The patch titled
xtensa: s6105 specific configuration for s6gmac
has been removed from the -mm tree. Its filename was
xtensa-s6105-specific-configuration-for-s6gmac.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: xtensa: s6105 specific configuration for s6gmac
From: Oskar Schirmer <os@xxxxxxxxx>
Platform-specific configuration for the s6gmac driver, including the
PHY interrupt line.
Signed-off-by: Daniel Glockner <dg@xxxxxxxxx>
Signed-off-by: Oskar Schirmer <os@xxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Johannes Weiner <jw@xxxxxxxxx>
Cc: Christian Zankel <chris@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/xtensa/platforms/s6105/device.c | 91 +++++++++++++++++++++++++
arch/xtensa/platforms/s6105/setup.c | 9 ++
2 files changed, 100 insertions(+)
diff -puN arch/xtensa/platforms/s6105/device.c~xtensa-s6105-specific-configuration-for-s6gmac arch/xtensa/platforms/s6105/device.c
--- a/arch/xtensa/platforms/s6105/device.c~xtensa-s6105-specific-configuration-for-s6gmac
+++ a/arch/xtensa/platforms/s6105/device.c
@@ -5,14 +5,27 @@
*/
#include <linux/kernel.h>
+#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <variant/hardware.h>
+#include <variant/dmac.h>
+#include <platform/gpio.h>
+
+#define GPIO3_INTNUM 3
#define UART_INTNUM 4
+#define GMAC_INTNUM 5
+
+static const signed char gpio3_irq_mappings[] = {
+ S6_INTC_GPIO(3),
+ -1
+};
static const signed char uart_irq_mappings[] = {
S6_INTC_UART(0),
@@ -20,8 +33,18 @@ static const signed char uart_irq_mappin
-1,
};
+static const signed char gmac_irq_mappings[] = {
+ S6_INTC_GMAC_STAT,
+ S6_INTC_GMAC_ERR,
+ S6_INTC_DMA_HOSTTERMCNT(0),
+ S6_INTC_DMA_HOSTTERMCNT(1),
+ -1
+};
+
const signed char *platform_irq_mappings[NR_IRQS] = {
+ [GPIO3_INTNUM] = gpio3_irq_mappings,
[UART_INTNUM] = uart_irq_mappings,
+ [GMAC_INTNUM] = gmac_irq_mappings,
};
static struct plat_serial8250_port serial_platform_data[] = {
@@ -46,6 +69,66 @@ static struct plat_serial8250_port seria
{ },
};
+static struct resource s6_gmac_resource[] = {
+ {
+ .name = "mem",
+ .start = (resource_size_t)S6_REG_GMAC,
+ .end = (resource_size_t)S6_REG_GMAC + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "dma",
+ .start = (resource_size_t)
+ DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX),
+ .end = (resource_size_t)
+ DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX) + 0x100 - 1,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .name = "dma",
+ .start = (resource_size_t)
+ DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX),
+ .end = (resource_size_t)
+ DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX) + 0x100 - 1,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .name = "io",
+ .start = (resource_size_t)S6_MEM_GMAC,
+ .end = (resource_size_t)S6_MEM_GMAC + 0x2000000 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "irq",
+ .start = (resource_size_t)GMAC_INTNUM,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "irq",
+ .start = (resource_size_t)PHY_POLL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __init prepare_phy_irq(int pin)
+{
+ int irq;
+ if (gpio_request(pin, "s6gmac_phy") < 0)
+ goto fail;
+ if (gpio_direction_input(pin) < 0)
+ goto free;
+ irq = gpio_to_irq(pin);
+ if (irq < 0)
+ goto free;
+ if (set_irq_type(irq, IRQ_TYPE_LEVEL_LOW) < 0)
+ goto free;
+ return irq;
+free:
+ gpio_free(pin);
+fail:
+ return PHY_POLL;
+}
+
static struct platform_device platform_devices[] = {
{
.name = "serial8250",
@@ -54,12 +137,20 @@ static struct platform_device platform_d
.platform_data = serial_platform_data,
},
},
+ {
+ .name = "s6gmac",
+ .id = 0,
+ .resource = s6_gmac_resource,
+ .num_resources = ARRAY_SIZE(s6_gmac_resource),
+ },
};
static int __init device_init(void)
{
int i;
+ s6_gmac_resource[5].start = prepare_phy_irq(GPIO_PHY_IRQ);
+
for (i = 0; i < ARRAY_SIZE(platform_devices); i++)
platform_device_register(&platform_devices[i]);
return 0;
diff -puN arch/xtensa/platforms/s6105/setup.c~xtensa-s6105-specific-configuration-for-s6gmac arch/xtensa/platforms/s6105/setup.c
--- a/arch/xtensa/platforms/s6105/setup.c~xtensa-s6105-specific-configuration-for-s6gmac
+++ a/arch/xtensa/platforms/s6105/setup.c
@@ -35,12 +35,21 @@ void __init platform_setup(char **cmdlin
{
unsigned long reg;
+ reg = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL);
+ reg &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC |
+ S6_GREG1_PLLSEL_GMII_MASK << S6_GREG1_PLLSEL_GMII);
+ reg |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC |
+ S6_GREG1_PLLSEL_GMII_125MHZ << S6_GREG1_PLLSEL_GMII;
+ writel(reg, S6_REG_GREG1 + S6_GREG1_PLLSEL);
+
reg = readl(S6_REG_GREG1 + S6_GREG1_CLKGATE);
reg &= ~(1 << S6_GREG1_BLOCK_SB);
+ reg &= ~(1 << S6_GREG1_BLOCK_GMAC);
writel(reg, S6_REG_GREG1 + S6_GREG1_CLKGATE);
reg = readl(S6_REG_GREG1 + S6_GREG1_BLOCKENA);
reg |= 1 << S6_GREG1_BLOCK_SB;
+ reg |= 1 << S6_GREG1_BLOCK_GMAC;
writel(reg, S6_REG_GREG1 + S6_GREG1_BLOCKENA);
printk(KERN_NOTICE "S6105 on Stretch S6000 - "
_
Patches currently in -mm which might be from os@xxxxxxxxx are
origin.patch
xtensa-variant-specific-code.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
