The patch titled
Subject: drivers/rtc/rtc-max6902.c: use register defines instead of magic numbers
has been removed from the -mm tree. Its filename was
drivers-rtc-rtc-max6902c-use-register-defines-instead-of-magic-numbers.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Axel Lin <axel.lin@xxxxxxxxxx>
Subject: drivers/rtc/rtc-max6902.c: use register defines instead of magic numbers
Current code has defines for registers, use the defines rather than magic
numbers.
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
Cc: Raphael Assenat <raph@xxxxxxxxxxx>
Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Wu Fengguang <fengguang.wu@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-max6902.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff -puN drivers/rtc/rtc-max6902.c~drivers-rtc-rtc-max6902c-use-register-defines-instead-of-magic-numbers drivers/rtc/rtc-max6902.c
--- a/drivers/rtc/rtc-max6902.c~drivers-rtc-rtc-max6902c-use-register-defines-instead-of-magic-numbers
+++ a/drivers/rtc/rtc-max6902.c
@@ -93,24 +93,24 @@ static int max6902_set_time(struct devic
dt->tm_year = dt->tm_year + 1900;
/* Remove write protection */
- max6902_set_reg(dev, 0xF, 0);
+ max6902_set_reg(dev, MAX6902_REG_CONTROL, 0);
- max6902_set_reg(dev, 0x01, bin2bcd(dt->tm_sec));
- max6902_set_reg(dev, 0x03, bin2bcd(dt->tm_min));
- max6902_set_reg(dev, 0x05, bin2bcd(dt->tm_hour));
-
- max6902_set_reg(dev, 0x07, bin2bcd(dt->tm_mday));
- max6902_set_reg(dev, 0x09, bin2bcd(dt->tm_mon + 1));
- max6902_set_reg(dev, 0x0B, bin2bcd(dt->tm_wday));
- max6902_set_reg(dev, 0x0D, bin2bcd(dt->tm_year % 100));
- max6902_set_reg(dev, 0x13, bin2bcd(dt->tm_year / 100));
+ max6902_set_reg(dev, MAX6902_REG_SECONDS, bin2bcd(dt->tm_sec));
+ max6902_set_reg(dev, MAX6902_REG_MINUTES, bin2bcd(dt->tm_min));
+ max6902_set_reg(dev, MAX6902_REG_HOURS, bin2bcd(dt->tm_hour));
+
+ max6902_set_reg(dev, MAX6902_REG_DATE, bin2bcd(dt->tm_mday));
+ max6902_set_reg(dev, MAX6902_REG_MONTH, bin2bcd(dt->tm_mon + 1));
+ max6902_set_reg(dev, MAX6902_REG_DAY, bin2bcd(dt->tm_wday));
+ max6902_set_reg(dev, MAX6902_REG_YEAR, bin2bcd(dt->tm_year % 100));
+ max6902_set_reg(dev, MAX6902_REG_CENTURY, bin2bcd(dt->tm_year / 100));
/* Compulab used a delay here. However, the datasheet
* does not mention a delay being required anywhere... */
/* delay(2000); */
/* Write protect */
- max6902_set_reg(dev, 0xF, 0x80);
+ max6902_set_reg(dev, MAX6902_REG_CONTROL, 0x80);
return 0;
}
_
Patches currently in -mm which might be from axel.lin@xxxxxxxxxx are
origin.patch
linux-next.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
