The patch titled usb: g_serial: append zlp when tx buffer becomes empty has been removed from the -mm tree. Its filename was usb-g_serial-append-zlp-when-tx-buffer-becomes-empty.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: usb: g_serial: append zlp when tx buffer becomes empty From: Daniel Glockner <dg@xxxxxxxxx> Some usb serial host drivers expect a short packet before they forward the data to the application. This is caused by them trying to read more than one packet at a time. So when the gadget sends an exact multiple of the maximum packet size, it should append a zero-length packet. Signed-off-by: Daniel Glockner <dg@xxxxxxxxx> Cc: David Brownell <david-b@xxxxxxxxxxx> Cc: Greg KH <greg@xxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/usb/gadget/u_serial.c | 1 + 1 file changed, 1 insertion(+) diff -puN drivers/usb/gadget/u_serial.c~usb-g_serial-append-zlp-when-tx-buffer-becomes-empty drivers/usb/gadget/u_serial.c --- a/drivers/usb/gadget/u_serial.c~usb-g_serial-append-zlp-when-tx-buffer-becomes-empty +++ a/drivers/usb/gadget/u_serial.c @@ -371,6 +371,7 @@ __acquires(&port->port_lock) req->length = len; list_del(&req->list); + req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0); pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n", port->port_num, len, *((u8 *)req->buf), _ Patches currently in -mm which might be from dg@xxxxxxxxx are linux-next.patch xtensa-variant-specific-code.patch xtensa-cache-inquiry-and-unaligned-cache-handling-functions.patch xtensa-s6000-dma-engine-support.patch xtensa-allow-platform-and-variant-to-initialize-own-irq-chips.patch xtensa-support-s6000-gpio-irqs-and-alternate-function-selection.patch s6gmac-xtensa-s6000-on-chip-ethernet-driver.patch xtensa-s6105-specific-configuration-for-s6gmac.patch xtensa-enable-s6gmac-in-s6105_defconfig.patch xtensa-add-m41t62-rtc-to-s6105-platform.patch xtensa-enable-m41t80-driver-in-s6105_defconfig.patch atmel-lcdc-fix-pixclock-upper-bound-detection.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html