The patch titled s3cmci: fix direct write to interrupt mask has been removed from the -mm tree. Its filename was s3cmci-fix-direct-write-to-interrupt-mask.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: s3cmci: fix direct write to interrupt mask From: Ben Dooks <ben@xxxxxxxxxxxx> The clear_imask() call should be used to clear the interrupt mask register, as it may end up clearing the SDIO interrupt bit if this is enabled. Change all writes of zero to SDIIMSK register to use clear_imask() ready for the SDIO updates. Signed-off-by: Ben Dooks <ben@xxxxxxxxxxxx> Cc: <linux-mmc@xxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/s3cmci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff -puN drivers/mmc/host/s3cmci.c~s3cmci-fix-direct-write-to-interrupt-mask drivers/mmc/host/s3cmci.c --- a/drivers/mmc/host/s3cmci.c~s3cmci-fix-direct-write-to-interrupt-mask +++ a/drivers/mmc/host/s3cmci.c @@ -681,9 +681,9 @@ out: fail_request: host->mrq->data->error = -EINVAL; host->complete_what = COMPLETION_FINALIZE; - writel(0, host->base + host->sdiimsk); - goto out; + clear_imask(host); + goto out; } static void finalize_request(struct s3cmci_host *host) @@ -726,7 +726,7 @@ static void finalize_request(struct s3cm writel(0, host->base + S3C2410_SDICMDARG); writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); writel(0, host->base + S3C2410_SDICMDCON); - writel(0, host->base + host->sdiimsk); + clear_imask(host); if (cmd->data && cmd->error) cmd->data->error = cmd->error; _ Patches currently in -mm which might be from ben@xxxxxxxxxxxx are gpiolib-add-names-file-in-gpio-chip-sysfs.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html