[merged] rapidio-use-component-tag-for-unified-switch-identification.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     rapidio: use Component Tag for unified switch identification
has been removed from the -mm tree.  Its filename was
     rapidio-use-component-tag-for-unified-switch-identification.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: rapidio: use Component Tag for unified switch identification
From: Alexandre Bounine <alexandre.bounine@xxxxxxx>

Change the way how switchid value is set.  Local counter variable does not
provide unified way to identify switch devices in a system with multiple
processors.  Using local counter leads to the situation when the same RIO
switch has different switch ID for each processor.  Replacing local
counter with unique portion of the Component Tag provides unified
reference to the switch by every processor in the system.

Signed-off-by: Alexandre Bounine <alexandre.bounine@xxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
Cc: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
Cc: Li Yang <leoli@xxxxxxxxxxxxx>
Cc: Thomas Moll <thomas.moll@xxxxxxxxx>
Cc: Micha Nelissen <micha@xxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/rapidio/rio-scan.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff -puN drivers/rapidio/rio-scan.c~rapidio-use-component-tag-for-unified-switch-identification drivers/rapidio/rio-scan.c
--- a/drivers/rapidio/rio-scan.c~rapidio-use-component-tag-for-unified-switch-identification
+++ a/drivers/rapidio/rio-scan.c
@@ -46,7 +46,6 @@ static void rio_init_em(struct rio_dev *
 DEFINE_SPINLOCK(rio_global_list_lock);
 
 static int next_destid = 0;
-static int next_switchid = 0;
 static int next_net = 0;
 static int next_comptag = 1;
 
@@ -438,6 +437,10 @@ static struct rio_dev __devinit *rio_set
 		rio_mport_write_config_32(port, destid, hopcount,
 					  RIO_COMPONENT_TAG_CSR, next_comptag);
 		rdev->comp_tag = next_comptag++;
+	}  else {
+		rio_mport_read_config_32(port, destid, hopcount,
+					 RIO_COMPONENT_TAG_CSR,
+					 &rdev->comp_tag);
 	}
 
 	if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) {
@@ -461,7 +464,7 @@ static struct rio_dev __devinit *rio_set
 	/* If a PE has both switch and other functions, show it as a switch */
 	if (rio_is_switch(rdev)) {
 		rswitch = rdev->rswitch;
-		rswitch->switchid = next_switchid;
+		rswitch->switchid = rdev->comp_tag & RIO_CTAG_UDEVID;
 		rswitch->port_ok = 0;
 		rswitch->route_table = kzalloc(sizeof(u8)*
 					RIO_MAX_ROUTE_ENTRIES(port->sys_size),
@@ -816,7 +819,6 @@ static int __devinit rio_enum_peer(struc
 		return -1;
 
 	if (rio_is_switch(rdev)) {
-		next_switchid++;
 		sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
 		rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
 				    port->host_deviceid, sw_inport, 0);
@@ -964,8 +966,6 @@ rio_disc_peer(struct rio_net *net, struc
 		return -1;
 
 	if (rio_is_switch(rdev)) {
-		next_switchid++;
-
 		/* Associated destid is how we accessed this switch */
 		rdev->destid = destid;
 
_

Patches currently in -mm which might be from alexandre.bounine@xxxxxxx are

origin.patch
linux-next.patch
rapidio-add-new-sysfs-attributes.patch

--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux