The patch titled Subject: thermal: add support for thermal sensor present on SPEAr13xx machines has been added to the -mm tree. Its filename is thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Vincenzo Frascino <vincenzo.frascino@xxxxxx> Subject: thermal: add support for thermal sensor present on SPEAr13xx machines ST's SPEAr13xx machines are based on CortexA9 ARM processors. These machines contain a thermal sensor for junction temperature monitoring. This patch adds support for this thermal sensor in existing thermal framework. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@xxxxxx> Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> Cc: Len Brown <lenb@xxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/thermal/Kconfig | 7 drivers/thermal/Makefile | 1 drivers/thermal/spear_thermal.c | 205 ++++++++++++++++++ include/linux/platform_data/spear_thermal.h | 26 ++ 4 files changed, 239 insertions(+) diff -puN drivers/thermal/Kconfig~thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines drivers/thermal/Kconfig --- a/drivers/thermal/Kconfig~thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines +++ a/drivers/thermal/Kconfig @@ -18,3 +18,10 @@ config THERMAL_HWMON depends on THERMAL depends on HWMON=y || HWMON=THERMAL default y + +config SPEAR_THERMAL + bool "SPEAr thermal sensor driver" + depends on THERMAL + help + Enable this to plug the SPEAr thermal sensor driver into the Linux + thermal framework diff -puN drivers/thermal/Makefile~thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines drivers/thermal/Makefile --- a/drivers/thermal/Makefile~thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines +++ a/drivers/thermal/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o \ No newline at end of file diff -puN /dev/null drivers/thermal/spear_thermal.c --- /dev/null +++ a/drivers/thermal/spear_thermal.c @@ -0,0 +1,205 @@ +/* + * SPEAr thermal driver. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino <vincenzo.frascino@xxxxxx> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/platform_data/spear_thermal.h> +#include <linux/thermal.h> + +#define MD_FACTOR 1000 + +/* SPEAr Thermal Sensor Dev Structure */ +struct spear_thermal_dev { + /* pointer to base address of the thermal sensor */ + void __iomem *thermal_base; + /* clk structure */ + struct clk *clk; + /* pointer to thermal flags */ + unsigned int flags; +}; + +static inline int thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct spear_thermal_dev *stdev = thermal->devdata; + + /* + * Data are ready to be read after 628 usec from POWERDOWN signal + * (PDN) = 1 + */ + *temp = (readl(stdev->thermal_base) & 0x7F) * MD_FACTOR; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = thermal_get_temp, +}; + +#ifdef CONFIG_PM +static int spear_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + dev_info(dev, "Suspended.\n"); + + return 0; +} + +static int spear_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + int ret = 0; + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + return ret; + } + + /* Enable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask | stdev->flags, stdev->thermal_base); + + dev_info(dev, "Resumed.\n"); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend, + spear_thermal_resume); + +static int spear_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *spear_thermal = NULL; + struct spear_thermal_dev *stdev; + struct spear_thermal_pdata *pdata; + int ret = 0; + struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!stres) { + dev_err(&pdev->dev, "memory resource missing\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "platform data is NULL\n"); + return -EINVAL; + } + + stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); + if (!stdev) { + dev_err(&pdev->dev, "kzalloc fail\n"); + return -ENOMEM; + } + + /* Enable thermal sensor */ + stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start, + resource_size(stres)); + if (!stdev->thermal_base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + stdev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(stdev->clk)) { + dev_err(&pdev->dev, "Can't get clock\n"); + return PTR_ERR(stdev->clk); + } + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + goto put_clk; + } + + stdev->flags = pdata->thermal_flags; + writel(stdev->flags, stdev->thermal_base); + + spear_thermal = thermal_zone_device_register("spear_thermal", 0, + stdev, &ops, 0, 0, 0, 0); + if (!spear_thermal) { + dev_err(&pdev->dev, "thermal zone device is NULL\n"); + ret = -EINVAL; + goto disable_clk; + } + + platform_set_drvdata(pdev, spear_thermal); + + dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%x.\n", + (unsigned int)stdev->thermal_base); + + return 0; + +disable_clk: + clk_disable(stdev->clk); +put_clk: + clk_put(stdev->clk); + + return ret; +} + +static int spear_thermal_exit(struct platform_device *pdev) +{ + unsigned int actual_mask = 0; + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + + thermal_zone_device_unregister(spear_thermal); + platform_set_drvdata(pdev, NULL); + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + clk_put(stdev->clk); + + return 0; +} + +static struct platform_driver spear_thermal_driver = { + .probe = spear_thermal_probe, + .remove = spear_thermal_exit, + .driver = { + .name = "spear_thermal", + .owner = THIS_MODULE, + .pm = &spear_thermal_pm_ops, + }, +}; + +module_platform_driver(spear_thermal_driver); + +MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@xxxxxx>"); +MODULE_DESCRIPTION("SPEAr thermal driver"); +MODULE_LICENSE("GPL"); diff -puN /dev/null include/linux/platform_data/spear_thermal.h --- /dev/null +++ a/include/linux/platform_data/spear_thermal.h @@ -0,0 +1,26 @@ +/* + * SPEAr thermal driver platform data. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino <vincenzo.frascino@xxxxxx> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef SPEAR_THERMAL_H +#define SPEAR_THERMAL_H + +/* SPEAr Thermal Sensor Platform Data */ +struct spear_thermal_pdata { + /* flags used to enable thermal sensor */ + unsigned int thermal_flags; +}; + +#endif /* SPEAR_THERMAL_H */ _ Subject: Subject: thermal: add support for thermal sensor present on SPEAr13xx machines Patches currently in -mm which might be from vincenzo.frascino@xxxxxx are thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines.patch thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines-fix.patch thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines-fix-fix.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html