The patch titled viafb: add documentation for proc interface has been added to the -mm tree. Its filename is viafb-add-documentation-for-proc-interface.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: viafb: add documentation for proc interface From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx> Add documentation for the new proc interface that allows modification of the output device configuration. Should be stable and useful enough now for daily use. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx> Cc: Joseph Chan <JosephChan@xxxxxxxxxx> Cc: Jonathan Corbet <corbet@xxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- Documentation/fb/viafb.txt | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff -puN Documentation/fb/viafb.txt~viafb-add-documentation-for-proc-interface Documentation/fb/viafb.txt --- a/Documentation/fb/viafb.txt~viafb-add-documentation-for-proc-interface +++ a/Documentation/fb/viafb.txt @@ -197,6 +197,54 @@ Notes: example, # fbset -depth 16 + +[Configure viafb via /proc] +--------------------------- + The following files exist in /proc/viafb + + supported_output_devices + + This read-only file contains a full ',' seperated list containing all + output devices that could be available on your platform. It is likely + that not all of those have a connector on your hardware but it should + provide a good starting point to figure out which of those names match + a real connector. + Example: + # cat /proc/viafb/supported_output_devices + + iga1/output_devices + iga2/output_devices + + These two files are readable and writable. iga1 and iga2 are the two + independent units that produce the screen image. Those images can be + forwarded to one or more output devices. Reading those files is a way + to query which output devices are currently used by an iga. + Example: + # cat /proc/viafb/iga1/output_devices + If there are no output devices printed the output of this iga is lost. + This can happen for example if only one (the other) iga is used. + Writing to these files allows adjusting the output devices during + runtime. One can add new devices, remove existing ones or switch + between igas. Essentially you can write a ',' seperated list of device + names (or a single one) in the same format as the output to those + files. You can add a '+' or '-' as a prefix allowing simple addition + and removal of devices. So a prefix '+' adds the devices from your list + to the already existing ones, '-' removes the listed devices from the + existing ones and if no prefix is given it replaces all existing ones + with the listed ones. If you remove devices they are expected to turn + off. If you add devices that are already part of the other iga they are + removed there and added to the new one. + Examples: + Add CRT as output device to iga1 + # echo +CRT > /proc/viafb/iga1/output_devices + + Remove (turn off) DVP1 and LVDS1 as output devices of iga2 + # echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices + + Replace all iga1 output devices by CRT + # echo CRT > /proc/viafb/iga1/output_devices + + [Bootup with viafb]: -------------------- Add the following line to your grub.conf: _ Patches currently in -mm which might be from FlorianSchandinat@xxxxxx are linux-next.patch viafb-add-interface-for-output-device-configuration.patch viafb-limit-lcd-code-impact.patch viafb-introduce-per-output-device-power-management.patch viafb-vt1636-cleanup.patch viafb-fix-i2c_transfer-error-handling.patch viafb-enable-i2c-for-crt.patch viafb-reduce-i2c-timeout-and-delay.patch viafb-add-function-to-change-sync-polarity-per-device.patch viafb-set-sync-polarity-for-all-output-devices.patch viafb-add-a-mapping-of-supported-output-devices.patch viafb-rename-output-devices.patch viafb-add-documentation-for-proc-interface.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html