+ mmc-check-status-after-mmc-switch-command.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     mmc: check status after MMC SWITCH command
has been added to the -mm tree.  Its filename is
     mmc-check-status-after-mmc-switch-command.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: mmc: check status after MMC SWITCH command
From: Adrian Hunter <adrian.hunter@xxxxxxxxx>

According to the standard, the SWITCH command should be followed by a
SEND_STATUS command to check for errors.

Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
Cc: Ian Molton <ian@xxxxxxxxxxxxxx>
Cc: "Roberto A. Foglietta" <roberto.foglietta@xxxxxxxxx>
Cc: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
Cc: Denis Karpov <ext-denis.2.karpov@xxxxxxxxx>
Cc: Pierre Ossman <pierre@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/mmc/core/mmc.c     |   24 ++++++++++++++++++------
 drivers/mmc/core/mmc_ops.c |   23 +++++++++++++++++++++++
 include/linux/mmc/mmc.h    |    1 +
 3 files changed, 42 insertions(+), 6 deletions(-)

diff -puN drivers/mmc/core/mmc.c~mmc-check-status-after-mmc-switch-command drivers/mmc/core/mmc.c
--- a/drivers/mmc/core/mmc.c~mmc-check-status-after-mmc-switch-command
+++ a/drivers/mmc/core/mmc.c
@@ -416,12 +416,17 @@ static int mmc_init_card(struct mmc_host
 		(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			EXT_CSD_HS_TIMING, 1);
-		if (err)
+		if (err && err != -EBADMSG)
 			goto free_card;
 
-		mmc_card_set_highspeed(card);
-
-		mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+		if (err) {
+			printk(KERN_WARNING "%s: switch to highspeed failed\n",
+			       mmc_hostname(card->host));
+			err = 0;
+		} else {
+			mmc_card_set_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+		}
 	}
 
 	/*
@@ -456,10 +461,17 @@ static int mmc_init_card(struct mmc_host
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				 EXT_CSD_BUS_WIDTH, ext_csd_bit);
 
-		if (err)
+		if (err && err != -EBADMSG)
 			goto free_card;
 
-		mmc_set_bus_width(card->host, bus_width);
+		if (err) {
+			printk(KERN_WARNING "%s: switch to bus width %d "
+			       "failed\n", mmc_hostname(card->host),
+			       1 << bus_width);
+			err = 0;
+		} else {
+			mmc_set_bus_width(card->host, bus_width);
+		}
 	}
 
 	if (!oldcard)
diff -puN drivers/mmc/core/mmc_ops.c~mmc-check-status-after-mmc-switch-command drivers/mmc/core/mmc_ops.c
--- a/drivers/mmc/core/mmc_ops.c~mmc-check-status-after-mmc-switch-command
+++ a/drivers/mmc/core/mmc_ops.c
@@ -390,6 +390,7 @@ int mmc_switch(struct mmc_card *card, u8
 {
 	int err;
 	struct mmc_command cmd;
+	u32 status;
 
 	BUG_ON(!card);
 	BUG_ON(!card->host);
@@ -407,6 +408,28 @@ int mmc_switch(struct mmc_card *card, u8
 	if (err)
 		return err;
 
+	/* Must check status to be sure of no errors */
+	do {
+		err = mmc_send_status(card, &status);
+		if (err)
+			return err;
+		if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+			break;
+		if (mmc_host_is_spi(card->host))
+			break;
+	} while (R1_CURRENT_STATE(status) == 7);
+
+	if (mmc_host_is_spi(card->host)) {
+		if (status & R1_SPI_ILLEGAL_COMMAND)
+			return -EBADMSG;
+	} else {
+		if (status & 0xFDFFA000)
+			printk(KERN_WARNING "%s: unexpected status %#x after "
+			       "switch", mmc_hostname(card->host), status);
+		if (status & R1_SWITCH_ERROR)
+			return -EBADMSG;
+	}
+
 	return 0;
 }
 
diff -puN include/linux/mmc/mmc.h~mmc-check-status-after-mmc-switch-command include/linux/mmc/mmc.h
--- a/include/linux/mmc/mmc.h~mmc-check-status-after-mmc-switch-command
+++ a/include/linux/mmc/mmc.h
@@ -128,6 +128,7 @@
 #define R1_STATUS(x)            (x & 0xFFFFE000)
 #define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
 #define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
+#define R1_SWITCH_ERROR		(1 << 7)	/* sx, c */
 #define R1_APP_CMD		(1 << 5)	/* sr, c */
 
 /*
_

Patches currently in -mm which might be from adrian.hunter@xxxxxxxxx are

mmc-register-mmci-omap-hs-using-platform_driver_probe.patch
mmc-add-enable-and-disable-methods-to-mmc-host.patch
mmc-allow-host-claim-release-nesting.patch
mmc-add-mmc_cap_nonremovable-host-capability.patch
mmc-add-ability-to-save-power-by-powering-off-cards.patch
mmc-add-mmc-card-sleep-and-awake-support.patch
mmc-power-off-once-at-removal.patch
mmc-add-host-capabilities-for-sd-only-and-mmc-only.patch
mmc-check-status-after-mmc-switch-command.patch
omap_hsmmc-add-debugfs-entry-host-registers.patch
omap_hsmmc-make-use-of-new-enable-disable-interface.patch
arm-omap-mmc-twl4030-add-context-loss-counter-support.patch
omap_hsmmc-keep-track-of-power-mode.patch
omap_hsmmc-context-save-restore-support.patch
omap_hsmmc-set-open-drain-bit-correctly.patch
omap_hsmmc-ensure-workqueues-are-empty-before-suspend.patch
omap_hsmmc-fix-scatter-gather-list-sanity-checking.patch
omap_hsmmc-make-use-of-new-mmc_cap_nonremovable-host-capability.patch
omap_hsmmc-support-for-deeper-power-saving-states.patch
arm-omap-mmc-twl4030-add-regulator-sleep-wake-function.patch
omap_hsmmc-put-mmc-regulator-to-sleep.patch
omap_hsmmc-add-mmc-card-sleep-and-awake-support.patch
omap_hsmmc-fix-null-pointer-dereference.patch
omap_hsmmc-cleanup-macro-usage.patch
omap_hsmmc-clear-interrupt-status-after-init-sequence.patch
omap_hsmmc-cater-for-weird-cmd6-behaviour.patch
omap_hsmmc-prevent-races-with-irq-handler.patch
omap_hsmmc-pass-host-capabilities-for-sd-only-and-mmc-only.patch
omap_hsmmc-code-refactoring.patch
omap_hsmmc-protect-the-card-when-the-cover-is-open.patch
omap_hsmmc-ensure-all-clock-enables-and-disables-are-paired.patch
omap_hsmmc-set-a-large-data-timeout-for-commands-with-busy-signal.patch
arm-omap-rx51-set-mmc-capabilities-and-power-saving-flag.patch

--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux