The patch titled
kernel-doc: cleanup perl script
has been removed from the -mm tree. Its filename was
kernel-doc-cleanup-perl-script.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: kernel-doc: cleanup perl script
From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Various cleanups of scripts/kernel-doc:
- don't use **/ as an ending kernel-doc block since it's not preferred;
- typos/spellos
- add whitespace around ==, after comma, & around . operator;
Signed-off-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
scripts/kernel-doc | 174 +++++++++++++++++++++----------------------
1 file changed, 87 insertions(+), 87 deletions(-)
diff -puN scripts/kernel-doc~kernel-doc-cleanup-perl-script scripts/kernel-doc
--- a/scripts/kernel-doc~kernel-doc-cleanup-perl-script
+++ a/scripts/kernel-doc
@@ -5,7 +5,7 @@ use strict;
## Copyright (c) 1998 Michael Zucchi, All Rights Reserved ##
## Copyright (C) 2000, 1 Tim Waugh <twaugh@xxxxxxxxxx> ##
## Copyright (C) 2001 Simon Huggins ##
-## Copyright (C) 2005-2008 Randy Dunlap ##
+## Copyright (C) 2005-2009 Randy Dunlap ##
## ##
## #define enhancements by Armin Kuster <akuster@xxxxxxxxxx> ##
## Copyright (c) 2000 MontaVista Software, Inc. ##
@@ -85,7 +85,7 @@ use strict;
#
# /**
# * my_function
-# **/
+# */
#
# If the Description: header tag is omitted, then there must be a blank line
# after the last parameter specification.
@@ -105,7 +105,7 @@ use strict;
# */
# etc.
#
-# Beside functions you can also write documentation for structs, unions,
+# Besides functions you can also write documentation for structs, unions,
# enums and typedefs. Instead of the function name you must write the name
# of the declaration; the struct/union/enum/typedef must always precede
# the name. Nesting of declarations is not supported.
@@ -223,7 +223,7 @@ sub usage {
}
# read arguments
-if ($#ARGV==-1) {
+if ($#ARGV == -1) {
usage();
}
@@ -240,12 +240,12 @@ my $man_date = ('January', 'February', '
" " . ((localtime)[5]+1900);
# Essentially these are globals
-# They probably want to be tidied up made more localised or summat.
-# CAVEAT EMPTOR! Some of the others I localised may not want to be which
+# They probably want to be tidied up, made more localised or something.
+# CAVEAT EMPTOR! Some of the others I localised may not want to be, which
# could cause "use of undefined value" or other bugs.
-my ($function, %function_table,%parametertypes,$declaration_purpose);
-my ($type,$declaration_name,$return_type);
-my ($newsection,$newcontents,$prototype,$filelist, $brcount, %source_map);
+my ($function, %function_table, %parametertypes, $declaration_purpose);
+my ($type, $declaration_name, $return_type);
+my ($newsection, $newcontents, $prototype, $filelist, $brcount, %source_map);
if (defined($ENV{'KBUILD_VERBOSE'})) {
$verbose = "$ENV{'KBUILD_VERBOSE'}";
@@ -279,10 +279,10 @@ my $doc_special = "\@\%\$\&";
my $doc_start = '^/\*\*\s*$'; # Allow whitespace at end of comment start.
my $doc_end = '\*/';
my $doc_com = '\s*\*\s*';
-my $doc_decl = $doc_com.'(\w+)';
-my $doc_sect = $doc_com.'(['.$doc_special.']?[\w\s]+):(.*)';
-my $doc_content = $doc_com.'(.*)';
-my $doc_block = $doc_com.'DOC:\s*(.*)?';
+my $doc_decl = $doc_com . '(\w+)';
+my $doc_sect = $doc_com . '([' . $doc_special . ']?[\w\s]+):(.*)';
+my $doc_content = $doc_com . '(.*)';
+my $doc_block = $doc_com . 'DOC:\s*(.*)?';
my %constants;
my %parameterdescs;
@@ -485,12 +485,12 @@ sub output_enum_html(%) {
my %args = %{$_[0]};
my ($parameter);
my $count;
- print "<h2>enum ".$args{'enum'}."</h2>\n";
+ print "<h2>enum " . $args{'enum'} . "</h2>\n";
- print "<b>enum ".$args{'enum'}."</b> {<br>\n";
+ print "<b>enum " . $args{'enum'} . "</b> {<br>\n";
$count = 0;
foreach $parameter (@{$args{'parameterlist'}}) {
- print " <b>".$parameter."</b>";
+ print " <b>" . $parameter . "</b>";
if ($count != $#{$args{'parameterlist'}}) {
$count++;
print ",\n";
@@ -502,7 +502,7 @@ sub output_enum_html(%) {
print "<h3>Constants</h3>\n";
print "<dl>\n";
foreach $parameter (@{$args{'parameterlist'}}) {
- print "<dt><b>".$parameter."</b>\n";
+ print "<dt><b>" . $parameter . "</b>\n";
print "<dd>";
output_highlight($args{'parameterdescs'}{$parameter});
}
@@ -516,9 +516,9 @@ sub output_typedef_html(%) {
my %args = %{$_[0]};
my ($parameter);
my $count;
- print "<h2>typedef ".$args{'typedef'}."</h2>\n";
+ print "<h2>typedef " . $args{'typedef'} . "</h2>\n";
- print "<b>typedef ".$args{'typedef'}."</b>\n";
+ print "<b>typedef " . $args{'typedef'} . "</b>\n";
output_section_html(@_);
print "<hr>\n";
}
@@ -528,8 +528,8 @@ sub output_struct_html(%) {
my %args = %{$_[0]};
my ($parameter);
- print "<h2>".$args{'type'}." ".$args{'struct'}. " - " .$args{'purpose'}."</h2>\n";
- print "<b>".$args{'type'}." ".$args{'struct'}."</b> {<br>\n";
+ print "<h2>" . $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "</h2>\n";
+ print "<b>" . $args{'type'} . " " . $args{'struct'} . "</b> {<br>\n";
foreach $parameter (@{$args{'parameterlist'}}) {
if ($parameter =~ /^#/) {
print "$parameter<br>\n";
@@ -561,7 +561,7 @@ sub output_struct_html(%) {
$parameter_name =~ s/\[.*//;
($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
- print "<dt><b>".$parameter."</b>\n";
+ print "<dt><b>" . $parameter . "</b>\n";
print "<dd>";
output_highlight($args{'parameterdescs'}{$parameter_name});
}
@@ -576,9 +576,9 @@ sub output_function_html(%) {
my ($parameter, $section);
my $count;
- print "<h2>" .$args{'function'}." - ".$args{'purpose'}."</h2>\n";
- print "<i>".$args{'functiontype'}."</i>\n";
- print "<b>".$args{'function'}."</b>\n";
+ print "<h2>" . $args{'function'} . " - " . $args{'purpose'} . "</h2>\n";
+ print "<i>" . $args{'functiontype'} . "</i>\n";
+ print "<b>" . $args{'function'} . "</b>\n";
print "(";
$count = 0;
foreach $parameter (@{$args{'parameterlist'}}) {
@@ -587,7 +587,7 @@ sub output_function_html(%) {
# pointer-to-function
print "<i>$1</i><b>$parameter</b>) <i>($2)</i>";
} else {
- print "<i>".$type."</i> <b>".$parameter."</b>";
+ print "<i>" . $type . "</i> <b>" . $parameter . "</b>";
}
if ($count != $#{$args{'parameterlist'}}) {
$count++;
@@ -603,7 +603,7 @@ sub output_function_html(%) {
$parameter_name =~ s/\[.*//;
($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
- print "<dt><b>".$parameter."</b>\n";
+ print "<dt><b>" . $parameter . "</b>\n";
print "<dd>";
output_highlight($args{'parameterdescs'}{$parameter_name});
}
@@ -657,7 +657,7 @@ sub output_function_xml(%) {
my $count;
my $id;
- $id = "API-".$args{'function'};
+ $id = "API-" . $args{'function'};
$id =~ s/[^A-Za-z0-9]/-/g;
print "<refentry id=\"$id\">\n";
@@ -667,12 +667,12 @@ sub output_function_xml(%) {
print " <date>$man_date</date>\n";
print "</refentryinfo>\n";
print "<refmeta>\n";
- print " <refentrytitle><phrase>".$args{'function'}."</phrase></refentrytitle>\n";
+ print " <refentrytitle><phrase>" . $args{'function'} . "</phrase></refentrytitle>\n";
print " <manvolnum>9</manvolnum>\n";
print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
print "</refmeta>\n";
print "<refnamediv>\n";
- print " <refname>".$args{'function'}."</refname>\n";
+ print " <refname>" . $args{'function'} . "</refname>\n";
print " <refpurpose>\n";
print " ";
output_highlight ($args{'purpose'});
@@ -682,8 +682,8 @@ sub output_function_xml(%) {
print "<refsynopsisdiv>\n";
print " <title>Synopsis</title>\n";
print " <funcsynopsis><funcprototype>\n";
- print " <funcdef>".$args{'functiontype'}." ";
- print "<function>".$args{'function'}." </function></funcdef>\n";
+ print " <funcdef>" . $args{'functiontype'} . " ";
+ print "<function>" . $args{'function'} . " </function></funcdef>\n";
$count = 0;
if ($#{$args{'parameterlist'}} >= 0) {
@@ -694,7 +694,7 @@ sub output_function_xml(%) {
print " <paramdef>$1<parameter>$parameter</parameter>)\n";
print " <funcparams>$2</funcparams></paramdef>\n";
} else {
- print " <paramdef>".$type;
+ print " <paramdef>" . $type;
print " <parameter>$parameter</parameter></paramdef>\n";
}
}
@@ -734,7 +734,7 @@ sub output_struct_xml(%) {
my ($parameter, $section);
my $id;
- $id = "API-struct-".$args{'struct'};
+ $id = "API-struct-" . $args{'struct'};
$id =~ s/[^A-Za-z0-9]/-/g;
print "<refentry id=\"$id\">\n";
@@ -744,12 +744,12 @@ sub output_struct_xml(%) {
print " <date>$man_date</date>\n";
print "</refentryinfo>\n";
print "<refmeta>\n";
- print " <refentrytitle><phrase>".$args{'type'}." ".$args{'struct'}."</phrase></refentrytitle>\n";
+ print " <refentrytitle><phrase>" . $args{'type'} . " " . $args{'struct'} . "</phrase></refentrytitle>\n";
print " <manvolnum>9</manvolnum>\n";
print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
print "</refmeta>\n";
print "<refnamediv>\n";
- print " <refname>".$args{'type'}." ".$args{'struct'}."</refname>\n";
+ print " <refname>" . $args{'type'} . " " . $args{'struct'} . "</refname>\n";
print " <refpurpose>\n";
print " ";
output_highlight ($args{'purpose'});
@@ -759,7 +759,7 @@ sub output_struct_xml(%) {
print "<refsynopsisdiv>\n";
print " <title>Synopsis</title>\n";
print " <programlisting>\n";
- print $args{'type'}." ".$args{'struct'}." {\n";
+ print $args{'type'} . " " . $args{'struct'} . " {\n";
foreach $parameter (@{$args{'parameterlist'}}) {
if ($parameter =~ /^#/) {
print "$parameter\n";
@@ -779,7 +779,7 @@ sub output_struct_xml(%) {
# bitfield
print " $1 $parameter$2;\n";
} else {
- print " ".$type." ".$parameter.";\n";
+ print " " . $type . " " . $parameter . ";\n";
}
}
print "};";
@@ -824,7 +824,7 @@ sub output_enum_xml(%) {
my $count;
my $id;
- $id = "API-enum-".$args{'enum'};
+ $id = "API-enum-" . $args{'enum'};
$id =~ s/[^A-Za-z0-9]/-/g;
print "<refentry id=\"$id\">\n";
@@ -834,12 +834,12 @@ sub output_enum_xml(%) {
print " <date>$man_date</date>\n";
print "</refentryinfo>\n";
print "<refmeta>\n";
- print " <refentrytitle><phrase>enum ".$args{'enum'}."</phrase></refentrytitle>\n";
+ print " <refentrytitle><phrase>enum " . $args{'enum'} . "</phrase></refentrytitle>\n";
print " <manvolnum>9</manvolnum>\n";
print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
print "</refmeta>\n";
print "<refnamediv>\n";
- print " <refname>enum ".$args{'enum'}."</refname>\n";
+ print " <refname>enum " . $args{'enum'} . "</refname>\n";
print " <refpurpose>\n";
print " ";
output_highlight ($args{'purpose'});
@@ -849,7 +849,7 @@ sub output_enum_xml(%) {
print "<refsynopsisdiv>\n";
print " <title>Synopsis</title>\n";
print " <programlisting>\n";
- print "enum ".$args{'enum'}." {\n";
+ print "enum " . $args{'enum'} . " {\n";
$count = 0;
foreach $parameter (@{$args{'parameterlist'}}) {
print " $parameter";
@@ -891,7 +891,7 @@ sub output_typedef_xml(%) {
my ($parameter, $section);
my $id;
- $id = "API-typedef-".$args{'typedef'};
+ $id = "API-typedef-" . $args{'typedef'};
$id =~ s/[^A-Za-z0-9]/-/g;
print "<refentry id=\"$id\">\n";
@@ -901,11 +901,11 @@ sub output_typedef_xml(%) {
print " <date>$man_date</date>\n";
print "</refentryinfo>\n";
print "<refmeta>\n";
- print " <refentrytitle><phrase>typedef ".$args{'typedef'}."</phrase></refentrytitle>\n";
+ print " <refentrytitle><phrase>typedef " . $args{'typedef'} . "</phrase></refentrytitle>\n";
print " <manvolnum>9</manvolnum>\n";
print "</refmeta>\n";
print "<refnamediv>\n";
- print " <refname>typedef ".$args{'typedef'}."</refname>\n";
+ print " <refname>typedef " . $args{'typedef'} . "</refname>\n";
print " <refpurpose>\n";
print " ";
output_highlight ($args{'purpose'});
@@ -914,7 +914,7 @@ sub output_typedef_xml(%) {
print "<refsynopsisdiv>\n";
print " <title>Synopsis</title>\n";
- print " <synopsis>typedef ".$args{'typedef'}.";</synopsis>\n";
+ print " <synopsis>typedef " . $args{'typedef'} . ";</synopsis>\n";
print "</refsynopsisdiv>\n";
output_section_xml(@_);
@@ -963,15 +963,15 @@ sub output_function_gnome {
my $count;
my $id;
- $id = $args{'module'}."-".$args{'function'};
+ $id = $args{'module'} . "-" . $args{'function'};
$id =~ s/[^A-Za-z0-9]/-/g;
print "<sect2>\n";
- print " <title id=\"$id\">".$args{'function'}."</title>\n";
+ print " <title id=\"$id\">" . $args{'function'} . "</title>\n";
print " <funcsynopsis>\n";
- print " <funcdef>".$args{'functiontype'}." ";
- print "<function>".$args{'function'}." ";
+ print " <funcdef>" . $args{'functiontype'} . " ";
+ print "<function>" . $args{'function'} . " ";
print "</function></funcdef>\n";
$count = 0;
@@ -983,7 +983,7 @@ sub output_function_gnome {
print " <paramdef>$1 <parameter>$parameter</parameter>)\n";
print " <funcparams>$2</funcparams></paramdef>\n";
} else {
- print " <paramdef>".$type;
+ print " <paramdef>" . $type;
print " <parameter>$parameter</parameter></paramdef>\n";
}
}
@@ -1043,13 +1043,13 @@ sub output_function_man(%) {
print ".TH \"$args{'function'}\" 9 \"$args{'function'}\" \"$man_date\" \"Kernel Hacker's Manual\" LINUX\n";
print ".SH NAME\n";
- print $args{'function'}." \\- ".$args{'purpose'}."\n";
+ print $args{'function'} . " \\- " . $args{'purpose'} . "\n";
print ".SH SYNOPSIS\n";
if ($args{'functiontype'} ne "") {
- print ".B \"".$args{'functiontype'}."\" ".$args{'function'}."\n";
+ print ".B \"" . $args{'functiontype'} . "\" " . $args{'function'} . "\n";
} else {
- print ".B \"".$args{'function'}."\n";
+ print ".B \"" . $args{'function'} . "\n";
}
$count = 0;
my $parenth = "(";
@@ -1061,10 +1061,10 @@ sub output_function_man(%) {
$type = $args{'parametertypes'}{$parameter};
if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
# pointer-to-function
- print ".BI \"".$parenth.$1."\" ".$parameter." \") (".$2.")".$post."\"\n";
+ print ".BI \"" . $parenth . $1 . "\" " . $parameter . " \") (" . $2 . ")" . $post . "\"\n";
} else {
$type =~ s/([^\*])$/$1 /;
- print ".BI \"".$parenth.$type."\" ".$parameter." \"".$post."\"\n";
+ print ".BI \"" . $parenth . $type . "\" " . $parameter . " \"" . $post . "\"\n";
}
$count++;
$parenth = "";
@@ -1075,7 +1075,7 @@ sub output_function_man(%) {
my $parameter_name = $parameter;
$parameter_name =~ s/\[.*//;
- print ".IP \"".$parameter."\" 12\n";
+ print ".IP \"" . $parameter . "\" 12\n";
output_highlight($args{'parameterdescs'}{$parameter_name});
}
foreach $section (@{$args{'sectionlist'}}) {
@@ -1094,10 +1094,10 @@ sub output_enum_man(%) {
print ".TH \"$args{'module'}\" 9 \"enum $args{'enum'}\" \"$man_date\" \"API Manual\" LINUX\n";
print ".SH NAME\n";
- print "enum ".$args{'enum'}." \\- ".$args{'purpose'}."\n";
+ print "enum " . $args{'enum'} . " \\- " . $args{'purpose'} . "\n";
print ".SH SYNOPSIS\n";
- print "enum ".$args{'enum'}." {\n";
+ print "enum " . $args{'enum'} . " {\n";
$count = 0;
foreach my $parameter (@{$args{'parameterlist'}}) {
print ".br\n.BI \" $parameter\"\n";
@@ -1116,7 +1116,7 @@ sub output_enum_man(%) {
my $parameter_name = $parameter;
$parameter_name =~ s/\[.*//;
- print ".IP \"".$parameter."\" 12\n";
+ print ".IP \"" . $parameter . "\" 12\n";
output_highlight($args{'parameterdescs'}{$parameter_name});
}
foreach $section (@{$args{'sectionlist'}}) {
@@ -1131,13 +1131,13 @@ sub output_struct_man(%) {
my %args = %{$_[0]};
my ($parameter, $section);
- print ".TH \"$args{'module'}\" 9 \"".$args{'type'}." ".$args{'struct'}."\" \"$man_date\" \"API Manual\" LINUX\n";
+ print ".TH \"$args{'module'}\" 9 \"" . $args{'type'} . " " . $args{'struct'} . "\" \"$man_date\" \"API Manual\" LINUX\n";
print ".SH NAME\n";
- print $args{'type'}." ".$args{'struct'}." \\- ".$args{'purpose'}."\n";
+ print $args{'type'} . " " . $args{'struct'} . " \\- " . $args{'purpose'} . "\n";
print ".SH SYNOPSIS\n";
- print $args{'type'}." ".$args{'struct'}." {\n.br\n";
+ print $args{'type'} . " " . $args{'struct'} . " {\n.br\n";
foreach my $parameter (@{$args{'parameterlist'}}) {
if ($parameter =~ /^#/) {
@@ -1151,13 +1151,13 @@ sub output_struct_man(%) {
$type = $args{'parametertypes'}{$parameter};
if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
# pointer-to-function
- print ".BI \" ".$1."\" ".$parameter." \") (".$2.")"."\"\n;\n";
+ print ".BI \" " . $1 . "\" " . $parameter . " \") (" . $2 . ")" . "\"\n;\n";
} elsif ($type =~ m/^(.*?)\s*(:.*)/) {
# bitfield
- print ".BI \" ".$1."\ \" ".$parameter.$2." \""."\"\n;\n";
+ print ".BI \" " . $1 . "\ \" " . $parameter . $2 . " \"" . "\"\n;\n";
} else {
$type =~ s/([^\*])$/$1 /;
- print ".BI \" ".$type."\" ".$parameter." \""."\"\n;\n";
+ print ".BI \" " . $type . "\" " . $parameter . " \"" . "\"\n;\n";
}
print "\n.br\n";
}
@@ -1171,7 +1171,7 @@ sub output_struct_man(%) {
$parameter_name =~ s/\[.*//;
($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
- print ".IP \"".$parameter."\" 12\n";
+ print ".IP \"" . $parameter . "\" 12\n";
output_highlight($args{'parameterdescs'}{$parameter_name});
}
foreach $section (@{$args{'sectionlist'}}) {
@@ -1189,7 +1189,7 @@ sub output_typedef_man(%) {
print ".TH \"$args{'module'}\" 9 \"$args{'typedef'}\" \"$man_date\" \"API Manual\" LINUX\n";
print ".SH NAME\n";
- print "typedef ".$args{'typedef'}." \\- ".$args{'purpose'}."\n";
+ print "typedef " . $args{'typedef'} . " \\- " . $args{'purpose'} . "\n";
foreach $section (@{$args{'sectionlist'}}) {
print ".SH \"$section\"\n";
@@ -1218,13 +1218,13 @@ sub output_function_text(%) {
my $start;
print "Name:\n\n";
- print $args{'function'}." - ".$args{'purpose'}."\n";
+ print $args{'function'} . " - " . $args{'purpose'} . "\n";
print "\nSynopsis:\n\n";
if ($args{'functiontype'} ne "") {
- $start = $args{'functiontype'}." ".$args{'function'}." (";
+ $start = $args{'functiontype'} . " " . $args{'function'} . " (";
} else {
- $start = $args{'function'}." (";
+ $start = $args{'function'} . " (";
}
print $start;
@@ -1233,9 +1233,9 @@ sub output_function_text(%) {
$type = $args{'parametertypes'}{$parameter};
if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
# pointer-to-function
- print $1.$parameter.") (".$2;
+ print $1 . $parameter . ") (" . $2;
} else {
- print $type." ".$parameter;
+ print $type . " " . $parameter;
}
if ($count != $#{$args{'parameterlist'}}) {
$count++;
@@ -1251,7 +1251,7 @@ sub output_function_text(%) {
my $parameter_name = $parameter;
$parameter_name =~ s/\[.*//;
- print $parameter."\n\t".$args{'parameterdescs'}{$parameter_name}."\n";
+ print $parameter . "\n\t" . $args{'parameterdescs'}{$parameter_name} . "\n";
}
output_section_text(@_);
}
@@ -1276,8 +1276,8 @@ sub output_enum_text(%) {
my $count;
print "Enum:\n\n";
- print "enum ".$args{'enum'}." - ".$args{'purpose'}."\n\n";
- print "enum ".$args{'enum'}." {\n";
+ print "enum " . $args{'enum'} . " - " . $args{'purpose'} . "\n\n";
+ print "enum " . $args{'enum'} . " {\n";
$count = 0;
foreach $parameter (@{$args{'parameterlist'}}) {
print "\t$parameter";
@@ -1292,7 +1292,7 @@ sub output_enum_text(%) {
print "Constants:\n\n";
foreach $parameter (@{$args{'parameterlist'}}) {
print "$parameter\n\t";
- print $args{'parameterdescs'}{$parameter}."\n";
+ print $args{'parameterdescs'}{$parameter} . "\n";
}
output_section_text(@_);
@@ -1305,7 +1305,7 @@ sub output_typedef_text(%) {
my $count;
print "Typedef:\n\n";
- print "typedef ".$args{'typedef'}." - ".$args{'purpose'}."\n";
+ print "typedef " . $args{'typedef'} . " - " . $args{'purpose'} . "\n";
output_section_text(@_);
}
@@ -1314,8 +1314,8 @@ sub output_struct_text(%) {
my %args = %{$_[0]};
my ($parameter);
- print $args{'type'}." ".$args{'struct'}." - ".$args{'purpose'}."\n\n";
- print $args{'type'}." ".$args{'struct'}." {\n";
+ print $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "\n\n";
+ print $args{'type'} . " " . $args{'struct'} . " {\n";
foreach $parameter (@{$args{'parameterlist'}}) {
if ($parameter =~ /^#/) {
print "$parameter\n";
@@ -1334,7 +1334,7 @@ sub output_struct_text(%) {
# bitfield
print "\t$1 $parameter$2;\n";
} else {
- print "\t".$type." ".$parameter.";\n";
+ print "\t" . $type . " " . $parameter . ";\n";
}
}
print "};\n\n";
@@ -1348,7 +1348,7 @@ sub output_struct_text(%) {
($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
print "$parameter\n\t";
- print $args{'parameterdescs'}{$parameter_name}."\n";
+ print $args{'parameterdescs'}{$parameter_name} . "\n";
}
print "\n";
output_section_text(@_);
@@ -1387,7 +1387,7 @@ sub output_declaration {
# generic output function - calls the right one based on current output mode.
sub output_blockhead {
no strict 'refs';
- my $func = "output_blockhead_".$output_mode;
+ my $func = "output_blockhead_" . $output_mode;
&$func(@_);
$section_counter++;
}
@@ -1398,7 +1398,7 @@ sub output_blockhead {
sub dump_declaration($$) {
no strict 'refs';
my ($prototype, $file) = @_;
- my $func = "dump_".$decl_type;
+ my $func = "dump_" . $decl_type;
&$func(@_);
}
@@ -1645,7 +1645,7 @@ sub push_parameter($$$) {
"or member '$param' not " .
"described in '$declaration_name'\n";
}
- print STDERR "Warning(${file}:$.):".
+ print STDERR "Warning(${file}:$.):" .
" No description found for parameter '$param'\n";
++$warnings;
}
@@ -1907,7 +1907,7 @@ sub process_state3_type($$) {
($2 eq '{') && $brcount++;
($2 eq '}') && $brcount--;
if (($2 eq ';') && ($brcount == 0)) {
- dump_declaration($prototype,$file);
+ dump_declaration($prototype, $file);
reset_state();
last;
}
@@ -2084,7 +2084,7 @@ sub process_file($) {
$section = $section_default;
$contents = "";
} else {
- $contents .= $1."\n";
+ $contents .= $1 . "\n";
}
} else {
# i dont know - bad line? ignore.
_
Patches currently in -mm which might be from randy.dunlap@xxxxxxxxxx are
linux-next.patch
input-drivers-input-xpadc-improve-xbox-360-wireless-support-and-add-sysfs-interface.patch
e1000e-make-e1000e-default-to-the-same-kconfig-setting-as-e1000.patch
qla2x-fix-printk-format-warnings.patch
readahead-add-blk_run_backing_dev-fix-fix-2.patch
hexdump-remove-the-trailing-space.patch
kmap_types-make-most-arches-use-generic-header-file.patch
irqs-add-irqf_sample_random-to-the-feature-removal-scheduletxt-deprecated-list.patch
lis3-use-input_polled_device-fix.patch
lis3-use-input_polled_device-fix-2.patch
cgroups-make-messages-more-readable.patch
rapidio-fix-kerneldoc-for-rio_mem_ops.patch
linuxpps-core-support.patch
reiser4-export-remove_from_page_cache-fix.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
