The patch titled
memstick: set PMOS values propery for JMicron 38x controllers
has been added to the -mm tree. Its filename is
memstick-set-pmos-values-propery-for-jmicron-38x-controllers.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: memstick: set PMOS values propery for JMicron 38x controllers
From: Takashi Iwai <tiwai@xxxxxxx>
Add a function jmb38x_ms_pmos() to enable / disable PMOS setups for
JMicron 38x controllers.
Signed-off-by: Aries Lee <arieslee@xxxxxxxxxxx>
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Cc: Alex Dubov <oakad@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/memstick/host/jmb38x_ms.c | 37 ++++++++++++++++++++++++----
1 file changed, 33 insertions(+), 4 deletions(-)
diff -puN drivers/memstick/host/jmb38x_ms.c~memstick-set-pmos-values-propery-for-jmicron-38x-controllers drivers/memstick/host/jmb38x_ms.c
--- a/drivers/memstick/host/jmb38x_ms.c~memstick-set-pmos-values-propery-for-jmicron-38x-controllers
+++ a/drivers/memstick/host/jmb38x_ms.c
@@ -758,6 +758,35 @@ static int jmb38x_ms_set_param(struct me
return 0;
}
+#define PCI_PMOS0_CONTROL 0xae
+#define PMOS0_ENABLE 0x01
+#define PMOS0_OVERCURRENT_LEVEL_2_4V 0x06
+#define PMOS0_EN_OVERCURRENT_DEBOUNCE 0x40
+#define PMOS0_SW_LED_POLARITY_ENABLE 0x80
+#define PMOS0_ACTIVE_BITS (PMOS0_ENABLE | PMOS0_EN_OVERCURRENT_DEBOUNCE | \
+ PMOS0_OVERCURRENT_LEVEL_2_4V)
+#define PCI_CLOCK_CTL 0xb9
+
+static int jmb38x_ms_pmos(struct pci_dev *pdev, int flag)
+{
+ unsigned char val;
+
+ pci_read_config_byte(pdev, PCI_PMOS0_CONTROL, &val);
+ if (flag)
+ val |= PMOS0_ACTIVE_BITS;
+ else
+ val &= ~PMOS0_ACTIVE_BITS;
+ pci_write_config_byte(pdev, PCI_PMOS0_CONTROL, val);
+ dev_dbg(&pdev->dev, "JMB38x: set PMOS0 val 0x%x\n", val);
+
+ pci_read_config_byte(pdev, PCI_CLOCK_CTL, &val);
+ pci_write_config_byte(pdev, PCI_CLOCK_CTL, val & ~0x0f);
+ pci_write_config_byte(pdev, PCI_CLOCK_CTL, val | 0x01);
+ dev_dbg(&pdev->dev, "Clock Control by PCI config is disabled!\n");
+
+ return 0;
+}
+
#ifdef CONFIG_PM
static int jmb38x_ms_suspend(struct pci_dev *dev, pm_message_t state)
@@ -790,8 +819,7 @@ static int jmb38x_ms_resume(struct pci_d
return rc;
pci_set_master(dev);
- pci_read_config_dword(dev, 0xac, &rc);
- pci_write_config_dword(dev, 0xac, rc | 0x00470000);
+ jmb38x_ms_pmos(dev, 1);
for (rc = 0; rc < jm->host_cnt; ++rc) {
if (!jm->hosts[rc])
@@ -900,8 +928,7 @@ static int jmb38x_ms_probe(struct pci_de
goto err_out;
}
- pci_read_config_dword(pdev, 0xac, &rc);
- pci_write_config_dword(pdev, 0xac, rc | 0x00470000);
+ jmb38x_ms_pmos(pdev, 1);
cnt = jmb38x_ms_count_slots(pdev);
if (!cnt) {
@@ -982,6 +1009,8 @@ static void jmb38x_ms_remove(struct pci_
jmb38x_ms_free_host(jm->hosts[cnt]);
}
+ jmb38x_ms_pmos(dev, 0);
+
pci_set_drvdata(dev, NULL);
pci_release_regions(dev);
pci_disable_device(dev);
_
Patches currently in -mm which might be from tiwai@xxxxxxx are
linux-next.patch
memstick-fix-setup-for-jmicron-38x-controllers.patch
memstick-set-pmos-values-propery-for-jmicron-38x-controllers.patch
memstick-add-support-for-jmicron-jmb-385-and-390-controllers.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
