The patch titled Subject: ARM: mach-imx: support for DryIce RTC in i.MX53 has been removed from the -mm tree. Its filename was arm-mach-imx-support-for-dryice-rtc-in-imx53.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Roland Stigge <stigge@xxxxxxxxx> Subject: ARM: mach-imx: support for DryIce RTC in i.MX53 Enable support for i.MX53 in addition to i.MX25 by providing a dummy clock on i.MX53 since this one doesn't have a separate clock for internal RTC but the driver requests one. Signed-off-by: Roland Stigge <stigge@xxxxxxxxx> Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx> Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> Cc: Russell King <linux@xxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-imx/clk-imx51-imx53.c | 1 + 1 file changed, 1 insertion(+) diff -puN arch/arm/mach-imx/clk-imx51-imx53.c~arm-mach-imx-support-for-dryice-rtc-in-imx53 arch/arm/mach-imx/clk-imx51-imx53.c --- a/arch/arm/mach-imx/clk-imx51-imx53.c~arm-mach-imx-support-for-dryice-rtc-in-imx53 +++ a/arch/arm/mach-imx/clk-imx51-imx53.c @@ -466,6 +466,7 @@ int __init mx53_clocks_init(unsigned lon clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can"); clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can"); clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can"); + clk_register_clkdev(clk[dummy], NULL, "53fa4000.rtc"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); _ Patches currently in -mm which might be from stigge@xxxxxxxxx are linux-next.patch rtc-imxdi-support-for-imx53.patch rtc-imxdi-add-devicetree-support.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html