The patch titled frv: insert PCI root bus resources for the MB93090 devel motherboard has been removed from the -mm tree. Its filename was frv-insert-pci-root-bus-resources-for-the-mb93090-devel-motherboard.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: frv: insert PCI root bus resources for the MB93090 devel motherboard From: David Howells <dhowells@xxxxxxxxxx> Insert PCI root bus resources for the FRV-based MB93090 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. Signed-off-by: David Howells <dhowells@xxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- arch/frv/mb93090-mb00/pci-vdk.c | 65 +++++++++++++++++++++++------- 1 file changed, 51 insertions(+), 14 deletions(-) diff -puN arch/frv/mb93090-mb00/pci-vdk.c~frv-insert-pci-root-bus-resources-for-the-mb93090-devel-motherboard arch/frv/mb93090-mb00/pci-vdk.c --- a/arch/frv/mb93090-mb00/pci-vdk.c~frv-insert-pci-root-bus-resources-for-the-mb93090-devel-motherboard +++ a/arch/frv/mb93090-mb00/pci-vdk.c @@ -31,6 +31,29 @@ struct pci_bus *__nongpreldata pci_root_ struct pci_ops *__nongpreldata pci_root_ops; /* + * The accessible PCI window does not cover the entire CPU address space, but + * there are devices we want to access outside of that window, so we need to + * insert specific PCI bus resources instead of using the platform-level bus + * resources directly for the PCI root bus. + * + * These are configured and inserted by pcibios_init() and are attached to the + * root bus by pcibios_fixup_bus(). + */ +static struct resource pci_ioport_resource = { + .name = "PCI IO", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_iomem_resource = { + .name = "PCI mem", + .start = 0, + .end = -1, + .flags = IORESOURCE_MEM, +}; + +/* * Functions for accessing PCI configuration space */ @@ -304,6 +327,12 @@ void __init pcibios_fixup_bus(struct pci #if 0 printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number); #endif + + if (bus->number == 0) { + bus->resource[0] = &pci_ioport_resource; + bus->resource[1] = &pci_iomem_resource; + } + pci_read_bridge_bases(bus); if (bus->number == 0) { @@ -350,28 +379,36 @@ int __init pcibios_init(void) /* enable PCI arbitration */ __reg_MB86943_pci_arbiter = MB86943_PCIARB_EN; - ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; - ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; - ioport_resource.end += ioport_resource.start; + pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; + pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; + pci_ioport_resource.end += pci_ioport_resource.start; printk("PCI IO window: %08llx-%08llx\n", - (unsigned long long) ioport_resource.start, - (unsigned long long) ioport_resource.end); - - iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; + (unsigned long long) pci_ioport_resource.start, + (unsigned long long) pci_ioport_resource.end); - /* Reserve somewhere to write to flush posted writes. */ - iomem_resource.start += 0x400; - - iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; - iomem_resource.end += iomem_resource.start; + pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; + pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; + pci_iomem_resource.end += pci_iomem_resource.start; + + /* Reserve somewhere to write to flush posted writes. This is used by + * __flush_PCI_writes() from asm/io.h to force the write FIFO in the + * CPU-PCI bridge to flush as this doesn't happen automatically when a + * read is performed on the MB93090 development kit motherboard. + */ + pci_iomem_resource.start += 0x400; printk("PCI MEM window: %08llx-%08llx\n", - (unsigned long long) iomem_resource.start, - (unsigned long long) iomem_resource.end); + (unsigned long long) pci_iomem_resource.start, + (unsigned long long) pci_iomem_resource.end); printk("PCI DMA memory: %08lx-%08lx\n", dma_coherent_mem_start, dma_coherent_mem_end); + if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) + panic("Unable to insert PCI IOMEM resource\n"); + if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) + panic("Unable to insert PCI IOPORT resource\n"); + if (!pci_probe) return -ENXIO; _ Patches currently in -mm which might be from dhowells@xxxxxxxxxx are rxrpc-fix-error-handling-for-rxrpc_alloc_connection.patch frv-duplicate-output_buffer-of-e03.patch slow_work_thread-should-do-the-exclusive-wait.patch rework-fix-is_single_threaded.patch kmap_types-make-most-arches-use-generic-header-file.patch flat-fix-data-sections-alignment.patch mutex-subsystem-synchro-test-module.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html