The patch titled lis3lv02d: I2C support has been added to the -mm tree. Its filename is lis3lv02d-i2c-support.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: lis3lv02d: I2C support From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx> I2C bus support for lis3lv02d and variant accelerometer chips Signed-off-by: Samu Onkalo <samu.p.onkalo@xxxxxxxxx> Acked-by: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx> Cc: Pavel Machek <pavel@xxxxxx> Cc: Jean Delvare <khali@xxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/hwmon/Kconfig | 17 ++ drivers/hwmon/Makefile | 1 drivers/hwmon/lis3lv02d_i2c.c | 184 ++++++++++++++++++++++++++++++++ 3 files changed, 202 insertions(+) diff -puN drivers/hwmon/Kconfig~lis3lv02d-i2c-support drivers/hwmon/Kconfig --- a/drivers/hwmon/Kconfig~lis3lv02d-i2c-support +++ a/drivers/hwmon/Kconfig @@ -993,6 +993,23 @@ config SENSORS_LIS3_SPI will be called lis3lv02d and a specific module for the SPI transport is called lis3lv02d_spi. +config SENSORS_LIS3_I2C + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" + depends on I2C && INPUT + select INPUT_POLLDEV + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the device to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the I2C transport + is called lis3lv02d_i2c. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff -puN drivers/hwmon/Makefile~lis3lv02d-i2c-support drivers/hwmon/Makefile --- a/drivers/hwmon/Makefile~lis3lv02d-i2c-support +++ a/drivers/hwmon/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o +obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff -puN /dev/null drivers/hwmon/lis3lv02d_i2c.c --- /dev/null +++ a/drivers/hwmon/lis3lv02d_i2c.c @@ -0,0 +1,184 @@ +/* + * drivers/hwmon/lis3lv02d_i2c.c + * + * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. + * Driver is based on corresponding SPI driver written by Daniel Mack + * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@xxxxxxxx> ). + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo <samu.p.onkalo@xxxxxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_i2c" + +static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) +{ + struct i2c_client *c = lis3->bus_priv; + return i2c_smbus_write_byte_data(c, reg, value); +} + +static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + *v = i2c_smbus_read_byte_data(c, reg); + return 0; +} + +static int lis3_i2c_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0; + return lis3->write(lis3, CTRL_REG1, reg); +} + +/* Default axis mapping but it can be overwritten by platform data */ +static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X, + LIS3_DEV_Y, + LIS3_DEV_Z }; + +static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata) { + if (pdata->axis_x) + lis3lv02d_axis_map.x = pdata->axis_x; + + if (pdata->axis_y) + lis3lv02d_axis_map.y = pdata->axis_y; + + if (pdata->axis_z) + lis3lv02d_axis_map.z = pdata->axis_z; + + if (pdata->setup_resources) + ret = pdata->setup_resources(); + + if (ret) + goto fail; + } + + lis3_dev.pdata = pdata; + lis3_dev.bus_priv = client; + lis3_dev.init = lis3_i2c_init; + lis3_dev.read = lis3_i2c_read; + lis3_dev.write = lis3_i2c_write; + lis3_dev.irq = client->irq; + lis3_dev.ac = lis3lv02d_axis_map; + + i2c_set_clientdata(client, &lis3_dev); + ret = lis3lv02d_init_device(&lis3_dev); +fail: + return ret; +} + +static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata && pdata->release_resources) + pdata->release_resources(); + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(lis3); + + return lis3lv02d_remove_fs(&lis3_dev); +} + +#ifdef CONFIG_PM +static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3lv02d_i2c_resume(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweron(lis3); + return 0; +} + +static void lis3lv02d_i2c_shutdown(struct i2c_client *client) +{ + lis3lv02d_i2c_suspend(client, PMSG_SUSPEND); +} +#else +#define lis3lv02d_i2c_suspend NULL +#define lis3lv02d_i2c_resume NULL +#define lis3lv02d_i2c_shutdown NULL +#endif + +static const struct i2c_device_id lis3lv02d_id[] = { + {"lis3lv02d", 0 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); + +static struct i2c_driver lis3lv02d_i2c_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .suspend = lis3lv02d_i2c_suspend, + .shutdown = lis3lv02d_i2c_shutdown, + .resume = lis3lv02d_i2c_resume, + .probe = lis3lv02d_i2c_probe, + .remove = __devexit_p(lis3lv02d_i2c_remove), + .id_table = lis3lv02d_id, +}; + +static int __init lis3lv02d_init(void) +{ + return i2c_add_driver(&lis3lv02d_i2c_driver); +} + +static void __exit lis3lv02d_exit(void) +{ + i2c_del_driver(&lis3lv02d_i2c_driver); +} + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("lis3lv02d I2C interface"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:" DRV_NAME); + +module_init(lis3lv02d_init); +module_exit(lis3lv02d_exit); _ Patches currently in -mm which might be from samu.p.onkalo@xxxxxxxxx are lis3lv02d-axis-remap-and-resource-setup-release.patch lis3lv02d-i2c-support.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html