The patch titled asus_acpi: convert to seq_file has been removed from the -mm tree. Its filename was asus_acpi-convert-to-seq_file.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: asus_acpi: convert to seq_file From: Alexey Dobriyan <adobriyan@xxxxxxxxx> Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx> Cc: Corentin Chary <corentincj@xxxxxxxxxx> Cc: Karol Kozimor <sziwan@xxxxxxxxxxxxxxxxxxxxx> Cc: Len Brown <len.brown@xxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/platform/x86/asus_acpi.c | 321 +++++++++++++++++------------ 1 file changed, 194 insertions(+), 127 deletions(-) diff -puN drivers/platform/x86/asus_acpi.c~asus_acpi-convert-to-seq_file drivers/platform/x86/asus_acpi.c --- a/drivers/platform/x86/asus_acpi.c~asus_acpi-convert-to-seq_file +++ a/drivers/platform/x86/asus_acpi.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/backlight.h> #include <acpi/acpi_drivers.h> #include <acpi/acpi_bus.h> @@ -512,26 +513,12 @@ static int read_acpi_int(acpi_handle han return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); } -/* - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ -static int -proc_read_info(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int asus_info_proc_show(struct seq_file *m, void *v) { - int len = 0; int temp; - char buf[16]; /* enough for all info */ - /* - * We use the easy way, we don't care of off and count, - * so we don't set eof to 1 - */ - len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); - len += sprintf(page + len, "Model reference : %s\n", - hotk->methods->name); + seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); + seq_printf(m, "Model reference : %s\n", hotk->methods->name); /* * The SFUN method probably allows the original driver to get the list * of features supported by a given model. For now, 0x0100 or 0x0800 @@ -539,8 +526,7 @@ proc_read_info(char *page, char **start, * The significance of others is yet to be found. */ if (read_acpi_int(hotk->handle, "SFUN", &temp)) - len += - sprintf(page + len, "SFUN value : 0x%04x\n", temp); + seq_printf(m, "SFUN value : 0x%04x\n", temp); /* * Another value for userspace: the ASYM method returns 0x02 for * battery low and 0x04 for battery critical, its readings tend to be @@ -549,30 +535,34 @@ proc_read_info(char *page, char **start, * silently ignored. */ if (read_acpi_int(hotk->handle, "ASYM", &temp)) - len += - sprintf(page + len, "ASYM value : 0x%04x\n", temp); + seq_printf(m, "ASYM value : 0x%04x\n", temp); if (asus_info) { - snprintf(buf, 16, "%d", asus_info->length); - len += sprintf(page + len, "DSDT length : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->checksum); - len += sprintf(page + len, "DSDT checksum : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->revision); - len += sprintf(page + len, "DSDT revision : %s\n", buf); - snprintf(buf, 7, "%s", asus_info->oem_id); - len += sprintf(page + len, "OEM id : %s\n", buf); - snprintf(buf, 9, "%s", asus_info->oem_table_id); - len += sprintf(page + len, "OEM table id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->oem_revision); - len += sprintf(page + len, "OEM revision : 0x%s\n", buf); - snprintf(buf, 5, "%s", asus_info->asl_compiler_id); - len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); - len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + seq_printf(m, "DSDT length : %d\n", asus_info->length); + seq_printf(m, "DSDT checksum : %d\n", asus_info->checksum); + seq_printf(m, "DSDT revision : %d\n", asus_info->revision); + seq_printf(m, "OEM id : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id); + seq_printf(m, "OEM table id : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id); + seq_printf(m, "OEM revision : 0x%x\n", asus_info->oem_revision); + seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id); + seq_printf(m, "ASL comp revision : 0x%x\n", asus_info->asl_compiler_revision); } - return len; + return 0; +} + +static int asus_info_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, asus_info_proc_show, NULL); } +static const struct file_operations asus_info_proc_fops = { + .owner = THIS_MODULE, + .open = asus_info_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /* * /proc handlers * We write our info in page, we begin at offset off and cannot write more @@ -638,34 +628,48 @@ write_led(const char __user *buffer, uns /* * Proc handlers for MLED */ -static int -proc_read_mled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int mled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->mled_status, MLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON)); + return 0; } -static int -proc_write_mled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int mled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mled_proc_show, NULL); +} + +static ssize_t mled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); } +static const struct file_operations mled_proc_fops = { + .owner = THIS_MODULE, + .open = mled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mled_proc_write, +}; + /* * Proc handlers for LED display */ -static int -proc_read_ledd(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int ledd_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "0x%08x\n", hotk->ledd_status); + seq_printf(m, "0x%08x\n", hotk->ledd_status); + return 0; } -static int -proc_write_ledd(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int ledd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ledd_proc_show, NULL); +} + +static ssize_t ledd_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -681,61 +685,104 @@ proc_write_ledd(struct file *file, const return rv; } +static const struct file_operations ledd_proc_fops = { + .owner = THIS_MODULE, + .open = ledd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = ledd_proc_write, +}; + /* * Proc handlers for WLED */ -static int -proc_read_wled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int wled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->wled_status, WLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON)); + return 0; } -static int -proc_write_wled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int wled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, wled_proc_show, NULL); +} + +static ssize_t wled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); } +static const struct file_operations wled_proc_fops = { + .owner = THIS_MODULE, + .open = wled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = wled_proc_write, +}; + /* * Proc handlers for Bluetooth */ -static int -proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int bluetooth_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); + return 0; } -static int -proc_write_bluetooth(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int bluetooth_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, bluetooth_proc_show, NULL); +} + +static ssize_t bluetooth_proc_write(struct file *file, + const char __user *buffer, size_t count, loff_t *pos) { /* Note: mt_bt_switch controls both internal Bluetooth adapter's presence and its LED */ return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0); } +static const struct file_operations bluetooth_proc_fops = { + .owner = THIS_MODULE, + .open = bluetooth_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = bluetooth_proc_write, +}; + /* * Proc handlers for TLED */ -static int -proc_read_tled(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int tled_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", - read_led(hotk->methods->tled_status, TLED_ON)); + seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON)); + return 0; } -static int -proc_write_tled(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int tled_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, tled_proc_show, NULL); +} + +static ssize_t tled_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); } +static const struct file_operations tled_proc_fops = { + .owner = THIS_MODULE, + .open = tled_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = tled_proc_write, +}; + static int get_lcd_state(void) { int lcd = 0; @@ -828,16 +875,19 @@ static int set_lcd_state(int value) } -static int -proc_read_lcd(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int lcd_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", get_lcd_state()); + seq_printf(m, "%d\n", get_lcd_state()); + return 0; } -static int -proc_write_lcd(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int lcd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, lcd_proc_show, NULL); +} + +static ssize_t lcd_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -847,6 +897,15 @@ proc_write_lcd(struct file *file, const return rv; } +static const struct file_operations lcd_proc_fops = { + .owner = THIS_MODULE, + .open = lcd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = lcd_proc_write, +}; + static int read_brightness(struct backlight_device *bd) { int value; @@ -906,16 +965,19 @@ static int set_brightness_status(struct return set_brightness(bd->props.brightness); } -static int -proc_read_brn(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int brn_proc_show(struct seq_file *m, void *v) { - return sprintf(page, "%d\n", read_brightness(NULL)); + seq_printf(m, "%d\n", read_brightness(NULL)); + return 0; } -static int -proc_write_brn(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int brn_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, brn_proc_show, NULL); +} + +static ssize_t brn_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -928,6 +990,15 @@ proc_write_brn(struct file *file, const return rv; } +static const struct file_operations brn_proc_fops = { + .owner = THIS_MODULE, + .open = brn_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = brn_proc_write, +}; + static void set_display(int value) { /* no sanity check needed for now */ @@ -941,9 +1012,7 @@ static void set_display(int value) * Now, *this* one could be more user-friendly, but so far, no-one has * complained. The significance of bits is the same as in proc_write_disp() */ -static int -proc_read_disp(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int disp_proc_show(struct seq_file *m, void *v) { int value = 0; @@ -951,7 +1020,13 @@ proc_read_disp(char *page, char **start, printk(KERN_WARNING "Asus ACPI: Error reading display status\n"); value &= 0x07; /* needed for some models, shouldn't hurt others */ - return sprintf(page, "%d\n", value); + seq_printf(m, "%d\n", value); + return 0; +} + +static int disp_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, disp_proc_show, NULL); } /* @@ -960,9 +1035,8 @@ proc_read_disp(char *page, char **start, * (bitwise) of these will suffice. I never actually tested 3 displays hooked * up simultaneously, so be warned. See the acpi4asus README for more info. */ -static int -proc_write_disp(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t disp_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { int rv, value; @@ -972,25 +1046,27 @@ proc_write_disp(struct file *file, const return rv; } -typedef int (proc_readfunc) (char *page, char **start, off_t off, int count, - int *eof, void *data); -typedef int (proc_writefunc) (struct file *file, const char __user *buffer, - unsigned long count, void *data); +static const struct file_operations disp_proc_fops = { + .owner = THIS_MODULE, + .open = disp_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = disp_proc_write, +}; static int -asus_proc_add(char *name, proc_writefunc *writefunc, - proc_readfunc *readfunc, mode_t mode, +asus_proc_add(char *name, const struct file_operations *proc_fops, mode_t mode, struct acpi_device *device) { - struct proc_dir_entry *proc = - create_proc_entry(name, mode, acpi_device_dir(device)); + struct proc_dir_entry *proc; + + proc = proc_create_data(name, mode, acpi_device_dir(device), + proc_fops, acpi_driver_data(device)); if (!proc) { printk(KERN_WARNING " Unable to create %s fs entry\n", name); return -1; } - proc->write_proc = writefunc; - proc->read_proc = readfunc; - proc->data = acpi_driver_data(device); proc->uid = asus_uid; proc->gid = asus_gid; return 0; @@ -1019,10 +1095,9 @@ static int asus_hotk_add_fs(struct acpi_ if (!acpi_device_dir(device)) return -ENODEV; - proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device)); + proc = proc_create(PROC_INFO, mode, acpi_device_dir(device), + &asus_info_proc_fops); if (proc) { - proc->read_proc = proc_read_info; - proc->data = acpi_driver_data(device); proc->uid = asus_uid; proc->gid = asus_gid; } else { @@ -1031,28 +1106,23 @@ static int asus_hotk_add_fs(struct acpi_ } if (hotk->methods->mt_wled) { - asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled, - mode, device); + asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device); } if (hotk->methods->mt_ledd) { - asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd, - mode, device); + asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device); } if (hotk->methods->mt_mled) { - asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled, - mode, device); + asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device); } if (hotk->methods->mt_tled) { - asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled, - mode, device); + asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device); } if (hotk->methods->mt_bt_switch) { - asus_proc_add(PROC_BT, &proc_write_bluetooth, - &proc_read_bluetooth, mode, device); + asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device); } /* @@ -1060,19 +1130,16 @@ static int asus_hotk_add_fs(struct acpi_ * accessible from the keyboard */ if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { - asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode, - device); + asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device); } if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || (hotk->methods->brightness_get && hotk->methods->brightness_set)) { - asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode, - device); + asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device); } if (hotk->methods->display_set) { - asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp, - mode, device); + asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device); } return 0; _ Patches currently in -mm which might be from adobriyan@xxxxxxxxx are arm-convert-proc-cpu-aligment-to-seq_file.patch proc_fops-convert-av7110.patch proc_fops-convert-drivers-isdn-to-seq_file.patch mpt-fusion-convert-to-seq_file.patch tracehooks-kill-some-pt_ptraced-checks.patch tracehooks-check-pt_ptraced-before-reporting-the-single-step.patch ptrace_signal-check-pt_ptraced-before-reporting-a-signal.patch export-__ptrace_detach-and-do_notify_parent_cldstop.patch reorder-the-code-in-kernel-ptracec.patch implement-utrace-ptrace.patch utrace-core.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html