The patch titled
lis3: add support for new LIS3DC / HP3DC chip
has been added to the -mm tree. Its filename is
lis3-add-support-for-new-lis3dc-hp3dc-chip.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: lis3: add support for new LIS3DC / HP3DC chip
From: Takashi Iwai <tiwai@xxxxxxx>
A new version of LIS3 chip has slight incompatibilities from former
versions. This patch adds the minimal support for it.
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Acked-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
Cc: Eric Piel <Eric.Piel@xxxxxxxxxxxxxxxx>
Cc: Jean Delvare <khali@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/hwmon/lis3lv02d.c | 42 ++++++++++++++++++++++++++----------
drivers/hwmon/lis3lv02d.h | 17 ++++++++++++++
2 files changed, 48 insertions(+), 11 deletions(-)
diff -puN drivers/hwmon/lis3lv02d.c~lis3-add-support-for-new-lis3dc-hp3dc-chip drivers/hwmon/lis3lv02d.c
--- a/drivers/hwmon/lis3lv02d.c~lis3-add-support-for-new-lis3dc-hp3dc-chip
+++ a/drivers/hwmon/lis3lv02d.c
@@ -162,6 +162,7 @@ static void lis3lv02d_get_xyz(struct lis
/* conversion btw sampling rate and the register values */
static int lis3_12_rates[4] = {40, 160, 640, 2560};
static int lis3_8_rates[2] = {100, 400};
+static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
/* ODR is Output Data Rate */
static int lis3lv02d_get_odr(void)
@@ -180,6 +181,9 @@ static int lis3lv02d_set_odr(int rate)
u8 ctrl;
int i, len, shift;
+ if (!rate)
+ return -EINVAL;
+
lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
ctrl &= ~lis3_dev.odr_mask;
len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */
@@ -196,19 +200,25 @@ static int lis3lv02d_set_odr(int rate)
static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
{
- u8 reg;
+ u8 ctlreg, reg;
s16 x, y, z;
u8 selftest;
int ret;
mutex_lock(&lis3->mutex);
- if (lis3_dev.whoami == WAI_12B)
- selftest = CTRL1_ST;
- else
- selftest = CTRL1_STP;
+ if (lis3_dev.whoami == WAI_3DC) {
+ ctlreg = CTRL_REG4;
+ selftest = CTRL4_ST0;
+ } else {
+ ctlreg = CTRL_REG1;
+ if (lis3_dev.whoami == WAI_12B)
+ selftest = CTRL1_ST;
+ else
+ selftest = CTRL1_STP;
+ }
- lis3->read(lis3, CTRL_REG1, ®);
- lis3->write(lis3, CTRL_REG1, (reg | selftest));
+ lis3->read(lis3, ctlreg, ®);
+ lis3->write(lis3, ctlreg, (reg | selftest));
msleep(lis3->pwron_delay / lis3lv02d_get_odr());
/* Read directly to avoid axis remap */
@@ -217,7 +227,7 @@ static int lis3lv02d_selftest(struct lis
z = lis3->read_data(lis3, OUTZ);
/* back to normal settings */
- lis3->write(lis3, CTRL_REG1, reg);
+ lis3->write(lis3, ctlreg, reg);
msleep(lis3->pwron_delay / lis3lv02d_get_odr());
results[0] = x - lis3->read_data(lis3, OUTX);
@@ -301,8 +311,9 @@ static irqreturn_t lis302dl_interrupt(in
wake_up_interruptible(&lis3_dev.misc_wait);
kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
out:
- if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
- lis3_dev.idev->input->users)
+ if (lis3_dev.pdata &&
+ (lis3_dev.whoami == WAI_8B || lis3_dev.whoami == WAI_3DC) &&
+ lis3_dev.idev && lis3_dev.idev->input->users)
return IRQ_WAKE_THREAD;
return IRQ_HANDLED;
}
@@ -698,6 +709,15 @@ int lis3lv02d_init_device(struct lis3lv0
dev->odr_mask = CTRL1_DR;
dev->scale = LIS3_SENSITIVITY_8B;
break;
+ case WAI_3DC:
+ printk(KERN_INFO DRIVER_NAME ": 8 bits 3DC sensor found\n");
+ dev->read_data = lis3lv02d_read_8;
+ dev->mdps_max_val = 128;
+ dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+ dev->odrs = lis3_3dc_rates;
+ dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
+ dev->scale = LIS3_SENSITIVITY_8B;
+ break;
default:
printk(KERN_ERR DRIVER_NAME
": unknown sensor type 0x%X\n", dev->whoami);
@@ -742,7 +762,7 @@ int lis3lv02d_init_device(struct lis3lv0
* io-apic is not configurable (and generates a warning) but I keep it
* in case of support for other hardware.
*/
- if (dev->pdata && dev->whoami == WAI_8B)
+ if (dev->pdata && (dev->whoami == WAI_8B || dev->whoami == WAI_3DC))
thread_fn = lis302dl_interrupt_thread1_8b;
else
thread_fn = NULL;
diff -puN drivers/hwmon/lis3lv02d.h~lis3-add-support-for-new-lis3dc-hp3dc-chip drivers/hwmon/lis3lv02d.h
--- a/drivers/hwmon/lis3lv02d.h~lis3-add-support-for-new-lis3dc-hp3dc-chip
+++ a/drivers/hwmon/lis3lv02d.h
@@ -45,6 +45,7 @@ enum lis3_reg {
CTRL_REG1 = 0x20,
CTRL_REG2 = 0x21,
CTRL_REG3 = 0x22,
+ CTRL_REG4 = 0x23,
HP_FILTER_RESET = 0x23,
STATUS_REG = 0x27,
OUTX_L = 0x28,
@@ -93,6 +94,7 @@ enum lis3lv02d_reg {
};
enum lis3_who_am_i {
+ WAI_3DC = 0x33, /* 8 bits: LIS3DC, HP3DC */
WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */
@@ -118,6 +120,13 @@ enum lis3lv02d_ctrl1_8b {
CTRL1_DR = 0x80,
};
+enum lis3lv02d_ctrl1_3dc {
+ CTRL1_ODR0 = 0x10,
+ CTRL1_ODR1 = 0x20,
+ CTRL1_ODR2 = 0x40,
+ CTRL1_ODR3 = 0x80,
+};
+
enum lis3lv02d_ctrl2 {
CTRL2_DAS = 0x01,
CTRL2_SIM = 0x02,
@@ -129,6 +138,14 @@ enum lis3lv02d_ctrl2 {
CTRL2_FS = 0x80, /* Full Scale selection */
};
+enum lis3lv02d_ctrl4_3dc {
+ CTRL4_SIM = 0x01,
+ CTRL4_ST0 = 0x02,
+ CTRL4_ST1 = 0x04,
+ CTRL4_FS0 = 0x10,
+ CTRL4_FS1 = 0x20,
+};
+
enum lis302d_ctrl2 {
HP_FF_WU2 = 0x08,
HP_FF_WU1 = 0x04,
_
Patches currently in -mm which might be from tiwai@xxxxxxx are
linux-next.patch
lis3-fix-oops-with-null-platform-data.patch
lis3-add-axes-module-parameter-for-custom-axis-mapping.patch
lis3-add-support-for-new-lis3dc-hp3dc-chip.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
