The patch titled
Subject: mm-tracepoint: fix documentation and examples
has been added to the -mm tree. Its filename is
mm-tracepoint-fixup-documentation-and-examples.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
From: Konstantin Khlebnikov <khlebnikov@xxxxxxxxxx>
Subject: mm-tracepoint: fix documentation and examples
We renamed the page-free mm tracepoints.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@xxxxxxxxxx>
Cc: Mel Gorman <mel@xxxxxxxxx>
Cc: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxxxxxxx>
Reviewed-by: Minchan Kim <minchan.kim@xxxxxxxxx>
Cc: Hugh Dickins <hughd@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/trace/tracepoint-analysis.txt | 40 +++++++++---------
tools/perf/Documentation/examples.txt | 34 +++++++--------
2 files changed, 37 insertions(+), 37 deletions(-)
diff -puN Documentation/trace/tracepoint-analysis.txt~mm-tracepoint-fixup-documentation-and-examples Documentation/trace/tracepoint-analysis.txt
--- a/Documentation/trace/tracepoint-analysis.txt~mm-tracepoint-fixup-documentation-and-examples
+++ a/Documentation/trace/tracepoint-analysis.txt
@@ -93,14 +93,14 @@ By specifying the -a switch and analysin
for a duration of time can be examined.
$ perf stat -a \
- -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
- -e kmem:mm_pagevec_free \
+ -e kmem:mm_page_alloc -e kmem:mm_page_free \
+ -e kmem:mm_page_free_batched \
sleep 10
Performance counter stats for 'sleep 10':
9630 kmem:mm_page_alloc
- 2143 kmem:mm_page_free_direct
- 7424 kmem:mm_pagevec_free
+ 2143 kmem:mm_page_free
+ 7424 kmem:mm_page_free_batched
10.002577764 seconds time elapsed
@@ -119,15 +119,15 @@ basis using set_ftrace_pid.
Events can be activated and tracked for the duration of a process on a local
basis using PCL such as follows.
- $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
- -e kmem:mm_pagevec_free ./hackbench 10
+ $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free \
+ -e kmem:mm_page_free_batched ./hackbench 10
Time: 0.909
Performance counter stats for './hackbench 10':
17803 kmem:mm_page_alloc
- 12398 kmem:mm_page_free_direct
- 4827 kmem:mm_pagevec_free
+ 12398 kmem:mm_page_free
+ 4827 kmem:mm_page_free_batched
0.973913387 seconds time elapsed
@@ -146,8 +146,8 @@ to know what the standard deviation is.
performance analyst to do it by hand. In the event that the discrete event
occurrences are useful to the performance analyst, then perf can be used.
- $ perf stat --repeat 5 -e kmem:mm_page_alloc -e kmem:mm_page_free_direct
- -e kmem:mm_pagevec_free ./hackbench 10
+ $ perf stat --repeat 5 -e kmem:mm_page_alloc -e kmem:mm_page_free
+ -e kmem:mm_page_free_batched ./hackbench 10
Time: 0.890
Time: 0.895
Time: 0.915
@@ -157,8 +157,8 @@ occurrences are useful to the performanc
Performance counter stats for './hackbench 10' (5 runs):
16630 kmem:mm_page_alloc ( +- 3.542% )
- 11486 kmem:mm_page_free_direct ( +- 4.771% )
- 4730 kmem:mm_pagevec_free ( +- 2.325% )
+ 11486 kmem:mm_page_free ( +- 4.771% )
+ 4730 kmem:mm_page_free_batched ( +- 2.325% )
0.982653002 seconds time elapsed ( +- 1.448% )
@@ -168,15 +168,15 @@ aggregation of discrete events, then a s
Using --repeat, it is also possible to view how events are fluctuating over
time on a system-wide basis using -a and sleep.
- $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
- -e kmem:mm_pagevec_free \
+ $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free \
+ -e kmem:mm_page_free_batched \
-a --repeat 10 \
sleep 1
Performance counter stats for 'sleep 1' (10 runs):
1066 kmem:mm_page_alloc ( +- 26.148% )
- 182 kmem:mm_page_free_direct ( +- 5.464% )
- 890 kmem:mm_pagevec_free ( +- 30.079% )
+ 182 kmem:mm_page_free ( +- 5.464% )
+ 890 kmem:mm_page_free_batched ( +- 30.079% )
1.002251757 seconds time elapsed ( +- 0.005% )
@@ -220,8 +220,8 @@ were generating events within the kernel
data must be recorded. At the time of writing, this required root:
$ perf record -c 1 \
- -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
- -e kmem:mm_pagevec_free \
+ -e kmem:mm_page_alloc -e kmem:mm_page_free \
+ -e kmem:mm_page_free_batched \
./hackbench 10
Time: 0.894
[ perf record: Captured and wrote 0.733 MB perf.data (~32010 samples) ]
@@ -260,8 +260,8 @@ noticed that X was generating an insane
at it:
$ perf record -c 1 -f \
- -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
- -e kmem:mm_pagevec_free \
+ -e kmem:mm_page_alloc -e kmem:mm_page_free \
+ -e kmem:mm_page_free_batched \
-p `pidof X`
This was interrupted after a few seconds and
diff -puN tools/perf/Documentation/examples.txt~mm-tracepoint-fixup-documentation-and-examples tools/perf/Documentation/examples.txt
--- a/tools/perf/Documentation/examples.txt~mm-tracepoint-fixup-documentation-and-examples
+++ a/tools/perf/Documentation/examples.txt
@@ -17,8 +17,8 @@ titan:~> perf list
kmem:kmem_cache_alloc_node [Tracepoint event]
kmem:kfree [Tracepoint event]
kmem:kmem_cache_free [Tracepoint event]
- kmem:mm_page_free_direct [Tracepoint event]
- kmem:mm_pagevec_free [Tracepoint event]
+ kmem:mm_page_free [Tracepoint event]
+ kmem:mm_page_free_batched [Tracepoint event]
kmem:mm_page_alloc [Tracepoint event]
kmem:mm_page_alloc_zone_locked [Tracepoint event]
kmem:mm_page_pcpu_drain [Tracepoint event]
@@ -29,15 +29,15 @@ measured. For example the page alloc/fre
run' are:
titan:~> perf stat -e kmem:mm_page_pcpu_drain -e kmem:mm_page_alloc
- -e kmem:mm_pagevec_free -e kmem:mm_page_free_direct ./hackbench 10
+ -e kmem:mm_page_free_batched -e kmem:mm_page_free ./hackbench 10
Time: 0.575
Performance counter stats for './hackbench 10':
13857 kmem:mm_page_pcpu_drain
27576 kmem:mm_page_alloc
- 6025 kmem:mm_pagevec_free
- 20934 kmem:mm_page_free_direct
+ 6025 kmem:mm_page_free_batched
+ 20934 kmem:mm_page_free
0.613972165 seconds time elapsed
@@ -45,8 +45,8 @@ You can observe the statistical properti
'repeat the workload N times' feature of perf stat:
titan:~> perf stat --repeat 5 -e kmem:mm_page_pcpu_drain -e
- kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
- kmem:mm_page_free_direct ./hackbench 10
+ kmem:mm_page_alloc -e kmem:mm_page_free_batched -e
+ kmem:mm_page_free ./hackbench 10
Time: 0.627
Time: 0.644
Time: 0.564
@@ -57,8 +57,8 @@ You can observe the statistical properti
12920 kmem:mm_page_pcpu_drain ( +- 3.359% )
25035 kmem:mm_page_alloc ( +- 3.783% )
- 6104 kmem:mm_pagevec_free ( +- 0.934% )
- 18376 kmem:mm_page_free_direct ( +- 4.941% )
+ 6104 kmem:mm_page_free_batched ( +- 0.934% )
+ 18376 kmem:mm_page_free ( +- 4.941% )
0.643954516 seconds time elapsed ( +- 2.363% )
@@ -158,15 +158,15 @@ Or you can observe the whole system's pa
seconds:
titan:~/git> perf stat -a -e kmem:mm_page_pcpu_drain -e
-kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
-kmem:mm_page_free_direct sleep 10
+kmem:mm_page_alloc -e kmem:mm_page_free_batched -e
+kmem:mm_page_free sleep 10
Performance counter stats for 'sleep 10':
171585 kmem:mm_page_pcpu_drain
322114 kmem:mm_page_alloc
- 73623 kmem:mm_pagevec_free
- 254115 kmem:mm_page_free_direct
+ 73623 kmem:mm_page_free_batched
+ 254115 kmem:mm_page_free
10.000591410 seconds time elapsed
@@ -174,15 +174,15 @@ Or observe how fluctuating the page allo
analysis done over ten 1-second intervals:
titan:~/git> perf stat --repeat 10 -a -e kmem:mm_page_pcpu_drain -e
- kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
- kmem:mm_page_free_direct sleep 1
+ kmem:mm_page_alloc -e kmem:mm_page_free_batched -e
+ kmem:mm_page_free sleep 1
Performance counter stats for 'sleep 1' (10 runs):
17254 kmem:mm_page_pcpu_drain ( +- 3.709% )
34394 kmem:mm_page_alloc ( +- 4.617% )
- 7509 kmem:mm_pagevec_free ( +- 4.820% )
- 25653 kmem:mm_page_free_direct ( +- 3.672% )
+ 7509 kmem:mm_page_free_batched ( +- 4.820% )
+ 25653 kmem:mm_page_free ( +- 3.672% )
1.058135029 seconds time elapsed ( +- 3.089% )
_
Subject: Subject: mm-tracepoint: fix documentation and examples
Patches currently in -mm which might be from khlebnikov@xxxxxxxxxx are
linux-next.patch
vmscan-fix-initial-shrinker-size-handling.patch
vmscan-use-atomic-long-for-shrinker-batching.patch
vmscan-use-atomic-long-for-shrinker-batching-fix.patch
vmscan-promote-shared-file-mapped-pages.patch
vmscan-activate-executable-pages-after-first-usage.patch
mm-add-free_hot_cold_page_list-helper.patch
mm-add-free_hot_cold_page_list-helper-v2.patch
mm-add-free_hot_cold_page_list-helper-v3.patch
mm-remove-unused-pagevec_free.patch
mm-tracepoint-rename-page-free-events.patch
mm-tracepoint-fixup-documentation-and-examples.patch
mm-fix-page-faults-detection-in-swap-token-logic.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
