The patch titled Subject: x86: print e820 physical addresses consistently with other parts of kernel has been added to the -mm tree. Its filename is x86-print-e820-physical-addresses-consistently-with-other-parts-of-kernel.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Subject: x86: print e820 physical addresses consistently with other parts of kernel Print physical address info in a style consistent with the %pR style used elsewhere in the kernel. For example: -BIOS-provided physical RAM map: +e820: BIOS-provided physical RAM map: - BIOS-e820: 0000000000000100 - 000000000009e000 (usable) +BIOS-e820: [mem 0x0000000000000100-0x000000000009dfff] usable -Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000) +e820: [mem 0x90000000-0xfed1bfff] available for PCI devices -reserve RAM buffer: 000000000009e000 - 000000000009ffff +e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Cc: Yinghai Lu <yinghai@xxxxxxxxxx> Cc: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> Cc: Ingo Molnar <mingo@xxxxxxx> Cc: "H. Peter Anvin" <hpa@xxxxxxxxx> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- arch/x86/kernel/e820.c | 53 +++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff -puN arch/x86/kernel/e820.c~x86-print-e820-physical-addresses-consistently-with-other-parts-of-kernel arch/x86/kernel/e820.c --- a/arch/x86/kernel/e820.c~x86-print-e820-physical-addresses-consistently-with-other-parts-of-kernel +++ a/arch/x86/kernel/e820.c @@ -113,7 +113,9 @@ static void __init __e820_add_region(str int x = e820x->nr_map; if (x >= ARRAY_SIZE(e820x->map)) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + printk(KERN_ERR "e820: too many entries; ignoring [mem %#010llx-%#010llx]\n", + (unsigned long long) start, + (unsigned long long) (start + size - 1)); return; } @@ -133,20 +135,20 @@ static void __init e820_print_type(u32 t switch (type) { case E820_RAM: case E820_RESERVED_KERN: - printk(KERN_CONT "(usable)"); + printk(KERN_CONT "usable"); break; case E820_RESERVED: case E820_RESERVED_EFI: - printk(KERN_CONT "(reserved)"); + printk(KERN_CONT "reserved"); break; case E820_ACPI: - printk(KERN_CONT "(ACPI data)"); + printk(KERN_CONT "ACPI data"); break; case E820_NVS: - printk(KERN_CONT "(ACPI NVS)"); + printk(KERN_CONT "ACPI NVS"); break; case E820_UNUSABLE: - printk(KERN_CONT "(unusable)"); + printk(KERN_CONT "unusable"); break; default: printk(KERN_CONT "type %u", type); @@ -159,10 +161,10 @@ void __init e820_print_map(char *who) int i; for (i = 0; i < e820.nr_map; i++) { - printk(KERN_INFO " %s: %016Lx - %016Lx ", who, + printk(KERN_INFO "%s: [mem %#018Lx-%#018Lx] ", who, (unsigned long long) e820.map[i].addr, (unsigned long long) - (e820.map[i].addr + e820.map[i].size)); + (e820.map[i].addr + e820.map[i].size - 1)); e820_print_type(e820.map[i].type); printk(KERN_CONT "\n"); } @@ -429,9 +431,8 @@ static u64 __init __e820_update_range(st size = ULLONG_MAX - start; end = start + size; - printk(KERN_DEBUG "e820 update range: %016Lx - %016Lx ", - (unsigned long long) start, - (unsigned long long) end); + printk(KERN_DEBUG "e820: update [mem %#010Lx-%#010Lx] ", + (unsigned long long) start, (unsigned long long) (end - 1)); e820_print_type(old_type); printk(KERN_CONT " ==> "); e820_print_type(new_type); @@ -510,9 +511,8 @@ u64 __init e820_remove_range(u64 start, size = ULLONG_MAX - start; end = start + size; - printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ", - (unsigned long long) start, - (unsigned long long) end); + printk(KERN_DEBUG "e820: remove [mem %#010Lx-%#010Lx] ", + (unsigned long long) start, (unsigned long long) (end - 1)); if (checktype) e820_print_type(old_type); printk(KERN_CONT "\n"); @@ -568,7 +568,7 @@ void __init update_e820(void) if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) return; e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); + printk(KERN_INFO "e820: modified physical RAM map:\n"); e820_print_map("modified"); } static void __init update_e820_saved(void) @@ -638,8 +638,8 @@ __init void e820_setup_gap(void) if (!found) { gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024; printk(KERN_ERR - "PCI: Warning: Cannot find a gap in the 32bit address range\n" - "PCI: Unassigned devices with 32bit resource registers may break!\n"); + "e820: cannot find a gap in the 32bit address range\n" + "e820: PCI devices with unassigned 32bit BARs may break!\n"); } #endif @@ -649,8 +649,8 @@ __init void e820_setup_gap(void) pci_mem_start = gapstart; printk(KERN_INFO - "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", - pci_mem_start, gapstart, gapsize); + "e820: [mem %#010lx-%#010lx] available for PCI devices\n", + gapstart, gapstart + gapsize - 1); } /** @@ -668,7 +668,7 @@ void __init parse_e820_ext(struct setup_ extmap = (struct e820entry *)(sdata->data); __append_e820_map(extmap, entries); sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); - printk(KERN_INFO "extended physical RAM map:\n"); + printk(KERN_INFO "e820: extended physical RAM map:\n"); e820_print_map("extended"); } @@ -735,7 +735,7 @@ u64 __init early_reserve_e820(u64 size, addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); if (addr) { e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED); - printk(KERN_INFO "update e820_saved for early_reserve_e820\n"); + printk(KERN_INFO "e820: update e820_saved for early_reserve_e820\n"); update_e820_saved(); } @@ -785,7 +785,7 @@ unsigned long __init e820_end_pfn(unsign if (last_pfn > max_arch_pfn) last_pfn = max_arch_pfn; - printk(KERN_INFO "last_pfn = %#lx max_arch_pfn = %#lx\n", + printk(KERN_INFO "e820: last_pfn = %#lx max_arch_pfn = %#lx\n", last_pfn, max_arch_pfn); return last_pfn; } @@ -889,7 +889,7 @@ void __init finish_e820_parsing(void) early_panic("Invalid user supplied memory map"); e820.nr_map = nr; - printk(KERN_INFO "user-defined physical RAM map:\n"); + printk(KERN_INFO "e820: user-defined physical RAM map:\n"); e820_print_map("user"); } } @@ -997,8 +997,9 @@ void __init e820_reserve_resources_late( end = MAX_RESOURCE_SIZE; if (start >= end) continue; - printk(KERN_DEBUG "reserve RAM buffer: %016llx - %016llx ", - start, end); + printk(KERN_DEBUG + "e820: reserve RAM buffer [mem %#010llx-%#010llx]\n", + start, end); reserve_region_with_split(&iomem_resource, start, end, "RAM buffer"); } @@ -1048,7 +1049,7 @@ void __init setup_memory_map(void) who = x86_init.resources.memory_setup(); memcpy(&e820_saved, &e820, sizeof(struct e820map)); - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + printk(KERN_INFO "e820: BIOS-provided physical RAM map:\n"); e820_print_map(who); } _ Subject: Subject: x86: print e820 physical addresses consistently with other parts of kernel Patches currently in -mm which might be from bhelgaas@xxxxxxxxxx are linux-next.patch x86-print-e820-physical-addresses-consistently-with-other-parts-of-kernel.patch x86-print-physical-addresses-consistently-with-other-parts-of-kernel.patch swiotlb-print-physical-addresses-consistently-with-other-parts-of-kernel.patch mm-print-physical-addresses-consistently-with-other-parts-of-kernel.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html