The patch titled Subject: mqueue: separate mqueue default value from maximum value has been removed from the -mm tree. Its filename was mqueue-separate-mqueue-default-value-from-maximum-value-v2.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ From: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxxxxxxx> Subject: mqueue: separate mqueue default value from maximum value commit b231cca438 ("message queues: increase range limits") changed mqueue default value when attr parameter is specified NULL from hard coded value to fs.mqueue.{msg,msgsize}_max sysctl value. This made large side effect. When user need to use two mqueue applications 1) using !NULL attr parameter and it require big message size and 2) using NULL attr parameter and only need small size message, app (1) require to raise fs.mqueue.msgsize_max and app (2) consume large memory size even though it doesn't need. Doug Ledford propsed to switch back it to static hard coded value. However it also has a compatibility problem. Some applications might started depend on the default value is tunable. The solution is to separate default value from maximum value. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxxxxxxx> Signed-off-by: Doug Ledford <dledford@xxxxxxxxxx> Acked-by: Doug Ledford <dledford@xxxxxxxxxx> Acked-by: Joe Korty <joe.korty@xxxxxxxx> Cc: Amerigo Wang <amwang@xxxxxxxxxx> Acked-by: Serge E. Hallyn <serue@xxxxxxxxxx> Cc: Jiri Slaby <jslaby@xxxxxxx> Cc: Manfred Spraul <manfred@xxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- Documentation/sysctl/fs.txt | 7 +++++++ include/linux/ipc_namespace.h | 2 ++ ipc/mq_sysctl.c | 18 ++++++++++++++++++ ipc/mqueue.c | 9 ++++++--- 4 files changed, 33 insertions(+), 3 deletions(-) diff -puN Documentation/sysctl/fs.txt~mqueue-separate-mqueue-default-value-from-maximum-value-v2 Documentation/sysctl/fs.txt --- a/Documentation/sysctl/fs.txt~mqueue-separate-mqueue-default-value-from-maximum-value-v2 +++ a/Documentation/sysctl/fs.txt @@ -225,6 +225,13 @@ a queue must be less or equal then msg_m maximum message size value (it is every message queue's attribute set during its creation). +/proc/sys/fs/mqueue/msg_default is a read/write file for setting/getting the +default number of messages in a queue value if attr parameter of mq_open(2) is +NULL. If it exceed msg_max, the default value is initialized msg_max. + +/proc/sys/fs/mqueue/msgsize_default is a read/write file for setting/getting +the default message size value if attr parameter of mq_open(2) is NULL. If it +exceed msgsize_max, the default value is initialized msgsize_max. 4. /proc/sys/fs/epoll - Configuration options for the epoll interface -------------------------------------------------------- diff -puN include/linux/ipc_namespace.h~mqueue-separate-mqueue-default-value-from-maximum-value-v2 include/linux/ipc_namespace.h --- a/include/linux/ipc_namespace.h~mqueue-separate-mqueue-default-value-from-maximum-value-v2 +++ a/include/linux/ipc_namespace.h @@ -62,6 +62,8 @@ struct ipc_namespace { unsigned int mq_queues_max; /* initialized to DFLT_QUEUESMAX */ unsigned int mq_msg_max; /* initialized to DFLT_MSGMAX */ unsigned int mq_msgsize_max; /* initialized to DFLT_MSGSIZEMAX */ + unsigned int mq_msg_default; + unsigned int mq_msgsize_default; /* user_ns which owns the ipc ns */ struct user_namespace *user_ns; diff -puN ipc/mq_sysctl.c~mqueue-separate-mqueue-default-value-from-maximum-value-v2 ipc/mq_sysctl.c --- a/ipc/mq_sysctl.c~mqueue-separate-mqueue-default-value-from-maximum-value-v2 +++ a/ipc/mq_sysctl.c @@ -73,6 +73,24 @@ static ctl_table mq_sysctls[] = { .extra1 = &msg_maxsize_limit_min, .extra2 = &msg_maxsize_limit_max, }, + { + .procname = "msg_default", + .data = &init_ipc_ns.mq_msg_default, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_mq_dointvec_minmax, + .extra1 = &msg_max_limit_min, + .extra2 = &msg_max_limit_max, + }, + { + .procname = "msgsize_default", + .data = &init_ipc_ns.mq_msgsize_default, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_mq_dointvec_minmax, + .extra1 = &msg_maxsize_limit_min, + .extra2 = &msg_maxsize_limit_max, + }, {} }; diff -puN ipc/mqueue.c~mqueue-separate-mqueue-default-value-from-maximum-value-v2 ipc/mqueue.c --- a/ipc/mqueue.c~mqueue-separate-mqueue-default-value-from-maximum-value-v2 +++ a/ipc/mqueue.c @@ -145,9 +145,10 @@ static struct inode *mqueue_get_inode(st info->qsize = 0; info->user = NULL; /* set when all is ok */ memset(&info->attr, 0, sizeof(info->attr)); - info->attr.mq_maxmsg = min(ipc_ns->mq_msg_max, DFLT_MSG); - info->attr.mq_msgsize = - min(ipc_ns->mq_msgsize_max, DFLT_MSGSIZE); + info->attr.mq_maxmsg = min(ipc_ns->mq_msg_max, + ipc_ns->mq_msg_default); + info->attr.mq_msgsize = min(ipc_ns->mq_msgsize_max, + ipc_ns->mq_msgsize_default); if (attr) { info->attr.mq_maxmsg = attr->mq_maxmsg; info->attr.mq_msgsize = attr->mq_msgsize; @@ -1261,6 +1262,8 @@ int mq_init_ns(struct ipc_namespace *ns) ns->mq_queues_max = DFLT_QUEUESMAX; ns->mq_msg_max = DFLT_MSGMAX; ns->mq_msgsize_max = DFLT_MSGSIZEMAX; + ns->mq_msg_default = DFLT_MSG; + ns->mq_msgsize_default = DFLT_MSGSIZE; ns->mq_mnt = kern_mount_data(&mqueue_fs_type, ns); if (IS_ERR(ns->mq_mnt)) { _ Patches currently in -mm which might be from kosaki.motohiro@xxxxxxxxxxxxxx are origin.patch selftests-add-mq_open_tests.patch ipc-mqueue-improve-performance-of-send-recv.patch ipc-mqueue-correct-mq_attr_ok-test.patch ipc-mqueue-strengthen-checks-on-mqueue-creation.patch tools-selftests-add-mq_perf_tests.patch ipc-mqueue-add-rbtree-node-caching-support.patch c-r-prctl-add-ability-to-set-new-mm_struct-exe_file.patch c-r-prctl-add-ability-to-set-new-mm_struct-exe_file-update-after-mm-num_exe_file_vmas-removal.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html