The patch titled
gpio: adp5588-gpio: new driver for ADP5588 GPIO expanders
has been added to the -mm tree. Its filename is
gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: gpio: adp5588-gpio: new driver for ADP5588 GPIO expanders
From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
Cc: Jean Delvare <khali@xxxxxxxxxxxx>
Cc: David Brownell <david-b@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/gpio/Kconfig | 9 +
drivers/gpio/Makefile | 1
drivers/gpio/adp5588-gpio.c | 266 ++++++++++++++++++++++++++++++++++
include/linux/i2c/adp5588.h | 12 +
4 files changed, 288 insertions(+)
diff -puN drivers/gpio/Kconfig~gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders drivers/gpio/Kconfig
--- a/drivers/gpio/Kconfig~gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders
+++ a/drivers/gpio/Kconfig
@@ -172,6 +172,15 @@ config GPIO_ADP5520
To compile this driver as a module, choose M here: the module will
be called adp5520-gpio.
+config GPIO_ADP5588
+ tristate "ADP5588 I2C GPIO expander"
+ depends on I2C
+ help
+ This option enables support for 18 GPIOs found
+ on Analog Devices ADP5588 GPIO Expanders.
+ To compile this driver as a module, choose M here: the module will be
+ called adp5588-gpio.
+
comment "PCI GPIO expanders:"
config GPIO_CS5535
diff -puN drivers/gpio/Makefile~gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders drivers/gpio/Makefile
--- a/drivers/gpio/Makefile~gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders
+++ a/drivers/gpio/Makefile
@@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o
+obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o
obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o
obj-$(CONFIG_GPIO_MAX7301) += max7301.o
obj-$(CONFIG_GPIO_MAX732X) += max732x.o
diff -puN /dev/null drivers/gpio/adp5588-gpio.c
--- /dev/null
+++ a/drivers/gpio/adp5588-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * GPIO Chip driver for Analog Devices
+ * ADP5588 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/adp5588.h>
+
+#define DRV_NAME "adp5588-gpio"
+#define MAXGPIO 18
+#define ADP_BANK(offs) ((offs) >> 3)
+#define ADP_BIT(offs) (1u << ((offs) & 0x7))
+
+struct adp5588_gpio {
+ struct i2c_client *client;
+ struct gpio_chip gpio_chip;
+ struct mutex lock; /* protect cached dir, dat_out */
+ unsigned gpio_start;
+ uint8_t dat_out[3];
+ uint8_t dir[3];
+};
+
+static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Read Error\n");
+
+ return ret;
+}
+
+static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Write Error\n");
+
+ return ret;
+}
+
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off))
+ & ADP_BIT(off));
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ unsigned bank, bit;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+ bit = ADP_BIT(off);
+
+ mutex_lock(&dev->lock);
+ if (val)
+ dev->dat_out[bank] |= bit;
+ else
+ dev->dat_out[bank] &= ~bit;
+
+ adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+ dev->dat_out[bank]);
+ mutex_unlock(&dev->lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+ int ret;
+ unsigned bank;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+
+ mutex_lock(&dev->lock);
+ dev->dir[bank] &= ~ADP_BIT(off);
+ ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ int ret;
+ unsigned bank, bit;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+ bit = ADP_BIT(off);
+
+ mutex_lock(&dev->lock);
+ dev->dir[bank] |= bit;
+
+ if (val)
+ dev->dat_out[bank] |= bit;
+ else
+ dev->dat_out[bank] &= ~bit;
+
+ ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+ dev->dat_out[bank]);
+ ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank,
+ dev->dir[bank]);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+static int __devinit adp5588_gpio_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
+ struct adp5588_gpio *dev;
+ struct gpio_chip *gc;
+ int ret, i, revid;
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ dev->client = client;
+
+ gc = &dev->gpio_chip;
+ gc->direction_input = adp5588_gpio_direction_input;
+ gc->direction_output = adp5588_gpio_direction_output;
+ gc->get = adp5588_gpio_get_value;
+ gc->set = adp5588_gpio_set_value;
+ gc->can_sleep = 1;
+
+ gc->base = pdata->gpio_start;
+ gc->ngpio = MAXGPIO;
+ gc->label = client->name;
+ gc->owner = THIS_MODULE;
+
+ mutex_init(&dev->lock);
+
+
+ ret = adp5588_gpio_read(dev->client, DEV_ID);
+ if (ret < 0)
+ goto err;
+
+ revid = ret & ADP5588_DEVICE_ID_MASK;
+
+ for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
+ dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
+ ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
+ ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
+ (pdata->pullup_dis_mask >> (8 * i)) & 0xFF);
+
+ if (ret)
+ goto err;
+ }
+
+ ret = gpiochip_add(&dev->gpio_chip);
+ if (ret)
+ goto err;
+
+ dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n",
+ gc->base, gc->base + gc->ngpio - 1,
+ client->name, revid);
+
+ if (pdata->setup) {
+ ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
+ if (ret < 0)
+ dev_warn(&client->dev, "setup failed, %d\n", ret);
+ }
+
+ i2c_set_clientdata(client, dev);
+ return 0;
+
+err:
+ kfree(dev);
+ return ret;
+}
+
+static int __devexit adp5588_gpio_remove(struct i2c_client *client)
+{
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
+ struct adp5588_gpio *dev = i2c_get_clientdata(client);
+ int ret;
+
+ if (pdata->teardown) {
+ ret = pdata->teardown(client,
+ dev->gpio_chip.base, dev->gpio_chip.ngpio,
+ pdata->context);
+ if (ret < 0) {
+ dev_err(&client->dev, "teardown failed %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = gpiochip_remove(&dev->gpio_chip);
+ if (ret) {
+ dev_err(&client->dev, "gpiochip_remove failed %d\n", ret);
+ return ret;
+ }
+
+ kfree(dev);
+ return 0;
+}
+
+static const struct i2c_device_id adp5588_gpio_id[] = {
+ {DRV_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id);
+
+static struct i2c_driver adp5588_gpio_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = adp5588_gpio_probe,
+ .remove = __devexit_p(adp5588_gpio_remove),
+ .id_table = adp5588_gpio_id,
+};
+
+static int __init adp5588_gpio_init(void)
+{
+ return i2c_add_driver(&adp5588_gpio_driver);
+}
+
+module_init(adp5588_gpio_init);
+
+static void __exit adp5588_gpio_exit(void)
+{
+ i2c_del_driver(&adp5588_gpio_driver);
+}
+
+module_exit(adp5588_gpio_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("GPIO ADP5588 Driver");
+MODULE_LICENSE("GPL");
diff -puN include/linux/i2c/adp5588.h~gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders include/linux/i2c/adp5588.h
--- a/include/linux/i2c/adp5588.h~gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders
+++ a/include/linux/i2c/adp5588.h
@@ -89,4 +89,16 @@ struct adp5588_kpad_platform_data {
unsigned short unlock_key2; /* Unlock Key 2 */
};
+struct adp5588_gpio_platform_data {
+ unsigned gpio_start; /* GPIO Chip base # */
+ unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
+ int (*setup)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ int (*teardown)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ void *context;
+};
+
#endif
_
Patches currently in -mm which might be from michael.hennerich@xxxxxxxxxx are
linux-next.patch
gpio-adp5588-gpio-new-driver-for-adp5588-gpio-expanders.patch
fbdev-bf54x-lq043fb-bfin-t350mcqb-fb-drop-custom-mmap-handler.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
