The patch titled
Subject: backlight: remove ProGear driver
has been added to the -mm tree. Its filename is
backlight-remove-progear-driver.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
Subject: backlight: remove ProGear driver
This driver was for the ProGear webpad device which was produced in
2000/2001 and is not available on a market. I no longer have this
hardware so can not even check how Linux works on it.
Signed-off-by: Marcin Juszkiewicz <marcin@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/video/backlight/Kconfig | 7 -
drivers/video/backlight/Makefile | 1
drivers/video/backlight/progear_bl.c | 162 -------------------------
3 files changed, 170 deletions(-)
diff -puN drivers/video/backlight/Kconfig~backlight-remove-progear-driver drivers/video/backlight/Kconfig
--- a/drivers/video/backlight/Kconfig~backlight-remove-progear-driver
+++ a/drivers/video/backlight/Kconfig
@@ -229,13 +229,6 @@ config BACKLIGHT_HP700
If you have an HP Jornada 700 series,
say Y to include backlight control driver.
-config BACKLIGHT_PROGEAR
- tristate "Frontpath ProGear Backlight Driver"
- depends on PCI && X86
- help
- If you have a Frontpath ProGear say Y to enable the
- backlight driver.
-
config BACKLIGHT_CARILLO_RANCH
tristate "Intel Carillo Ranch Backlight Driver"
depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
diff -puN drivers/video/backlight/Makefile~backlight-remove-progear-driver drivers/video/backlight/Makefile
--- a/drivers/video/backlight/Makefile~backlight-remove-progear-driver
+++ a/drivers/video/backlight/Makefile
@@ -28,7 +28,6 @@ obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639
obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
-obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o
diff -puN drivers/video/backlight/progear_bl.c~backlight-remove-progear-driver /dev/null
--- a/drivers/video/backlight/progear_bl.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Backlight Driver for Frontpath ProGear HX1050+
- *
- * Copyright (c) 2006 Marcin Juszkiewicz
- *
- * Based on Progear LCD driver by M Schacht
- * <mschacht at alumni dot washington dot edu>
- *
- * Based on Sharp's Corgi Backlight Driver
- * Based on Backlight Driver for HP Jornada 680
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/fb.h>
-#include <linux/backlight.h>
-#include <linux/pci.h>
-
-#define PMU_LPCR 0xB0
-#define SB_MPS1 0x61
-#define HW_LEVEL_MAX 0x77
-#define HW_LEVEL_MIN 0x4f
-
-static struct pci_dev *pmu_dev = NULL;
-static struct pci_dev *sb_dev = NULL;
-
-static int progearbl_set_intensity(struct backlight_device *bd)
-{
- int intensity = bd->props.brightness;
-
- if (bd->props.power != FB_BLANK_UNBLANK)
- intensity = 0;
- if (bd->props.fb_blank != FB_BLANK_UNBLANK)
- intensity = 0;
-
- pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
-
- return 0;
-}
-
-static int progearbl_get_intensity(struct backlight_device *bd)
-{
- u8 intensity;
- pci_read_config_byte(pmu_dev, PMU_LPCR, &intensity);
-
- return intensity - HW_LEVEL_MIN;
-}
-
-static const struct backlight_ops progearbl_ops = {
- .get_brightness = progearbl_get_intensity,
- .update_status = progearbl_set_intensity,
-};
-
-static int progearbl_probe(struct platform_device *pdev)
-{
- struct backlight_properties props;
- u8 temp;
- struct backlight_device *progear_backlight_device;
- int ret;
-
- pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, NULL);
- if (!pmu_dev) {
- pr_err("ALI M7101 PMU not found.\n");
- return -ENODEV;
- }
-
- sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
- if (!sb_dev) {
- pr_err("ALI 1533 SB not found.\n");
- ret = -ENODEV;
- goto put_pmu;
- }
-
- /* Set SB_MPS1 to enable brightness control. */
- pci_read_config_byte(sb_dev, SB_MPS1, &temp);
- pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
-
- memset(&props, 0, sizeof(struct backlight_properties));
- props.type = BACKLIGHT_RAW;
- props.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
- progear_backlight_device = backlight_device_register("progear-bl",
- &pdev->dev, NULL,
- &progearbl_ops,
- &props);
- if (IS_ERR(progear_backlight_device)) {
- ret = PTR_ERR(progear_backlight_device);
- goto put_sb;
- }
-
- platform_set_drvdata(pdev, progear_backlight_device);
-
- progear_backlight_device->props.power = FB_BLANK_UNBLANK;
- progear_backlight_device->props.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
- progearbl_set_intensity(progear_backlight_device);
-
- return 0;
-put_sb:
- pci_dev_put(sb_dev);
-put_pmu:
- pci_dev_put(pmu_dev);
- return ret;
-}
-
-static int progearbl_remove(struct platform_device *pdev)
-{
- struct backlight_device *bd = platform_get_drvdata(pdev);
- backlight_device_unregister(bd);
-
- return 0;
-}
-
-static struct platform_driver progearbl_driver = {
- .probe = progearbl_probe,
- .remove = progearbl_remove,
- .driver = {
- .name = "progear-bl",
- },
-};
-
-static struct platform_device *progearbl_device;
-
-static int __init progearbl_init(void)
-{
- int ret = platform_driver_register(&progearbl_driver);
-
- if (ret)
- return ret;
- progearbl_device = platform_device_register_simple("progear-bl", -1,
- NULL, 0);
- if (IS_ERR(progearbl_device)) {
- platform_driver_unregister(&progearbl_driver);
- return PTR_ERR(progearbl_device);
- }
-
- return 0;
-}
-
-static void __exit progearbl_exit(void)
-{
- pci_dev_put(pmu_dev);
- pci_dev_put(sb_dev);
-
- platform_device_unregister(progearbl_device);
- platform_driver_unregister(&progearbl_driver);
-}
-
-module_init(progearbl_init);
-module_exit(progearbl_exit);
-
-MODULE_AUTHOR("Marcin Juszkiewicz <linux@xxxxxxxxxx>");
-MODULE_DESCRIPTION("ProGear Backlight Driver");
-MODULE_LICENSE("GPL");
_
Patches currently in -mm which might be from marcin.juszkiewicz@xxxxxxxxxx are
backlight-remove-progear-driver.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
