The patch titled Subject: headers_install.pl: convert to headers_install.sh has been added to the -mm tree. Its filename is headers_installpl-convert-to-headers_installsh.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Rob Landley <rob@xxxxxxxxxxx> Subject: headers_install.pl: convert to headers_install.sh Remove perl from make headers_install by replacing a perl script (doing a simple regex search and replace) with a smaller, faster, simpler, POSIX-2008 shell script implementation. The new shell script is a single for loop calling sed and piping its output through unifdef to produce the target file. Same as last time except for minor tweak to deal with code review from here: http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00078.html (Note that this drops the "arch" argument, which isn't used. Kbuild already points to the right input files on the command line.) Signed-off-by: Rob Landley <rob@xxxxxxxxxxx> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Cc: Josh Boyer <jwboyer@xxxxxxxxxx> Cc: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx> Cc: David Howells <dhowell@xxxxxxxxxx> Cc: Michal Marek <mmarek@xxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- scripts/Makefile.headersinst | 4 +- scripts/headers_install.pl | 63 --------------------------------- scripts/headers_install.sh | 43 ++++++++++++++++++++++ 3 files changed, 45 insertions(+), 65 deletions(-) diff -puN scripts/Makefile.headersinst~headers_installpl-convert-to-headers_installsh scripts/Makefile.headersinst --- a/scripts/Makefile.headersinst~headers_installpl-convert-to-headers_installsh +++ a/scripts/Makefile.headersinst @@ -71,7 +71,7 @@ printdir = $(patsubst $(INSTALL_HDR_PATH quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\ file$(if $(word 2, $(all-files)),s)) cmd_install = \ - $(PERL) $< $(installdir) $(SRCARCH) $(input-files); \ + $(CONFIG_SHELL) $< $(installdir) $(input-files); \ for F in $(wrapper-files); do \ echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \ done; \ @@ -97,7 +97,7 @@ __headersinst: $(subdirs) $(install-file @: targets += $(install-file) -$(install-file): scripts/headers_install.pl $(input-files) FORCE +$(install-file): scripts/headers_install.sh $(input-files) FORCE $(if $(unwanted),$(call cmd,remove),) $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@))) $(call if_changed,install) diff -puN scripts/headers_install.pl~headers_installpl-convert-to-headers_installsh /dev/null --- a/scripts/headers_install.pl +++ /dev/null @@ -1,63 +0,0 @@ -#!/usr/bin/perl -w -# -# headers_install prepare the listed header files for use in -# user space and copy the files to their destination. -# -# Usage: headers_install.pl readdir installdir arch [files...] -# installdir: dir to install the files to -# arch: current architecture -# arch is used to force a reinstallation when the arch -# changes because kbuild then detect a command line change. -# files: list of files to check -# -# Step in preparation for users space: -# 1) Drop all use of compiler.h definitions -# 2) Drop include of compiler.h -# 3) Drop all sections defined out by __KERNEL__ (using unifdef) - -use strict; - -my ($installdir, $arch, @files) = @ARGV; - -my $unifdef = "scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__"; - -foreach my $filename (@files) { - my $file = $filename; - $file =~ s!^.*/!!; - - my $tmpfile = "$installdir/$file.tmp"; - - open(my $in, '<', $filename) - or die "$filename: $!\n"; - open(my $out, '>', $tmpfile) - or die "$tmpfile: $!\n"; - while (my $line = <$in>) { - $line =~ s/([\s(])__user\s/$1/g; - $line =~ s/([\s(])__force\s/$1/g; - $line =~ s/([\s(])__iomem\s/$1/g; - $line =~ s/\s__attribute_const__\s/ /g; - $line =~ s/\s__attribute_const__$//g; - $line =~ s/\b__packed\b/__attribute__((packed))/g; - $line =~ s/^#include <linux\/compiler.h>//; - $line =~ s/(^|\s)(inline)\b/$1__$2__/g; - $line =~ s/(^|\s)(asm)\b(\s|[(]|$)/$1__$2__$3/g; - $line =~ s/(^|\s|[(])(volatile)\b(\s|[(]|$)/$1__$2__$3/g; - $line =~ s/#ifndef\s+_UAPI/#ifndef /; - $line =~ s/#define\s+_UAPI/#define /; - $line =~ s!#endif\s+/[*]\s*_UAPI!#endif /* !; - printf {$out} "%s", $line; - } - close $out; - close $in; - - system $unifdef . " $tmpfile > $installdir/$file"; - # unifdef will exit 0 on success, and will exit 1 when the - # file was processed successfully but no changes were made, - # so abort only when it's higher than that. - my $e = $? >> 8; - if ($e > 1) { - die "$tmpfile: $!\n"; - } - unlink $tmpfile; -} -exit 0; diff -puN scripts/headers_install.sh~headers_installpl-convert-to-headers_installsh scripts/headers_install.sh --- a/scripts/headers_install.sh~headers_installpl-convert-to-headers_installsh +++ a/scripts/headers_install.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +if [ $# -lt 1 ] +then + echo "Usage: headers_install.sh OUTDIR [FILES...] + echo + echo "Prepares kernel header files for use by user space, by removing" + echo "all compiler.h definitions and #includes, removing any" + echo "#ifdef __KERNEL__ sections, and putting __underscores__ around" + echo "asm/inline/volatile keywords." + echo + echo "OUTDIR: directory to write each userspace header FILE to." + echo "FILES: list of header files to operate on." + + exit 1 +fi + +# Grab arguments + +OUTDIR="$1" +shift + +# Iterate through files listed on command line + +FILE= +trap 'rm -f "$OUTDIR/$FILE" "$OUTDIR/$FILE.sed"' EXIT +for i in "$@" +do + FILE="$(basename "$i")" + sed -r \ + -e 's/([ \t(])(__user|__force|__iomem)[ \t]/\1/g' \ + -e 's/__attribute_const__([ \t]|$)/\1/g' \ + -e 's@^#include <linux/compiler.h>@@' \ + -e 's/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$)/\1__attribute__((packed))\2/g' \ + -e 's/(^|[ \t(])(inline|asm|volatile)([ \t(]|$)/\1__\2__\3/g' \ + -e 's@#(ifndef|define|endif[ \t]*/[*])[ \t]*_UAPI@#\1 @' \ + "$i" > "$OUTDIR/$FILE.sed" || exit 1 + scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__ "$OUTDIR/$FILE.sed" \ + > "$OUTDIR/$FILE" + [ $? -gt 1 ] && exit 1 + rm -f "$OUTDIR/$FILE.sed" +done +trap - EXIT _ Patches currently in -mm which might be from rob@xxxxxxxxxxx are origin.patch linux-next.patch x86-make-mem=-option-to-work-for-efi-platform.patch mkcapflagspl-convert-to-mkcapflagssh.patch headers_installpl-convert-to-headers_installsh.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html