The patch titled Samsung SoC Framebuffer driver: add Alpha Channel support has been removed from the -mm tree. Its filename was samsung-soc-framebuffer-driver-add-alpha-channel-support.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: Samsung SoC Framebuffer driver: add Alpha Channel support From: InKi Dae <daeinki@xxxxxxxxx> Add support for the ARGB1888 and ARGB4888 hardware to the Samsung SoC Framebuffer driver (s3c-fb.c). ARGB1888 and ARGB4888 is decided by var->transp.length and this variable is set by s3c_fb_check_var(). In s3c_fb_check_var(), if var->vits_per_pixel is 25 or 28, then var->transp.length would be 1 or 3. Therefore alpha mode(ARGB1888 or ARGB4888) could be decided through that variable. For using alpha mode, you need to set the following: This code should be added to your machine code as platform data. static struct s3c_fb_pd_win xxx_fb_win0 = { /* this is to ensure we use win0 */ .win_mode = { .pixclock = (8+8+8+240)*(38+4+38+400), .left_margin = 8, .right_margin = 8, .upper_margin = 38, .lower_margin = 38, .hsync_len = 8, .vsync_len = 4, .xres = 240, .yres = 400, }, .max_bpp = 32, .default_bpp = 24, }; static struct s3c_fb_pd_win xxx_fb_win1 = { .win_mode = { .pixclock = (8+8+8+240)*(38+4+38+400), .left_margin = 8, .right_margin = 8, .upper_margin = 38, .lower_margin = 38, .hsync_len = 8, .vsync_len = 4, .xres = 240, .yres = 400, }, .max_bpp = 32, .default_bpp = 28, }; static struct s3c_fb_platdata xxx_lcd_pdata __initdata = { .win[0] = &ncp_fb_win0, .win[1] = &ncp_fb_win1, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = xxx_fb_gpio_setup, }; s3c_fb_set_platdata(&xxx_lcd_pdata); The above code sets pixelformat for window0 layer to RGB888 and window1 layer to ARGB4888. Signed-off-by: InKi Dae <inki.dae@xxxxxxxxxxx> Cc: Ben Dooks <ben-linux@xxxxxxxxx> Cc: Kyungmin Park <kmpark@xxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/video/s3c-fb.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff -puN drivers/video/s3c-fb.c~samsung-soc-framebuffer-driver-add-alpha-channel-support drivers/video/s3c-fb.c --- a/drivers/video/s3c-fb.c~samsung-soc-framebuffer-driver-add-alpha-channel-support +++ a/drivers/video/s3c-fb.c @@ -358,9 +358,16 @@ static int s3c_fb_set_par(struct fb_info writel(data, regs + VIDOSD_B(win_no)); data = var->xres * var->yres; + + u32 osdc_data = 0; + + osdc_data = VIDISD14C_ALPHA1_R(0xf) | + VIDISD14C_ALPHA1_G(0xf) | + VIDISD14C_ALPHA1_B(0xf); + if (s3c_fb_has_osd_d(win_no)) { writel(data, regs + VIDOSD_D(win_no)); - writel(0, regs + VIDOSD_C(win_no)); + writel(osdc_data, regs + VIDOSD_C(win_no)); } else writel(data, regs + VIDOSD_C(win_no)); @@ -409,8 +416,12 @@ static int s3c_fb_set_par(struct fb_info data |= WINCON1_BPPMODE_19BPP_A1666; else data |= WINCON1_BPPMODE_18BPP_666; - } else if (var->transp.length != 0) - data |= WINCON1_BPPMODE_25BPP_A1888; + } else if (var->transp.length == 1) + data |= WINCON1_BPPMODE_25BPP_A1888 + | WINCON1_BLD_PIX; + else if (var->transp.length == 4) + data |= WINCON1_BPPMODE_28BPP_A4888 + | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL; else data |= WINCON0_BPPMODE_24BPP_888; @@ -418,6 +429,20 @@ static int s3c_fb_set_par(struct fb_info break; } + /* It has no color key control register for window0 */ + if (win_no > 0) { + u32 keycon0_data = 0, keycon1_data = 0; + + keycon0_data = ~(WxKEYCON0_KEYBL_EN | + WxKEYCON0_KEYEN_F | + WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); + + keycon1_data = WxKEYCON1_COLVAL(0xffffff); + + writel(keycon0_data, regs + WxKEYCONy(win_no-1, 0)); + writel(keycon1_data, regs + WxKEYCONy(win_no-1, 1)); + } + writel(data, regs + WINCON(win_no)); writel(0x0, regs + WINxMAP(win_no)); _ Patches currently in -mm which might be from daeinki@xxxxxxxxx are origin.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html