The patch titled
serial 8250: fixes for Alchemy uarts
has been added to the -mm tree. Its filename is
serial-8250-fixes-for-alchemy-uarts.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: serial 8250: fixes for Alchemy uarts
From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
Limit the amount of address space claimed for Alchemy serial ports to
0x1000. On the Au1300, ports are only 0x1000 apart, and the registers
only extend to 0x110 at most on all supported alchemy models.
On the Au1300 the autodetect logic no longer works and this makes it
necessary to specify the port type through platform data. Because of this
the MSR quirk needs to be moved outside the autoconfig() function which
will no longer be called when UPF_FIXED_TYPE is specified.
Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
diff -puN drivers/serial/8250.c~serial-8250-fixes-for-alchemy-uarts drivers/serial/8250.c
--- a/drivers/serial/8250.c~serial-8250-fixes-for-alchemy-uarts
+++ a/drivers/serial/8250.c
@@ -1214,12 +1214,6 @@ static void autoconfig(struct uart_8250_
}
#endif
-#ifdef CONFIG_SERIAL_8250_AU1X00
- /* if access method is AU, it is a 16550 with a quirk */
- if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
-#endif
-
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
@@ -2429,7 +2423,7 @@ serial8250_pm(struct uart_port *port, un
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
- return 0x100000;
+ return 0x1000;
#ifdef CONFIG_ARCH_OMAP
if (is_omap_port(pt))
return 0x16 << pt->port.regshift;
@@ -2586,6 +2580,13 @@ static void serial8250_config_port(struc
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+#endif
+
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);
_
Patches currently in -mm which might be from manuel.lauss@xxxxxxxxxxxxxx are
origin.patch
linux-next.patch
serial-8250-fixes-for-alchemy-uarts.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
