The patch titled
Subject: drivers/video: implement a simple framebuffer driver
has been added to the -mm tree. Its filename is
drivers-video-implement-a-simple-framebuffer-driver.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Subject: drivers/video: implement a simple framebuffer driver
A simple frame-buffer describes a raw memory region that may be rendered
to, with the assumption that the display hardware has already been set up
to scan out from that buffer.
This is useful in cases where a bootloader exists and has set up the
display hardware, but a Linux driver doesn't yet exist for the display
hardware.
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Olof Johansson <olof@xxxxxxxxx>
Cc: Rob Clark <robclark@xxxxxxxxx>
Cc: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/video/simple-framebuffer.txt | 25 +
drivers/video/Kconfig | 17
drivers/video/Makefile | 1
drivers/video/simplefb.c | 234 ++++++++++
4 files changed, 277 insertions(+)
diff -puN /dev/null Documentation/devicetree/bindings/video/simple-framebuffer.txt
--- /dev/null
+++ a/Documentation/devicetree/bindings/video/simple-framebuffer.txt
@@ -0,0 +1,25 @@
+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+ - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+
+Example:
+
+ framebuffer {
+ compatible = "simple-framebuffer";
+ reg = <0x1d385000 (1600 * 1200 * 2)>;
+ width = <1600>;
+ height = <1200>;
+ stride = <(1600 * 2)>;
+ format = "r5g6b5";
+ };
diff -puN drivers/video/Kconfig~drivers-video-implement-a-simple-framebuffer-driver drivers/video/Kconfig
--- a/drivers/video/Kconfig~drivers-video-implement-a-simple-framebuffer-driver
+++ a/drivers/video/Kconfig
@@ -2451,6 +2451,23 @@ config FB_HYPERV
help
This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
+config FB_SIMPLE
+ bool "Simple framebuffer support"
+ depends on (FB = y) && OF
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y if you want support for a simple frame-buffer.
+
+ This driver assumes that the display hardware has been initialized
+ before the kernel boots, and the kernel will simply render to the
+ pre-allocated frame buffer surface.
+
+ Configuration re: surface address, size, and format must be provided
+ through device tree, or potentially plain old platform data in the
+ future.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/omap2/Kconfig"
source "drivers/video/exynos/Kconfig"
diff -puN drivers/video/Makefile~drivers-video-implement-a-simple-framebuffer-driver drivers/video/Makefile
--- a/drivers/video/Makefile~drivers-video-implement-a-simple-framebuffer-driver
+++ a/drivers/video/Makefile
@@ -166,6 +166,7 @@ obj-$(CONFIG_FB_MX3) += mx3fb.o
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
obj-$(CONFIG_FB_MXS) += mxsfb.o
obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
+obj-$(CONFIG_FB_SIMPLE) += simplefb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
diff -puN /dev/null drivers/video/simplefb.c
--- /dev/null
+++ a/drivers/video/simplefb.c
@@ -0,0 +1,234 @@
+/*
+ * Simplest possible simple frame-buffer driver, as a platform device
+ *
+ * Copyright (c) 2013, Stephen Warren
+ *
+ * Based on q40fb.c, which was:
+ * Copyright (C) 2001 Richard Zidlicky <rz@xxxxxxxxxxxxxx>
+ *
+ * Also based on offb.c, which was:
+ * Copyright (C) 1997 Geert Uytterhoeven
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static struct fb_fix_screeninfo simplefb_fix = {
+ .id = "simple",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo simplefb_var = {
+ .height = -1,
+ .width = -1,
+ .activate = FB_ACTIVATE_NOW,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ u32 *pal = info->pseudo_palette;
+ u32 cr = red >> (16 - info->var.red.length);
+ u32 cg = green >> (16 - info->var.green.length);
+ u32 cb = blue >> (16 - info->var.blue.length);
+ u32 value;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ value = (cr << info->var.red.offset) |
+ (cg << info->var.green.offset) |
+ (cb << info->var.blue.offset);
+ if (info->var.transp.length > 0) {
+ u32 mask = (1 << info->var.transp.length) - 1;
+ mask <<= info->var.transp.offset;
+ value |= mask;
+ }
+ pal[regno] = value;
+
+ return 0;
+}
+
+static struct fb_ops simplefb_ops = {
+ .owner = THIS_MODULE,
+ .fb_setcolreg = simplefb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+struct simplefb_format {
+ const char *name;
+ u32 bits_per_pixel;
+ struct fb_bitfield red;
+ struct fb_bitfield green;
+ struct fb_bitfield blue;
+ struct fb_bitfield transp;
+};
+
+struct simplefb_format simplefb_formats[] = {
+ { "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0} },
+};
+
+struct simplefb_params {
+ u32 width;
+ u32 height;
+ u32 stride;
+ struct simplefb_format *format;
+};
+
+static int simplefb_parse_dt(struct platform_device *pdev,
+ struct simplefb_params *params)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+ const char *format;
+ int i;
+
+ ret = of_property_read_u32(np, "width", ¶ms->width);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse width property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "height", ¶ms->height);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse height property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "stride", ¶ms->stride);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse stride property\n");
+ return ret;
+ }
+
+ ret = of_property_read_string(np, "format", &format);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse format property\n");
+ return ret;
+ }
+ params->format = NULL;
+ for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) {
+ if (strcmp(format, simplefb_formats[i].name))
+ continue;
+ params->format = &simplefb_formats[i];
+ break;
+ }
+ if (!params->format) {
+ dev_err(&pdev->dev, "Invalid format value\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int simplefb_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct simplefb_params params;
+ struct fb_info *info;
+ struct resource *mem;
+
+ if (fb_get_options("simplefb", NULL))
+ return -ENODEV;
+
+ ret = simplefb_parse_dt(pdev, ¶ms);
+ if (ret)
+ return ret;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "No memory resource\n");
+ return -EINVAL;
+ }
+
+ info = framebuffer_alloc(sizeof(u32) * 16, &pdev->dev);
+ if (!info)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, info);
+
+ info->fix = simplefb_fix;
+ info->fix.smem_start = mem->start;
+ info->fix.smem_len = resource_size(mem);
+ info->fix.line_length = params.stride;
+
+ info->var = simplefb_var;
+ info->var.xres = params.width;
+ info->var.yres = params.height;
+ info->var.xres_virtual = params.width;
+ info->var.yres_virtual = params.height;
+ info->var.bits_per_pixel = params.format->bits_per_pixel;
+ info->var.red = params.format->red;
+ info->var.green = params.format->green;
+ info->var.blue = params.format->blue;
+ info->var.transp = params.format->transp;
+
+ info->fbops = &simplefb_ops;
+ info->flags = FBINFO_DEFAULT;
+ info->screen_base = devm_ioremap(&pdev->dev, info->fix.smem_start,
+ info->fix.smem_len);
+ if (!info->screen_base) {
+ framebuffer_release(info);
+ return -ENODEV;
+ }
+ info->pseudo_palette = (void *)(info + 1);
+
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret);
+ framebuffer_release(info);
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node);
+
+ return 0;
+}
+
+static int simplefb_remove(struct platform_device *pdev)
+{
+ struct fb_info *info = platform_get_drvdata(pdev);
+
+ unregister_framebuffer(info);
+ framebuffer_release(info);
+
+ return 0;
+}
+
+static const struct of_device_id simplefb_of_match[] = {
+ { .compatible = "simple-framebuffer", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, simplefb_of_match);
+
+static struct platform_driver simplefb_driver = {
+ .driver = {
+ .name = "simple-framebuffer",
+ .owner = THIS_MODULE,
+ .of_match_table = simplefb_of_match,
+ },
+ .probe = simplefb_probe,
+ .remove = simplefb_remove,
+};
+module_platform_driver(simplefb_driver);
+
+MODULE_AUTHOR("Stephen Warren <swarren@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Simple framebuffer driver");
+MODULE_LICENSE("GPL v2");
_
Patches currently in -mm which might be from swarren@xxxxxxxxxxxxx are
linux-next.patch
drivers-video-implement-a-simple-framebuffer-driver.patch
drivers-video-implement-a-simple-framebuffer-driver-fix.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
