The patch titled
drivers/edac: convert logging messages direct uses of __FILE__ to %s, __FILE
has been added to the -mm tree. Its filename is
drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: drivers/edac: convert logging messages direct uses of __FILE__ to %s, __FILE
From: Joe Perches <joe@xxxxxxxxxxx>
Reduces text by eliminating multiple __FILE__ uses.
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
Cc: Doug Thompson <dougthompson@xxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Cc: Tim Small <tim@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/edac/i5000_edac.c | 20 ++++++++++----------
drivers/edac/i5400_edac.c | 20 ++++++++++----------
drivers/edac/i82443bxgx_edac.c | 20 ++++++++++----------
3 files changed, 30 insertions(+), 30 deletions(-)
diff -puN drivers/edac/i5000_edac.c~drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file drivers/edac/i5000_edac.c
--- a/drivers/edac/i5000_edac.c~drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file
+++ a/drivers/edac/i5000_edac.c
@@ -774,7 +774,7 @@ static void i5000_clear_error(struct mem
static void i5000_check_error(struct mem_ctl_info *mci)
{
struct i5000_error_info info;
- debugf4("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+ debugf4("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
i5000_get_error_info(mci, &info);
i5000_process_error_info(mci, &info, 1);
}
@@ -1353,8 +1353,8 @@ static int i5000_probe1(struct pci_dev *
int num_dimms_per_channel;
int num_csrows;
- debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
- __func__,
+ debugf0("MC: %s: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+ __FILE__, __func__,
pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
@@ -1389,7 +1389,7 @@ static int i5000_probe1(struct pci_dev *
return -ENOMEM;
kobject_get(&mci->edac_mci_kobj);
- debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+ debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
mci->dev = &pdev->dev; /* record ptr to the generic device */
@@ -1432,8 +1432,8 @@ static int i5000_probe1(struct pci_dev *
/* add this new MC control structure to EDAC's list of MCs */
if (edac_mc_add_mc(mci)) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf0("MC: %s: %s(): failed edac_mc_add_mc()\n",
+ __FILE__, __func__);
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
@@ -1478,7 +1478,7 @@ static int __devinit i5000_init_one(stru
{
int rc;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* wake up device */
rc = pci_enable_device(pdev);
@@ -1497,7 +1497,7 @@ static void __devexit i5000_remove_one(s
{
struct mem_ctl_info *mci;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("%s: %s()\n", __FILE__, __func__);
if (i5000_pci)
edac_pci_release_generic_ctl(i5000_pci);
@@ -1544,7 +1544,7 @@ static int __init i5000_init(void)
{
int pci_rc;
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
@@ -1560,7 +1560,7 @@ static int __init i5000_init(void)
*/
static void __exit i5000_exit(void)
{
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
pci_unregister_driver(&i5000_driver);
}
diff -puN drivers/edac/i5400_edac.c~drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file drivers/edac/i5400_edac.c
--- a/drivers/edac/i5400_edac.c~drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file
+++ a/drivers/edac/i5400_edac.c
@@ -694,7 +694,7 @@ static void i5400_clear_error(struct mem
static void i5400_check_error(struct mem_ctl_info *mci)
{
struct i5400_error_info info;
- debugf4("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+ debugf4("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
i5400_get_error_info(mci, &info);
i5400_process_error_info(mci, &info);
}
@@ -1227,8 +1227,8 @@ static int i5400_probe1(struct pci_dev *
if (dev_idx >= ARRAY_SIZE(i5400_devs))
return -EINVAL;
- debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
- __func__,
+ debugf0("MC: %s: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+ __FILE__, __func__,
pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
@@ -1256,7 +1256,7 @@ static int i5400_probe1(struct pci_dev *
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+ debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
mci->dev = &pdev->dev; /* record ptr to the generic device */
@@ -1299,8 +1299,8 @@ static int i5400_probe1(struct pci_dev *
/* add this new MC control structure to EDAC's list of MCs */
if (edac_mc_add_mc(mci)) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf0("MC: %s: %s(): failed edac_mc_add_mc()\n",
+ __FILE__, __func__);
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
@@ -1344,7 +1344,7 @@ static int __devinit i5400_init_one(stru
{
int rc;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* wake up device */
rc = pci_enable_device(pdev);
@@ -1363,7 +1363,7 @@ static void __devexit i5400_remove_one(s
{
struct mem_ctl_info *mci;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("%s: %s()\n", __FILE__, __func__);
if (i5400_pci)
edac_pci_release_generic_ctl(i5400_pci);
@@ -1409,7 +1409,7 @@ static int __init i5400_init(void)
{
int pci_rc;
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
@@ -1425,7 +1425,7 @@ static int __init i5400_init(void)
*/
static void __exit i5400_exit(void)
{
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
pci_unregister_driver(&i5400_driver);
}
diff -puN drivers/edac/i82443bxgx_edac.c~drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file drivers/edac/i82443bxgx_edac.c
--- a/drivers/edac/i82443bxgx_edac.c~drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file
+++ a/drivers/edac/i82443bxgx_edac.c
@@ -178,7 +178,7 @@ static void i82443bxgx_edacmc_check(stru
{
struct i82443bxgx_edacmc_error_info info;
- debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
i82443bxgx_edacmc_get_error_info(mci, &info);
i82443bxgx_edacmc_process_error_info(mci, &info, 1);
}
@@ -198,13 +198,13 @@ static void i82443bxgx_init_csrows(struc
for (index = 0; index < mci->nr_csrows; index++) {
csrow = &mci->csrows[index];
pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
- debugf1("MC%d: " __FILE__ ": %s() Row=%d DRB = %#0x\n",
- mci->mc_idx, __func__, index, drbar);
+ debugf1("MC%d: %s: %s() Row=%d DRB = %#0x\n",
+ mci->mc_idx, __FILE__, __func__, index, drbar);
row_high_limit = ((u32) drbar << 23);
/* find the DRAM Chip Select Base address and mask */
- debugf1("MC%d: " __FILE__ ": %s() Row=%d, "
+ debugf1("MC%d: %s: %s() Row=%d, "
"Boundry Address=%#0x, Last = %#0x \n",
- mci->mc_idx, __func__, index, row_high_limit,
+ mci->mc_idx, __FILE__, __func__, index, row_high_limit,
row_high_limit_last);
/* 440GX goes to 2GB, represented with a DRB of 0. */
@@ -237,7 +237,7 @@ static int i82443bxgx_edacmc_probe1(stru
enum mem_type mtype;
enum edac_type edac_mode;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* Something is really hosed if PCI config space reads from
* the MC aren't working.
@@ -250,7 +250,7 @@ static int i82443bxgx_edacmc_probe1(stru
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+ debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
@@ -336,7 +336,7 @@ static int i82443bxgx_edacmc_probe1(stru
__func__);
}
- debugf3("MC: " __FILE__ ": %s(): success\n", __func__);
+ debugf3("MC: %s: %s(): success\n", __FILE__, __func__);
return 0;
fail:
@@ -352,7 +352,7 @@ static int __devinit i82443bxgx_edacmc_i
{
int rc;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* don't need to call pci_device_enable() */
rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);
@@ -367,7 +367,7 @@ static void __devexit i82443bxgx_edacmc_
{
struct mem_ctl_info *mci;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("%s: %s()\n", __FILE__, __func__);
if (i82443bxgx_pci)
edac_pci_release_generic_ctl(i82443bxgx_pci);
_
Patches currently in -mm which might be from joe@xxxxxxxxxxx are
linux-next.patch
cifs-provide-user-with-a-hint-when-name-resolution-fails-fix.patch
drivers-scsi-correct-the-size-argument-to-kmalloc.patch
drivers-scsi-qla2xxx-qla_osc-fix-continuation-line-formats.patch
drivers-scsi-chc-dont-use-vprintk-as-macro.patch
vsprintfc-use-noinline_for_stack.patch
lib-hexdumpc-reduce-stack-variable-size-and-cleanups.patch
drivers-edac-convert-logging-messages-direct-uses-of-__file__-to-%s-__file.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
