The patch titled input: tsc2007: remove HR timer has been added to the -mm tree. Its filename is input-tsc2007-remove-hr-timer.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: input: tsc2007: remove HR timer From: Richard Röjfors <richard.rojfors.ext@xxxxxxxxxxxxxxx> Remove the HR timer, since it's bad to do synchronous I2C in the HR timer callback context. The new implementation makes use of the global workqueue. The work is scheduled every 5ms when polling rather than 5 us. Signed-off-by: Richard Röjfors <richard.rojfors.ext@xxxxxxxxxxxxxxx> Cc: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx> Cc: Trilok Soni <soni.trilok@xxxxxxxxx> Cc: <kwangwoo.lee@xxxxxxxxx> Cc: Dmitry Torokhov <dtor@xxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/input/touchscreen/tsc2007.c | 49 +++++++------------------- 1 file changed, 14 insertions(+), 35 deletions(-) diff -puN drivers/input/touchscreen/tsc2007.c~input-tsc2007-remove-hr-timer drivers/input/touchscreen/tsc2007.c --- a/drivers/input/touchscreen/tsc2007.c~input-tsc2007-remove-hr-timer +++ a/drivers/input/touchscreen/tsc2007.c @@ -21,15 +21,13 @@ */ #include <linux/module.h> -#include <linux/hrtimer.h> #include <linux/slab.h> #include <linux/input.h> #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> -#define TS_POLL_DELAY (10 * 1000) /* ns delay before the first sample */ -#define TS_POLL_PERIOD (5 * 1000) /* ns delay between samples */ +#define TS_POLL_PERIOD msecs_to_jiffies(5) /* ms delay between samples */ #define TSC2007_MEASURE_TEMP0 (0x0 << 4) #define TSC2007_MEASURE_AUX (0x2 << 4) @@ -70,13 +68,11 @@ struct ts_event { struct tsc2007 { struct input_dev *input; char phys[32]; - struct hrtimer timer; + struct delayed_work work; struct ts_event tc; struct i2c_client *client; - spinlock_t lock; - u16 model; u16 x_plate_ohms; @@ -142,8 +138,7 @@ static void tsc2007_send_event(void *tsc if (rt > MAX_12BIT) { dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), - HRTIMER_MODE_REL); + schedule_delayed_work(&ts->work, TS_POLL_PERIOD); return; } @@ -153,7 +148,7 @@ static void tsc2007_send_event(void *tsc * in some cases may not even settle at the expected value. * * The only safe way to check for the pen up condition is in the - * timer by reading the pen signal state (it's a GPIO _and_ IRQ). + * work function by reading the pen signal state (it's a GPIO and IRQ). */ if (rt) { struct input_dev *input = ts->input; @@ -175,8 +170,7 @@ static void tsc2007_send_event(void *tsc x, y, rt); } - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), - HRTIMER_MODE_REL); + schedule_delayed_work(&ts->work, TS_POLL_PERIOD); } static int tsc2007_read_values(struct tsc2007 *tsc) @@ -197,13 +191,10 @@ static int tsc2007_read_values(struct ts return 0; } -static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) +static void tsc2007_work(struct work_struct *work) { - struct tsc2007 *ts = container_of(handle, struct tsc2007, timer); - unsigned long flags; - - spin_lock_irqsave(&ts->lock, flags); - + struct tsc2007 *ts = + container_of(to_delayed_work(work), struct tsc2007, work); if (unlikely(!ts->get_pendown_state() && ts->pendown)) { struct input_dev *input = ts->input; @@ -222,30 +213,20 @@ static enum hrtimer_restart tsc2007_time tsc2007_read_values(ts); tsc2007_send_event(ts); } - - spin_unlock_irqrestore(&ts->lock, flags); - - return HRTIMER_NORESTART; } static irqreturn_t tsc2007_irq(int irq, void *handle) { struct tsc2007 *ts = handle; - unsigned long flags; - - spin_lock_irqsave(&ts->lock, flags); if (likely(ts->get_pendown_state())) { disable_irq_nosync(ts->irq); - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), - HRTIMER_MODE_REL); + schedule_delayed_work(&ts->work, 0); } if (ts->clear_penirq) ts->clear_penirq(); - spin_unlock_irqrestore(&ts->lock, flags); - return IRQ_HANDLED; } @@ -278,11 +259,6 @@ static int tsc2007_probe(struct i2c_clie ts->input = input_dev; - hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - ts->timer.function = tsc2007_timer; - - spin_lock_init(&ts->lock); - ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; ts->get_pendown_state = pdata->get_pendown_state; @@ -308,6 +284,8 @@ static int tsc2007_probe(struct i2c_clie ts->irq = client->irq; + INIT_DELAYED_WORK(&ts->work, tsc2007_work); + err = request_irq(ts->irq, tsc2007_irq, 0, client->dev.driver->name, ts); if (err < 0) { @@ -325,7 +303,6 @@ static int tsc2007_probe(struct i2c_clie err_free_irq: free_irq(ts->irq, ts); - hrtimer_cancel(&ts->timer); err_free_mem: input_free_device(input_dev); kfree(ts); @@ -337,11 +314,13 @@ static int tsc2007_remove(struct i2c_cli struct tsc2007 *ts = i2c_get_clientdata(client); struct tsc2007_platform_data *pdata; + /* cancel any work */ + cancel_delayed_work(&ts->work); + pdata = client->dev.platform_data; pdata->exit_platform_hw(); free_irq(ts->irq, ts); - hrtimer_cancel(&ts->timer); input_unregister_device(ts->input); kfree(ts); _ Patches currently in -mm which might be from richard.rojfors.ext@xxxxxxxxxxxxxxx are video-initial-support-for-adv7180.patch input-tsc2007-remove-hr-timer.patch input-tsc2007-make-platform-callbacks-optional.patch gpio-add-mc33880-driver.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html