The patch titled
powerpc/85xx: add eSDHC support for MPC8536DS boards
has been added to the -mm tree. Its filename is
powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: powerpc/85xx: add eSDHC support for MPC8536DS boards
From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
This patch simply adds sdhci node to the device tree.
We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500 MHz)
on new board revisions. For non-default setups, it's recommended to
upgrade U-Boot, since it will fixup clock-frequency automatically.
Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
Cc: Pierre Ossman <pierre@xxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
Cc: David Vrabel <david.vrabel@xxxxxxx>
Cc: Ben Dooks <ben@xxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: <linux-mmc@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/powerpc/boot/dts/mpc8536ds.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff -puN arch/powerpc/boot/dts/mpc8536ds.dts~powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards arch/powerpc/boot/dts/mpc8536ds.dts
--- a/arch/powerpc/boot/dts/mpc8536ds.dts~powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards
+++ a/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -250,6 +250,14 @@
phy_type = "ulpi";
};
+ sdhci@2e000 {
+ compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <250000000>;
+ };
+
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
_
Patches currently in -mm which might be from avorontsov@xxxxxxxxxxxxx are
linux-next.patch
mtd-sst25l-non-jedec-spi-flash-driver.patch
mtd-m25p80-fix-null-pointer-dereference-bug.patch
sdhci-be-more-strict-with-get_min_clock-usage.patch
sdhci-of-fix-sd-clock-calculation.patch
sdhci-of-avoid-writing-reserved-bits-into-host-control-register.patch
sdhci-of-fix-high-speed-cards-recognition.patch
powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc.patch
sdhci-of-dont-hard-code-inverted-write-protect-quirk.patch
sdhci-of-cleanup-esdhcs-set_clock-a-little-bit.patch
powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards.patch
spi-add-support-for-device-table-matching.patch
mtd-m25p80-convert-to-device-table-matching.patch
of-remove-stmm25p40-alias.patch
hwmon-adxx-convert-to-device-table-matching.patch
hwmon-lm70-convert-to-device-table-matching.patch
spi-prefix-modalias-with-spi.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
