The patch titled sdhci: add support for the SysKonnect CardBus2SDIO adapter has been removed from the -mm tree. Its filename was sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: sdhci: add support for the SysKonnect CardBus2SDIO adapter From: Nicolas Pitre <nico@xxxxxxxxxxx> This is still in use especially to develop SDIO device drivers on laptop machines which are lacking SDIO slots. This adapter supports SDIO cards only due to lack of 136-bit response capability. Signed-off-by: Nicolas Pitre <nico@xxxxxxxxxxx> Cc: <linux-mmc@xxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/sdhci-pci.c | 75 +++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff -puN drivers/mmc/host/sdhci-pci.c~sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter drivers/mmc/host/sdhci-pci.c --- a/drivers/mmc/host/sdhci-pci.c~sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter +++ a/drivers/mmc/host/sdhci-pci.c @@ -285,6 +285,73 @@ static const struct sdhci_pci_fixes sdhc .resume = jmicron_resume, }; +/* SysKonnect CardBus2SDIO extra registers */ +#define SYSKT_CTRL 0x200 +#define SYSKT_RDFIFO_STAT 0x204 +#define SYSKT_WRFIFO_STAT 0x208 +#define SYSKT_POWER_DATA 0x20c +#define SYSKT_POWER_330 0xef +#define SYSKT_POWER_300 0xf8 +#define SYSKT_POWER_184 0xcc +#define SYSKT_POWER_CMD 0x20d +#define SYSKT_POWER_START (1 << 7) +#define SYSKT_POWER_STATUS 0x20e +#define SYSKT_POWER_STATUS_OK (1 << 0) +#define SYSKT_BOARD_REV 0x210 +#define SYSKT_CHIP_REV 0x211 +#define SYSKT_CONF_DATA 0x212 +#define SYSKT_CONF_DATA_1V8 (1 << 2) +#define SYSKT_CONF_DATA_2V5 (1 << 1) +#define SYSKT_CONF_DATA_3V3 (1 << 0) + +static int syskt_probe(struct sdhci_pci_chip *chip) +{ + if ((chip->pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) { + chip->pdev->class &= ~0x0000FF; + chip->pdev->class |= PCI_SDHCI_IFDMA; + } + return 0; +} + +static int syskt_probe_slot(struct sdhci_pci_slot *slot) +{ + int tm, ps; + + u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV); + u8 chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV); + dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, " + "board rev %d.%d, chip rev %d.%d\n", + board_rev >> 4, board_rev & 0xf, + chip_rev >> 4, chip_rev & 0xf); + if (chip_rev >= 0x20) + slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA; + + writeb(SYSKT_POWER_330, slot->host->ioaddr + SYSKT_POWER_DATA); + writeb(SYSKT_POWER_START, slot->host->ioaddr + SYSKT_POWER_CMD); + udelay(50); + tm = 10; /* Wait max 1 ms */ + do { + ps = readw(slot->host->ioaddr + SYSKT_POWER_STATUS); + if (ps & SYSKT_POWER_STATUS_OK) + break; + udelay(100); + } while (--tm); + if (!tm) { + dev_err(&slot->chip->pdev->dev, + "power regulator never stabilized"); + writeb(0, slot->host->ioaddr + SYSKT_POWER_CMD); + return -ENODEV; + } + + return 0; +} + +static const struct sdhci_pci_fixes sdhci_syskt = { + .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER, + .probe = syskt_probe, + .probe_slot = syskt_probe_slot, +}; + static int via_probe(struct sdhci_pci_chip *chip) { if (chip->pdev->revision == 0x10) @@ -363,6 +430,14 @@ static const struct pci_device_id pci_id }, { + .vendor = PCI_VENDOR_ID_SYSKONNECT, + .device = 0x8000, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_syskt, + }, + + { .vendor = PCI_VENDOR_ID_VIA, .device = 0x95d0, .subvendor = PCI_ANY_ID, _ Patches currently in -mm which might be from nico@xxxxxxxxxxx are origin.patch linux-next.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html