDIO
- default n
- ---help---
- Includes support for IDT Tsi500 parallel RapidIO switch.
diff -puN drivers/rapidio/switches/Makefile~rapidio-switches-remove-tsi500-driver drivers/rapidio/switches/Makefile
--- a/drivers/rapidio/switches/Makefile~rapidio-switches-remove-tsi500-driver
+++ a/drivers/rapidio/switches/Makefile
@@ -5,5 +5,4 @@
obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o
obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o
obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o
-obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o
obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o
diff -puN drivers/rapidio/switches/tsi500.c~rapidio-switches-remove-tsi500-driver /dev/null
--- a/drivers/rapidio/switches/tsi500.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * RapidIO Tsi500 switch support
- *
- * Copyright 2009-2010 Integrated Device Technology, Inc.
- * Alexandre Bounine <alexandre.bounine@xxxxxxx>
- * - Modified switch operations initialization.
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
-#include <linux/rio_ids.h>
-#include "../rio.h"
-
-static int
-tsi500_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port)
-{
- int i;
- u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3);
- u32 result;
-
- if (table == 0xff) {
- rio_mport_read_config_32(mport, destid, hopcount, offset, &result);
- result &= ~(0xf << (4*(route_destid & 0x7)));
- for (i=0;i<4;i++)
- rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*i), result | (route_port << (4*(route_destid & 0x7))));
- }
- else {
- rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result);
- result &= ~(0xf << (4*(route_destid & 0x7)));
- rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*table), result | (route_port << (4*(route_destid & 0x7))));
- }
-
- return 0;
-}
-
-static int
-tsi500_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 *route_port)
-{
- int ret = 0;
- u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3);
- u32 result;
-
- if (table == 0xff)
- rio_mport_read_config_32(mport, destid, hopcount, offset, &result);
- else
- rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result);
-
- result &= 0xf << (4*(route_destid & 0x7));
- *route_port = result >> (4*(route_destid & 0x7));
- if (*route_port > 3)
- ret = -1;
-
- return ret;
-}
-
-static int tsi500_switch_init(struct rio_dev *rdev, int do_enum)
-{
- pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
- rdev->rswitch->add_entry = tsi500_route_add_entry;
- rdev->rswitch->get_entry = tsi500_route_get_entry;
- rdev->rswitch->clr_table = NULL;
- rdev->rswitch->set_domain = NULL;
- rdev->rswitch->get_domain = NULL;
- rdev->rswitch->em_init = NULL;
- rdev->rswitch->em_handle = NULL;
-
- return 0;
-}
-
-DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_switch_init);
_
Patches currently in -mm which might be from alexandre.bounine@xxxxxxx are
origin.patch
linux-next.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
