The patch titled
Subject: leds: add LM3533 LED driver
has been added to the -mm tree. Its filename is
leds-add-lm3533-led-driver.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Johan Hovold <jhovold@xxxxxxxxx>
Subject: leds: add LM3533 LED driver
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting
power chips.
The chip provides 256 brightness levels, hardware accelerated blinking as
well as ambient-light-sensor and pwm input control.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
Cc: Richard Purdie <rpurdie@xxxxxxxxx>
Cc: Rob Landley <rob@xxxxxxxxxxx>
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Cc: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/ABI/testing/sysfs-class-led-driver-lm3533 | 58
drivers/leds/Kconfig | 13
drivers/leds/Makefile | 1
drivers/leds/leds-lm3533.c | 738 ++++++++++
4 files changed, 810 insertions(+)
diff -puN /dev/null Documentation/ABI/testing/sysfs-class-led-driver-lm3533
--- /dev/null
+++ a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
@@ -0,0 +1,58 @@
+What: /sys/class/leds/<led>/als
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@xxxxxxxxx>
+Description:
+ Set the ALS-control mode (0, 2, 3), where
+
+ 0 - disabled
+ 2 - ALS-mapper 2
+ 3 - ALS-mapper 3
+
+What: /sys/class/leds/<led>/falltime
+What: /sys/class/leds/<led>/risetime
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@xxxxxxxxx>
+Description:
+ Set the pattern generator fall and rise times (0..7), where
+
+ 0 - 2048 us
+ 1 - 262 ms
+ 2 - 524 ms
+ 3 - 1.049 s
+ 4 - 2.097 s
+ 5 - 4.194 s
+ 6 - 8.389 s
+ 7 - 16.78 s
+
+What: /sys/class/leds/<led>/id
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@xxxxxxxxx>
+Description:
+ Get the id of this led (0..3).
+
+What: /sys/class/leds/<led>/linear
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@xxxxxxxxx>
+Description:
+ Set the brightness-mapping mode (0, 1), where
+
+ 0 - exponential mode
+ 1 - linear mode
+
+What: /sys/class/leds/<led>/pwm
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@xxxxxxxxx>
+Description:
+ Set the PWM-input control mask (5 bits), where
+
+ bit 5 - PWM-input enabled in Zone 4
+ bit 4 - PWM-input enabled in Zone 3
+ bit 3 - PWM-input enabled in Zone 2
+ bit 2 - PWM-input enabled in Zone 1
+ bit 1 - PWM-input enabled in Zone 0
+ bit 0 - PWM-input enabled
diff -puN drivers/leds/Kconfig~leds-add-lm3533-led-driver drivers/leds/Kconfig
--- a/drivers/leds/Kconfig~leds-add-lm3533-led-driver
+++ a/drivers/leds/Kconfig
@@ -50,6 +50,19 @@ config LEDS_LM3530
controlled manually or using PWM input or using ambient
light automatically.
+config LEDS_LM3533
+ tristate "LED support for LM3533"
+ depends on LEDS_CLASS
+ depends on MFD_LM3533
+ help
+ This option enables support for the LEDs on National Semiconductor /
+ TI LM3533 Lighting Power chips.
+
+ The LEDs can be controlled directly, through PWM input, or by the
+ ambient-light-sensor interface. The chip supports
+ hardware-accelerated blinking with maximum on and off periods of 9.8
+ and 77 seconds respectively.
+
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
depends on LEDS_CLASS
diff -puN drivers/leds/Makefile~leds-add-lm3533-led-driver drivers/leds/Makefile
--- a/drivers/leds/Makefile~leds-add-lm3533-led-driver
+++ a/drivers/leds/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-at
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
+obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o
obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
diff -puN /dev/null drivers/leds/leds-lm3533.c
--- /dev/null
+++ a/drivers/leds/leds-lm3533.c
@@ -0,0 +1,738 @@
+/*
+ * leds-lm3533.c -- LM3533 LED driver
+ *
+ * Copyright (C) 2011-2012 Texas Instruments
+ *
+ * Author: Johan Hovold <jhovold@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/mfd/core.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/lm3533.h>
+
+
+#define LM3533_LVCTRLBANK_MIN 2
+#define LM3533_LVCTRLBANK_MAX 5
+#define LM3533_LVCTRLBANK_COUNT 4
+#define LM3533_RISEFALLTIME_MAX 7
+#define LM3533_ALS_LV_MIN 2
+#define LM3533_ALS_LV_MAX 3
+
+#define LM3533_REG_CTRLBANK_BCONF_BASE 0x1b
+#define LM3533_REG_PATTERN_ENABLE 0x28
+#define LM3533_REG_PATTERN_LOW_TIME_BASE 0x71
+#define LM3533_REG_PATTERN_HIGH_TIME_BASE 0x72
+#define LM3533_REG_PATTERN_RISETIME_BASE 0x74
+#define LM3533_REG_PATTERN_FALLTIME_BASE 0x75
+
+#define LM3533_REG_PATTERN_STEP 0x10
+
+#define LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK 0x04
+#define LM3533_REG_CTRLBANK_BCONF_ALS_MASK 0x03
+
+#define LM3533_LED_FLAG_PATTERN_ENABLE 1
+
+
+struct lm3533_led {
+ struct lm3533 *lm3533;
+ struct lm3533_ctrlbank cb;
+ struct led_classdev cdev;
+ int id;
+
+ struct mutex mutex;
+ unsigned long flags;
+
+ struct work_struct work;
+ u8 new_brightness;
+};
+
+
+static inline struct lm3533_led *to_lm3533_led(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct lm3533_led, cdev);
+}
+
+static inline int lm3533_led_get_ctrlbank_id(struct lm3533_led *led)
+{
+ return led->id + 2;
+}
+
+static inline u8 lm3533_led_get_lv_reg(struct lm3533_led *led, u8 base)
+{
+ return base + led->id;
+}
+
+static inline u8 lm3533_led_get_pattern(struct lm3533_led *led)
+{
+ return led->id;
+}
+
+static inline u8 lm3533_led_get_pattern_reg(struct lm3533_led *led,
+ u8 base)
+{
+ return base + lm3533_led_get_pattern(led) * LM3533_REG_PATTERN_STEP;
+}
+
+static int lm3533_led_pattern_enable(struct lm3533_led *led, int enable)
+{
+ u8 mask;
+ u8 val;
+ int pattern;
+ int state;
+ int ret = 0;
+
+ dev_dbg(led->cdev.dev, "%s - %d\n", __func__, enable);
+
+ mutex_lock(&led->mutex);
+
+ state = test_bit(LM3533_LED_FLAG_PATTERN_ENABLE, &led->flags);
+ if ((enable && state) || (!enable && !state))
+ goto out;
+
+ pattern = lm3533_led_get_pattern(led);
+ mask = 1 << (2 * pattern);
+
+ if (enable)
+ val = mask;
+ else
+ val = 0;
+
+ ret = lm3533_update(led->lm3533, LM3533_REG_PATTERN_ENABLE, val, mask);
+ if (ret) {
+ dev_err(led->cdev.dev, "failed to enable pattern %d (%d)\n",
+ pattern, enable);
+ goto out;
+ }
+
+ __change_bit(LM3533_LED_FLAG_PATTERN_ENABLE, &led->flags);
+out:
+ mutex_unlock(&led->mutex);
+
+ return ret;
+}
+
+static void lm3533_led_work(struct work_struct *work)
+{
+ struct lm3533_led *led = container_of(work, struct lm3533_led, work);
+
+ dev_dbg(led->cdev.dev, "%s - %u\n", __func__, led->new_brightness);
+
+ if (led->new_brightness == 0)
+ lm3533_led_pattern_enable(led, 0); /* disable blink */
+
+ lm3533_ctrlbank_set_brightness(&led->cb, led->new_brightness);
+}
+
+static void lm3533_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct lm3533_led *led = to_lm3533_led(cdev);
+
+ dev_dbg(led->cdev.dev, "%s - %d\n", __func__, value);
+
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static enum led_brightness lm3533_led_get(struct led_classdev *cdev)
+{
+ struct lm3533_led *led = to_lm3533_led(cdev);
+ u8 val;
+ int ret;
+
+ ret = lm3533_ctrlbank_get_brightness(&led->cb, &val);
+ if (ret)
+ return ret;
+
+ dev_dbg(led->cdev.dev, "%s - %u\n", __func__, val);
+
+ return val;
+}
+
+/* Pattern generator defines (delays in us). */
+#define LM3533_LED_DELAY1_VMIN 0x00
+#define LM3533_LED_DELAY2_VMIN 0x3d
+#define LM3533_LED_DELAY3_VMIN 0x80
+
+#define LM3533_LED_DELAY1_VMAX (LM3533_LED_DELAY2_VMIN - 1)
+#define LM3533_LED_DELAY2_VMAX (LM3533_LED_DELAY3_VMIN - 1)
+#define LM3533_LED_DELAY3_VMAX 0xff
+
+#define LM3533_LED_DELAY1_TMIN 16384U
+#define LM3533_LED_DELAY2_TMIN 1130496U
+#define LM3533_LED_DELAY3_TMIN 10305536U
+
+#define LM3533_LED_DELAY1_TMAX 999424U
+#define LM3533_LED_DELAY2_TMAX 9781248U
+#define LM3533_LED_DELAY3_TMAX 76890112U
+
+/* t_step = (t_max - t_min) / (v_max - v_min) */
+#define LM3533_LED_DELAY1_TSTEP 16384
+#define LM3533_LED_DELAY2_TSTEP 131072
+#define LM3533_LED_DELAY3_TSTEP 524288
+
+/* Delay limits for hardware accelerated blinking (in ms). */
+#define LM3533_LED_DELAY_ON_MAX \
+ ((LM3533_LED_DELAY2_TMAX + LM3533_LED_DELAY2_TSTEP / 2) / 1000)
+#define LM3533_LED_DELAY_OFF_MAX \
+ ((LM3533_LED_DELAY3_TMAX + LM3533_LED_DELAY3_TSTEP / 2) / 1000)
+
+/*
+ * Returns linear map of *t from [t_min,t_max] to [v_min,v_max] with a step
+ * size of t_step, where
+ *
+ * t_step = (t_max - t_min) / (v_max - v_min)
+ *
+ * and updates *t to reflect the mapped value.
+ */
+static u8 time_to_val(unsigned *t, unsigned t_min, unsigned t_step,
+ u8 v_min, u8 v_max)
+{
+ unsigned val;
+
+ val = (*t + t_step / 2 - t_min) / t_step + v_min;
+
+ *t = t_step * (val - v_min) + t_min;
+
+ return (u8)val;
+}
+
+/*
+ * Returns time code corresponding to *delay (in ms) and updates *delay to
+ * reflect actual hardware delay.
+ *
+ * Hardware supports 256 discrete delay times, divided into three groups with
+ * the following ranges and step-sizes:
+ *
+ * [ 16, 999] [0x00, 0x3e] step 16 ms
+ * [ 1130, 9781] [0x3d, 0x7f] step 131 ms
+ * [10306, 76890] [0x80, 0xff] step 524 ms
+ *
+ * Note that delay group 3 is only available for delay_off.
+ */
+static u8 lm3533_led_get_hw_delay(unsigned *delay)
+{
+ unsigned t;
+ u8 val;
+
+ t = *delay * 1000;
+
+ if (t >= (LM3533_LED_DELAY2_TMAX + LM3533_LED_DELAY3_TMIN) / 2) {
+ t = clamp(t, LM3533_LED_DELAY3_TMIN, LM3533_LED_DELAY3_TMAX);
+ val = time_to_val(&t, LM3533_LED_DELAY3_TMIN,
+ LM3533_LED_DELAY3_TSTEP,
+ LM3533_LED_DELAY3_VMIN,
+ LM3533_LED_DELAY3_VMAX);
+ } else if (t >= (LM3533_LED_DELAY1_TMAX + LM3533_LED_DELAY2_TMIN) / 2) {
+ t = clamp(t, LM3533_LED_DELAY2_TMIN, LM3533_LED_DELAY2_TMAX);
+ val = time_to_val(&t, LM3533_LED_DELAY2_TMIN,
+ LM3533_LED_DELAY2_TSTEP,
+ LM3533_LED_DELAY2_VMIN,
+ LM3533_LED_DELAY2_VMAX);
+ } else {
+ t = clamp(t, LM3533_LED_DELAY1_TMIN, LM3533_LED_DELAY1_TMAX);
+ val = time_to_val(&t, LM3533_LED_DELAY1_TMIN,
+ LM3533_LED_DELAY1_TSTEP,
+ LM3533_LED_DELAY1_VMIN,
+ LM3533_LED_DELAY1_VMAX);
+ }
+
+ *delay = (t + 500) / 1000;
+
+ return val;
+}
+
+/*
+ * Set delay register base to *delay (in ms) and update *delay to reflect
+ * actual hardware delay used.
+ */
+static u8 lm3533_led_delay_set(struct lm3533_led *led, u8 base,
+ unsigned long *delay)
+{
+ unsigned t;
+ u8 val;
+ u8 reg;
+ int ret;
+
+ t = (unsigned)*delay;
+
+ /* Delay group 3 is only available for low time (delay off). */
+ if (base != LM3533_REG_PATTERN_LOW_TIME_BASE)
+ t = min(t, LM3533_LED_DELAY2_TMAX / 1000);
+
+ val = lm3533_led_get_hw_delay(&t);
+
+ dev_dbg(led->cdev.dev, "%s - %lu: %u (0x%02x)\n", __func__,
+ *delay, t, val);
+ reg = lm3533_led_get_pattern_reg(led, base);
+ ret = lm3533_write(led->lm3533, reg, val);
+ if (ret)
+ dev_err(led->cdev.dev, "failed to set delay (%02x)\n", reg);
+
+ *delay = t;
+
+ return ret;
+}
+
+static int lm3533_led_delay_on_set(struct lm3533_led *led, unsigned long *t)
+{
+ return lm3533_led_delay_set(led, LM3533_REG_PATTERN_HIGH_TIME_BASE, t);
+}
+
+static int lm3533_led_delay_off_set(struct lm3533_led *led, unsigned long *t)
+{
+ return lm3533_led_delay_set(led, LM3533_REG_PATTERN_LOW_TIME_BASE, t);
+}
+
+static int lm3533_led_blink_set(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct lm3533_led *led = to_lm3533_led(cdev);
+ int ret;
+
+ dev_dbg(led->cdev.dev, "%s - on = %lu, off = %lu\n", __func__,
+ *delay_on, *delay_off);
+
+ if (*delay_on > LM3533_LED_DELAY_ON_MAX ||
+ *delay_off > LM3533_LED_DELAY_OFF_MAX)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ ret = lm3533_led_delay_on_set(led, delay_on);
+ if (ret)
+ return ret;
+
+ ret = lm3533_led_delay_off_set(led, delay_off);
+ if (ret)
+ return ret;
+
+ return lm3533_led_pattern_enable(led, 1);
+}
+
+static ssize_t show_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", led->id);
+}
+
+/*
+ * Pattern generator rise/fall times:
+ *
+ * 0 - 2048 us (default)
+ * 1 - 262 ms
+ * 2 - 524 ms
+ * 3 - 1.049 s
+ * 4 - 2.097 s
+ * 5 - 4.194 s
+ * 6 - 8.389 s
+ * 7 - 16.78 s
+ */
+static ssize_t show_risefalltime(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, u8 base)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ ssize_t ret;
+ u8 reg;
+ u8 val;
+
+ reg = lm3533_led_get_pattern_reg(led, base);
+ ret = lm3533_read(led->lm3533, reg, &val);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%x\n", val);
+}
+
+static ssize_t show_risetime(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return show_risefalltime(dev, attr, buf,
+ LM3533_REG_PATTERN_RISETIME_BASE);
+}
+
+static ssize_t show_falltime(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return show_risefalltime(dev, attr, buf,
+ LM3533_REG_PATTERN_FALLTIME_BASE);
+}
+
+static ssize_t store_risefalltime(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, u8 base)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 val;
+ u8 reg;
+ int ret;
+
+ if (kstrtou8(buf, 0, &val) || val > LM3533_RISEFALLTIME_MAX)
+ return -EINVAL;
+
+ reg = lm3533_led_get_pattern_reg(led, base);
+ ret = lm3533_write(led->lm3533, reg, val);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t store_risetime(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ return store_risefalltime(dev, attr, buf, len,
+ LM3533_REG_PATTERN_RISETIME_BASE);
+}
+
+static ssize_t store_falltime(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ return store_risefalltime(dev, attr, buf, len,
+ LM3533_REG_PATTERN_FALLTIME_BASE);
+}
+
+/*
+ * ALS-control setting:
+ *
+ * 0 - ALS disabled
+ * 2 - ALS-mapper 2
+ * 3 - ALS-mapper 3
+ */
+static ssize_t show_als(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 reg;
+ u8 val;
+ int als;
+ int ret;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ ret = lm3533_read(led->lm3533, reg, &val);
+ if (ret)
+ return ret;
+
+ als = val & LM3533_REG_CTRLBANK_BCONF_ALS_MASK;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", als);
+}
+
+static ssize_t store_als(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 als;
+ u8 reg;
+ u8 mask;
+ int ret;
+
+ if (kstrtou8(buf, 0, &als))
+ return -EINVAL;
+
+ if (als != 0 && (als < LM3533_ALS_LV_MIN || als > LM3533_ALS_LV_MAX))
+ return -EINVAL;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ mask = LM3533_REG_CTRLBANK_BCONF_ALS_MASK;
+
+ ret = lm3533_update(led->lm3533, reg, als, mask);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t show_linear(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 reg;
+ u8 val;
+ int linear;
+ int ret;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ ret = lm3533_read(led->lm3533, reg, &val);
+ if (ret)
+ return ret;
+
+ if (val & LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK)
+ linear = 1;
+ else
+ linear = 0;
+
+ return scnprintf(buf, PAGE_SIZE, "%x\n", linear);
+}
+
+static ssize_t store_linear(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ unsigned long linear;
+ u8 reg;
+ u8 mask;
+ u8 val;
+ int ret;
+
+ if (kstrtoul(buf, 0, &linear))
+ return -EINVAL;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ mask = LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK;
+
+ if (linear)
+ val = mask;
+ else
+ val = 0;
+
+ ret = lm3533_update(led->lm3533, reg, val, mask);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t show_pwm(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 val;
+ int ret;
+
+ ret = lm3533_ctrlbank_get_pwm(&led->cb, &val);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_pwm(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 val;
+ int ret;
+
+ if (kstrtou8(buf, 0, &val))
+ return -EINVAL;
+
+ ret = lm3533_ctrlbank_set_pwm(&led->cb, val);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static LM3533_ATTR_RW(als);
+static LM3533_ATTR_RW(falltime);
+static LM3533_ATTR_RO(id);
+static LM3533_ATTR_RW(linear);
+static LM3533_ATTR_RW(pwm);
+static LM3533_ATTR_RW(risetime);
+
+static struct attribute *lm3533_led_attributes[] = {
+ &dev_attr_als.attr,
+ &dev_attr_falltime.attr,
+ &dev_attr_id.attr,
+ &dev_attr_linear.attr,
+ &dev_attr_pwm.attr,
+ &dev_attr_risetime.attr,
+ NULL,
+};
+
+static umode_t lm3533_led_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ umode_t mode = attr->mode;
+
+ if (attr == &dev_attr_als.attr) {
+ if (!led->lm3533->have_als)
+ mode = 0;
+ }
+
+ return mode;
+};
+
+static struct attribute_group lm3533_led_attribute_group = {
+ .is_visible = lm3533_led_attr_is_visible,
+ .attrs = lm3533_led_attributes
+};
+
+static int __devinit lm3533_led_setup(struct lm3533_led *led,
+ struct lm3533_led_platform_data *pdata)
+{
+ int ret;
+
+ ret = lm3533_ctrlbank_set_max_current(&led->cb, pdata->max_current);
+ if (ret)
+ return ret;
+
+ return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
+}
+
+static int __devinit lm3533_led_probe(struct platform_device *pdev)
+{
+ struct lm3533 *lm3533;
+ struct lm3533_led_platform_data *pdata;
+ struct lm3533_led *led;
+ int ret;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ lm3533 = dev_get_drvdata(pdev->dev.parent);
+ if (!lm3533)
+ return -EINVAL;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ if (pdev->id < 0 || pdev->id >= LM3533_LVCTRLBANK_COUNT) {
+ dev_err(&pdev->dev, "illegal LED id %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->lm3533 = lm3533;
+ led->cdev.name = pdata->name;
+ led->cdev.default_trigger = pdata->default_trigger;
+ led->cdev.brightness_set = lm3533_led_set;
+ led->cdev.brightness_get = lm3533_led_get;
+ led->cdev.blink_set = lm3533_led_blink_set;
+ led->cdev.brightness = LED_OFF;
+ led->id = pdev->id;
+
+ mutex_init(&led->mutex);
+ INIT_WORK(&led->work, lm3533_led_work);
+
+ /* The class framework makes a callback to get brightness during
+ * registration so use parent device (for error reporting) until
+ * registered.
+ */
+ led->cb.lm3533 = lm3533;
+ led->cb.id = lm3533_led_get_ctrlbank_id(led);
+ led->cb.dev = lm3533->dev;
+
+ platform_set_drvdata(pdev, led);
+
+ ret = led_classdev_register(pdev->dev.parent, &led->cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
+ goto err_free;
+ }
+
+ led->cb.dev = led->cdev.dev;
+
+ ret = sysfs_create_group(&led->cdev.dev->kobj,
+ &lm3533_led_attribute_group);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to create sysfs attributes\n");
+ goto err_unregister;
+ }
+
+ ret = lm3533_led_setup(led, pdata);
+ if (ret)
+ goto err_sysfs_remove;
+
+ ret = lm3533_ctrlbank_enable(&led->cb);
+ if (ret)
+ goto err_sysfs_remove;
+
+ return 0;
+
+err_sysfs_remove:
+ sysfs_remove_group(&led->cdev.dev->kobj, &lm3533_led_attribute_group);
+err_unregister:
+ led_classdev_unregister(&led->cdev);
+ flush_work_sync(&led->work);
+err_free:
+ kfree(led);
+
+ return ret;
+}
+
+static int __devexit lm3533_led_remove(struct platform_device *pdev)
+{
+ struct lm3533_led *led = platform_get_drvdata(pdev);
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ lm3533_ctrlbank_disable(&led->cb);
+ sysfs_remove_group(&led->cdev.dev->kobj, &lm3533_led_attribute_group);
+ led_classdev_unregister(&led->cdev);
+ flush_work_sync(&led->work);
+ kfree(led);
+
+ return 0;
+}
+
+static void lm3533_led_shutdown(struct platform_device *pdev)
+{
+
+ struct lm3533_led *led = platform_get_drvdata(pdev);
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ lm3533_ctrlbank_disable(&led->cb);
+ lm3533_led_set(&led->cdev, LED_OFF); /* disable blink */
+ flush_work_sync(&led->work);
+}
+
+static struct platform_driver lm3533_led_driver = {
+ .driver = {
+ .name = "lm3533-leds",
+ .owner = THIS_MODULE,
+ },
+ .probe = lm3533_led_probe,
+ .remove = __devexit_p(lm3533_led_remove),
+ .shutdown = lm3533_led_shutdown,
+};
+module_platform_driver(lm3533_led_driver);
+
+MODULE_AUTHOR("Johan Hovold <jhovold@xxxxxxxxx>");
+MODULE_DESCRIPTION("LM3533 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lm3533-leds");
_
Subject: Subject: leds: add LM3533 LED driver
Patches currently in -mm which might be from jhovold@xxxxxxxxx are
linux-next.patch
backlight-add-lm3533-backlight-driver.patch
backlight-add-lm3533-backlight-driver-fix.patch
backlight-add-lm3533-backlight-driver-fix-fix.patch
backlight-add-lm3533-backlight-driver-v4.patch
leds-add-lm3533-led-driver.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
