The patch titled
8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card
has been added to the -mm tree. Its filename is
8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card
From: "Ira W. Snyder" <iws@xxxxxxxxxxxxxxxx>
This patch is heavily based on an earlier patch found on the linux-serial
mailing list [1], written by Darius Augulis.
The previous incarnation of this patch only supported a 2x serial port
card. I have added support for my SYBA 6x serial port card, and tested on
x86.
[1]: http://marc.info/?l=linux-serial&m=124975806304760
Signed-off-by: Ira W. Snyder <iws@xxxxxxxxxxxxxxxx>
Cc: Darius Augulis <augulis.darius@xxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/parport/parport_pc.c | 6 ++++++
drivers/serial/8250_pci.c | 22 +++++++++++++++++++++-
include/linux/pci_ids.h | 1 +
3 files changed, 28 insertions(+), 1 deletion(-)
diff -puN drivers/parport/parport_pc.c~8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card drivers/parport/parport_pc.c
--- a/drivers/parport/parport_pc.c~8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card
+++ a/drivers/parport/parport_pc.c
@@ -2908,6 +2908,7 @@ enum parport_pc_pci_cards {
netmos_9805,
netmos_9815,
netmos_9901,
+ netmos_9865,
quatech_sppxp100,
};
@@ -2989,6 +2990,7 @@ static struct parport_pc_pci {
/* netmos_9805 */ { 1, { { 0, -1 }, } },
/* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
/* netmos_9901 */ { 1, { { 0, -1 }, } },
+ /* netmos_9865 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
};
@@ -3092,6 +3094,10 @@ static const struct pci_device_id parpor
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
0xA000, 0x2000, 0, 0, netmos_9901 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x1000, 0, 0, netmos_9865 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x2000, 0, 0, netmos_9865 },
/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
diff -puN drivers/serial/8250_pci.c~8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card drivers/serial/8250_pci.c
--- a/drivers/serial/8250_pci.c~8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card
+++ a/drivers/serial/8250_pci.c
@@ -760,7 +760,8 @@ static int pci_netmos_init(struct pci_de
/* subdevice 0x00PS means <P> parallel, <S> serial */
unsigned int num_serial = dev->subsystem_device & 0xf;
- if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+ if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
+ (dev->device == PCI_DEVICE_ID_NETMOS_9865))
return 0;
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
@@ -1479,6 +1480,7 @@ enum pci_board_num_t {
pbn_b0_bt_1_115200,
pbn_b0_bt_2_115200,
+ pbn_b0_bt_4_115200,
pbn_b0_bt_8_115200,
pbn_b0_bt_1_460800,
@@ -1703,6 +1705,12 @@ static struct pciserial_board pci_boards
.base_baud = 115200,
.uart_offset = 8,
},
+ [pbn_b0_bt_4_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[pbn_b0_bt_8_115200] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 8,
@@ -3649,6 +3657,18 @@ static struct pci_device_id serial_pci_t
0, 0, pbn_b0_1_115200 },
/*
+ * Best Connectivity PCI Multi I/O cards
+ */
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x3004,
+ 0, 0, pbn_b0_bt_4_115200 },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
diff -puN include/linux/pci_ids.h~8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card include/linux/pci_ids.h
--- a/include/linux/pci_ids.h~8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card
+++ a/include/linux/pci_ids.h
@@ -2713,6 +2713,7 @@
#define PCI_DEVICE_ID_NETMOS_9835 0x9835
#define PCI_DEVICE_ID_NETMOS_9845 0x9845
#define PCI_DEVICE_ID_NETMOS_9855 0x9855
+#define PCI_DEVICE_ID_NETMOS_9865 0x9865
#define PCI_DEVICE_ID_NETMOS_9901 0x9901
#define PCI_VENDOR_ID_3COM_2 0xa727
_
Patches currently in -mm which might be from iws@xxxxxxxxxxxxxxxx are
linux-next.patch
8250_pci-add-support-for-mcs9865-syba-6x-serial-port-card.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
