The patch titled
scsi: hptiop: add RR44xx adapter support
has been removed from the -mm tree. Its filename was
hptiop-add-rr44xx-adapter-support.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: scsi: hptiop: add RR44xx adapter support
From: HighPoint Linux Team <linux@xxxxxxxxxxxxxxxxxx>
Most code changes were made to support RR44xx adapters.
- add more PCI device ID.
- using PCI BAR[2] to access RR44xx IOP.
- using PCI BAR[0] to check and clear RR44xx IRQ.
Signed-off-by: HighPoint Linux Team <linux@xxxxxxxxxxxxxxxxxx>
Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/scsi/hptiop.txt | 21 +++++++++++++++++-
drivers/scsi/hptiop.c | 37 ++++++++++++++++++++++----------
drivers/scsi/hptiop.h | 3 +-
3 files changed, 48 insertions(+), 13 deletions(-)
diff -puN Documentation/scsi/hptiop.txt~hptiop-add-rr44xx-adapter-support Documentation/scsi/hptiop.txt
--- a/Documentation/scsi/hptiop.txt~hptiop-add-rr44xx-adapter-support
+++ a/Documentation/scsi/hptiop.txt
@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER D
Controller Register Map
-------------------------
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+ BAR0 offset Register
+ 0x11C5C Link Interface IRQ Set
+ 0x11C60 Link Interface IRQ Clear
+
+ BAR2 offset Register
+ 0x10 Inbound Message Register 0
+ 0x14 Inbound Message Register 1
+ 0x18 Outbound Message Register 0
+ 0x1C Outbound Message Register 1
+ 0x20 Inbound Doorbell Register
+ 0x24 Inbound Interrupt Status Register
+ 0x28 Inbound Interrupt Mask Register
+ 0x30 Outbound Interrupt Status Register
+ 0x34 Outbound Interrupt Mask Register
+ 0x40 Inbound Queue Port
+ 0x44 Outbound Queue Port
+
For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
BAR0 offset Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attri
-----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
This file is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
diff -puN drivers/scsi/hptiop.c~hptiop-add-rr44xx-adapter-support drivers/scsi/hptiop.c
--- a/drivers/scsi/hptiop.c~hptiop-add-rr44xx-adapter-support
+++ a/drivers/scsi/hptiop.c
@@ -1,6 +1,6 @@
/*
* HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,7 +41,7 @@ MODULE_DESCRIPTION("HighPoint RocketRAID
static char driver_name[] = "hptiop";
static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver";
-static const char driver_ver[] = "v1.3 (071203)";
+static const char driver_ver[] = "v1.6 (090910)";
static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec);
static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag,
@@ -115,9 +115,13 @@ static void hptiop_drain_outbound_queue_
static int iop_intr_itl(struct hptiop_hba *hba)
{
struct hpt_iopmu_itl __iomem *iop = hba->u.itl.iop;
+ void __iomem *plx = hba->u.itl.plx;
u32 status;
int ret = 0;
+ if (plx && readl(plx + 0x11C5C) & 0xf)
+ writel(1, plx + 0x11C60);
+
status = readl(&iop->outbound_intstatus);
if (status & IOPMU_OUTBOUND_INT_MSG0) {
@@ -460,15 +464,25 @@ static void __iomem *hptiop_map_pci_bar(
static int hptiop_map_pci_bar_itl(struct hptiop_hba *hba)
{
+ struct pci_dev *pcidev = hba->pcidev;
hba->u.itl.iop = hptiop_map_pci_bar(hba, 0);
- if (hba->u.itl.iop)
- return 0;
- else
+ if (hba->u.itl.iop == NULL)
return -1;
+ if ((pcidev->device & 0xff00) == 0x4400) {
+ hba->u.itl.plx = hba->u.itl.iop;
+ hba->u.itl.iop = hptiop_map_pci_bar(hba, 2);
+ if (hba->u.itl.iop == NULL) {
+ iounmap(hba->u.itl.plx);
+ return -1;
+ }
+ }
+ return 0;
}
static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba)
{
+ if (hba->u.itl.plx)
+ iounmap(hba->u.itl.plx);
iounmap(hba->u.itl.iop);
}
@@ -1239,22 +1253,23 @@ static struct hptiop_adapter_ops hptiop_
static struct pci_device_id hptiop_id_table[] = {
{ PCI_VDEVICE(TTI, 0x3220), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3320), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3510), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3511), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3521), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4400), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
diff -puN drivers/scsi/hptiop.h~hptiop-add-rr44xx-adapter-support drivers/scsi/hptiop.h
--- a/drivers/scsi/hptiop.h~hptiop-add-rr44xx-adapter-support
+++ a/drivers/scsi/hptiop.h
@@ -1,6 +1,6 @@
/*
* HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -228,6 +228,7 @@ struct hptiop_hba {
union {
struct {
struct hpt_iopmu_itl __iomem *iop;
+ void __iomem *plx;
} itl;
struct {
struct hpt_iopmv_regs *regs;
_
Patches currently in -mm which might be from linux@xxxxxxxxxxxxxxxxxx are
linux-next.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
