The patch titled
spi_mpc83xx: handle other Freescale processors
has been added to the -mm tree. Its filename is
spi_mpc83xx-handle-other-freescale-processors.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: spi_mpc83xx: handle other Freescale processors
From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
With this patch we'll able to select spi_mpc83xx driver on the MPC86xx
platforms. Let the driver depend on FSL_SOC, so we don't have to worry
about Kconfig anymore.
Also remove the "experimental" dependency, the driver has been tested to
work on a various hardware, and surely not experimental anymore.
Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxxxxx>
Cc: David Brownell <david-b@xxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/spi/Kconfig | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff -puN drivers/spi/Kconfig~spi_mpc83xx-handle-other-freescale-processors drivers/spi/Kconfig
--- a/drivers/spi/Kconfig~spi_mpc83xx-handle-other-freescale-processors
+++ a/drivers/spi/Kconfig
@@ -140,16 +140,14 @@ config SPI_MPC52xx_PSC
Controller in master SPI mode.
config SPI_MPC83xx
- tristate "Freescale MPC83xx/QUICC Engine SPI controller"
- depends on (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
+ tristate "Freescale MPC8xxx SPI controller"
+ depends on FSL_SOC
help
- This enables using the Freescale MPC83xx and QUICC Engine SPI
- controllers in master mode.
+ This enables using the Freescale MPC8xxx SPI controllers in master
+ mode.
- Note, this driver uniquely supports the SPI controller on the MPC83xx
- family of PowerPC processors, plus processors with QUICC Engine
- technology. This driver uses a simple set of shift registers for data
- (opposed to the CPM based descriptor model).
+ This driver uses a simple set of shift registers for data (opposed
+ to the CPM based descriptor model).
config SPI_OMAP_UWIRE
tristate "OMAP1 MicroWire"
_
Patches currently in -mm which might be from avorontsov@xxxxxxxxxxxxx are
linux-next.patch
mpc52xx_psc_spi-convert-to-cs_control-callback.patch
spi_mpc83xx-handle-other-freescale-processors.patch
spi_mpc83xx-quieten-down-the-requested-speed-is-too-low-message.patch
spi_mpc83xx-add-small-delay-after-asserting-chip-select-line.patch
powerpc-86xx-add-mmc-spi-support-for-mpc8610hpcd-boards.patch
spi_mpc83xx-fix-checkpatch-issues.patch
spi_mpc83xx-split-mpc83xx_spi_work-into-two-routines.patch
spi_mpc83xx-remove-dead-code.patch
spi_mpc83xx-rename-spi_83xxc-to-spi_8xxxc.patch
spi_mpc8xxx-s-83xx-8xxx-g.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
