Subject: + rtc-ab8540-add-second-resolution-to-rtc-driver.patch added to -mm tree
To: alexandre.torgue@xxxxxx,julien.delacou@xxxxxxxxxxxxxx,lee.jones@xxxxxxxxxx,linus.walleij@xxxxxxxxxx,sameo@xxxxxxxxxxxxxxx
From: akpm@xxxxxxxxxxxxxxxxxxxx
Date: Wed, 29 May 2013 14:09:33 -0700
The patch titled
Subject: drivers/rtc/rtc-ab8500.c: add second resolution to rtc driver
has been added to the -mm tree. Its filename is
rtc-ab8540-add-second-resolution-to-rtc-driver.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Alexandre Torgue <alexandre.torgue@xxxxxx>
Subject: drivers/rtc/rtc-ab8500.c: add second resolution to rtc driver
Android expects the RTC to have second resolution. On ab8540 cut2 RTC
block has a new register which allows setting seconds for wakeup alarms.
Existing registers (minutes hi, mid and low) have seen their offsets
changed. Here is the new mapping:
* AlarmSec (A) 0x22
* AlarmMinLow (M) from 0x8 to 0x23
* AlarmMinMid (M) from 0x9 to 0x24
* AlarmMinHigh (M) from 0xA to 0x25
Signed-off-by: Julien Delacou <julien.delacou@xxxxxxxxxxxxxx>
Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-ab8500.c | 63 ++++++++++++++++++++++++++++++++++++-
1 file changed, 62 insertions(+), 1 deletion(-)
diff -puN drivers/rtc/rtc-ab8500.c~rtc-ab8540-add-second-resolution-to-rtc-driver drivers/rtc/rtc-ab8500.c
--- a/drivers/rtc/rtc-ab8500.c~rtc-ab8540-add-second-resolution-to-rtc-driver
+++ a/drivers/rtc/rtc-ab8500.c
@@ -35,6 +35,10 @@
#define AB8500_RTC_FORCE_BKUP_REG 0x0D
#define AB8500_RTC_CALIB_REG 0x0E
#define AB8500_RTC_SWITCH_STAT_REG 0x0F
+#define AB8540_RTC_ALRM_SEC 0x22
+#define AB8540_RTC_ALRM_MIN_LOW_REG 0x23
+#define AB8540_RTC_ALRM_MIN_MID_REG 0x24
+#define AB8540_RTC_ALRM_MIN_HI_REG 0x25
/* RtcReadRequest bits */
#define RTC_READ_REQUEST 0x01
@@ -58,6 +62,11 @@ static const u8 ab8500_rtc_alarm_regs[]
AB8500_RTC_ALRM_MIN_LOW_REG
};
+static const u8 ab8540_rtc_alarm_regs[] = {
+ AB8540_RTC_ALRM_MIN_HI_REG, AB8540_RTC_ALRM_MIN_MID_REG,
+ AB8540_RTC_ALRM_MIN_LOW_REG, AB8540_RTC_ALRM_SEC
+};
+
/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
static unsigned long get_elapsed_seconds(int year)
{
@@ -267,6 +276,42 @@ static int ab8500_rtc_set_alarm(struct d
return ab8500_rtc_irq_enable(dev, alarm->enabled);
}
+static int ab8540_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ int retval, i;
+ unsigned char buf[ARRAY_SIZE(ab8540_rtc_alarm_regs)];
+ unsigned long mins, secs = 0;
+
+ if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
+ dev_dbg(dev, "year should be equal to or greater than %d\n",
+ AB8500_RTC_EPOCH);
+ return -EINVAL;
+ }
+
+ /* Get the number of seconds since 1970 */
+ rtc_tm_to_time(&alarm->time, &secs);
+
+ /*
+ * Convert it to the number of seconds since 01-01-2000 00:00:00
+ */
+ secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
+ mins = secs / 60;
+
+ buf[3] = secs % 60;
+ buf[2] = mins & 0xFF;
+ buf[1] = (mins >> 8) & 0xFF;
+ buf[0] = (mins >> 16) & 0xFF;
+
+ /* Set the alarm time */
+ for (i = 0; i < ARRAY_SIZE(ab8540_rtc_alarm_regs); i++) {
+ retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+ ab8540_rtc_alarm_regs[i], buf[i]);
+ if (retval < 0)
+ return retval;
+ }
+
+ return ab8500_rtc_irq_enable(dev, alarm->enabled);
+}
static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
{
@@ -389,8 +434,22 @@ static const struct rtc_class_ops ab8500
.alarm_irq_enable = ab8500_rtc_irq_enable,
};
+static const struct rtc_class_ops ab8540_rtc_ops = {
+ .read_time = ab8500_rtc_read_time,
+ .set_time = ab8500_rtc_set_time,
+ .read_alarm = ab8500_rtc_read_alarm,
+ .set_alarm = ab8540_rtc_set_alarm,
+ .alarm_irq_enable = ab8500_rtc_irq_enable,
+};
+
+static struct platform_device_id ab85xx_rtc_ids[] = {
+ { "ab8500-rtc", (kernel_ulong_t)&ab8500_rtc_ops, },
+ { "ab8540-rtc", (kernel_ulong_t)&ab8540_rtc_ops, },
+};
+
static int ab8500_rtc_probe(struct platform_device *pdev)
{
+ const struct platform_device_id *platid = platform_get_device_id(pdev);
int err;
struct rtc_device *rtc;
u8 rtc_ctrl;
@@ -423,7 +482,8 @@ static int ab8500_rtc_probe(struct platf
device_init_wakeup(&pdev->dev, true);
rtc = devm_rtc_device_register(&pdev->dev, "ab8500-rtc",
- &ab8500_rtc_ops, THIS_MODULE);
+ (struct rtc_class_ops *)platid->driver_data,
+ THIS_MODULE);
if (IS_ERR(rtc)) {
dev_err(&pdev->dev, "Registration failed\n");
err = PTR_ERR(rtc);
@@ -461,6 +521,7 @@ static struct platform_driver ab8500_rtc
},
.probe = ab8500_rtc_probe,
.remove = ab8500_rtc_remove,
+ .id_table = ab85xx_rtc_ids,
};
module_platform_driver(ab8500_rtc_driver);
_
Patches currently in -mm which might be from alexandre.torgue@xxxxxx are
mfd-ab8540-add-device-for-new-rtc-version-on-ab8540-cut2.patch
rtc-ab8540-add-second-resolution-to-rtc-driver.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
