The patch titled
s3c-fb: CPUFREQ frequency scaling support
has been added to the -mm tree. Its filename is
s3c-fb-cpufreq-frequency-scaling-support.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: s3c-fb: CPUFREQ frequency scaling support
From: Ben Dooks <ben@xxxxxxxxxxxx>
Add support for CPU frequency scaling in the S3C24XX video driver.
Signed-off-by: Simtec Linux Team <linux@xxxxxxxxxxxx>
Signed-off-by: Ben Dooks <ben@xxxxxxxxxxxx>
Cc: Dave Jones <davej@xxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/video/s3c2410fb.c | 67 ++++++++++++++++++++++++++++++++++--
drivers/video/s3c2410fb.h | 5 ++
2 files changed, 70 insertions(+), 2 deletions(-)
diff -puN drivers/video/s3c2410fb.c~s3c-fb-cpufreq-frequency-scaling-support drivers/video/s3c2410fb.c
--- a/drivers/video/s3c2410fb.c~s3c-fb-cpufreq-frequency-scaling-support
+++ a/drivers/video/s3c2410fb.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <asm/io.h>
#include <asm/div64.h>
@@ -89,7 +90,7 @@ static void s3c2410fb_set_lcdaddr(struct
static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi,
unsigned long pixclk)
{
- unsigned long clk = clk_get_rate(fbi->clk);
+ unsigned long clk = fbi->clk_rate;
unsigned long long div;
/* pixclk is in picoseconds, our clock is in Hz
@@ -758,6 +759,57 @@ static irqreturn_t s3c2410fb_irq(int irq
return IRQ_HANDLED;
}
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freqs = data;
+ struct s3c2410fb_info *info;
+ struct fb_info *fbinfo;
+ long delta_f;
+
+ info = container_of(nb, struct s3c2410fb_info, freq_transition);
+ fbinfo = platform_get_drvdata(to_platform_device(info->dev));
+
+ /* work out change, <0 for speed-up */
+ delta_f = info->clk_rate - clk_get_rate(info->clk);
+
+ if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
+ (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
+ info->clk_rate = clk_get_rate(info->clk);
+ s3c2410fb_activate_var(fbinfo);
+ }
+
+ return 0;
+}
+
+static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
+{
+ info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition;
+
+ return cpufreq_register_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
+{
+ cpufreq_unregister_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
+{
+ return 0;
+}
+
+static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
+{
+}
+#endif
+
+
static char driver_name[] = "s3c2410fb";
static int __init s3c24xxfb_probe(struct platform_device *pdev,
@@ -875,6 +927,8 @@ static int __init s3c24xxfb_probe(struct
msleep(1);
+ info->clk_rate = clk_get_rate(info->clk);
+
/* find maximum required memory size for display */
for (i = 0; i < mach_info->num_displays; i++) {
unsigned long smem_len = mach_info->displays[i].xres;
@@ -904,11 +958,17 @@ static int __init s3c24xxfb_probe(struct
s3c2410fb_check_var(&fbinfo->var, fbinfo);
+ ret = s3c2410fb_cpufreq_register(info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register cpufreq\n");
+ goto free_video_memory;
+ }
+
ret = register_framebuffer(fbinfo);
if (ret < 0) {
printk(KERN_ERR "Failed to register framebuffer device: %d\n",
ret);
- goto free_video_memory;
+ goto free_cpufreq;
}
/* create device files */
@@ -922,6 +982,8 @@ static int __init s3c24xxfb_probe(struct
return 0;
+ free_cpufreq:
+ s3c2410fb_cpufreq_deregister(info);
free_video_memory:
s3c2410fb_unmap_video_memory(fbinfo);
release_clock:
@@ -961,6 +1023,7 @@ static int s3c2410fb_remove(struct platf
int irq;
unregister_framebuffer(fbinfo);
+ s3c2410fb_cpufreq_deregister(info);
s3c2410fb_lcd_enable(info, 0);
msleep(1);
diff -puN drivers/video/s3c2410fb.h~s3c-fb-cpufreq-frequency-scaling-support drivers/video/s3c2410fb.h
--- a/drivers/video/s3c2410fb.h~s3c-fb-cpufreq-frequency-scaling-support
+++ a/drivers/video/s3c2410fb.h
@@ -29,8 +29,13 @@ struct s3c2410fb_info {
enum s3c_drv_type drv_type;
struct s3c2410fb_hw regs;
+ unsigned long clk_rate;
unsigned int palette_ready;
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
+
/* keep these registers in case we need to re-write palette */
u32 palette_buffer[256];
u32 pseudo_pal[16];
_
Patches currently in -mm which might be from ben@xxxxxxxxxxxx are
linux-next.patch
s3c-fb-cpufreq-frequency-scaling-support.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
