The patch titled cirrusfb: add Laguna additional overflow register has been removed from the -mm tree. Its filename was cirrusfb-add-laguna-additional-overflow-register.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: cirrusfb: add Laguna additional overflow register From: Krzysztof Helt <krzysztof.h1@xxxxx> Add additional overflow register setting for Laguna chips. Also, simplify some code in the cirrusfb_pan_display() and cirrusfb_blank(). Signed-off-by: Krzysztof Helt <krzysztof.h1@xxxxx> Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/video/cirrusfb.c | 68 ++++++++++++++++++++++--------------- include/video/cirrus.h | 1 2 files changed, 43 insertions(+), 26 deletions(-) diff -puN drivers/video/cirrusfb.c~cirrusfb-add-laguna-additional-overflow-register drivers/video/cirrusfb.c --- a/drivers/video/cirrusfb.c~cirrusfb-add-laguna-additional-overflow-register +++ a/drivers/video/cirrusfb.c @@ -1259,13 +1259,32 @@ static int cirrusfb_set_par_foo(struct f /* screen start addr #16-18, fastpagemode cycles */ vga_wcrt(regbase, CL_CRT1B, tmp); - if (cinfo->btype == BT_SD64 || - cinfo->btype == BT_PICASSO4 || - cinfo->btype == BT_ALPINE || - cinfo->btype == BT_GD5480) - /* screen start address bit 19 */ + /* screen start address bit 19 */ + if (cirrusfb_board_info[cinfo->btype].scrn_start_bit19) vga_wcrt(regbase, CL_CRT1D, 0x00); + if (cinfo->btype == BT_LAGUNA || + cinfo->btype == BT_GD5480) { + + tmp = 0; + if ((htotal + 5) & 256) + tmp |= 128; + if (hdispend & 256) + tmp |= 64; + if (hsyncstart & 256) + tmp |= 48; + if (vtotal & 1024) + tmp |= 8; + if (vdispend & 1024) + tmp |= 4; + if (vsyncstart & 1024) + tmp |= 3; + + vga_wcrt(regbase, CL_CRT1E, tmp); + dev_dbg(info->device, "CRT1e: %d\n", tmp); + } + + /* text cursor location high */ vga_wcrt(regbase, VGA_CRTC_CURSOR_HI, 0); /* text cursor location low */ @@ -1383,7 +1402,7 @@ static int cirrusfb_pan_display(struct f int xoffset = 0; int yoffset = 0; unsigned long base; - unsigned char tmp = 0, tmp2 = 0, xpix; + unsigned char tmp, xpix; struct cirrusfb_info *cinfo = info->par; dev_dbg(info->device, @@ -1418,6 +1437,8 @@ static int cirrusfb_pan_display(struct f vga_wcrt(cinfo->regbase, VGA_CRTC_START_HI, (unsigned char) (base >> 8)); + /* 0xf2 is %11110010, exclude tmp bits */ + tmp = vga_rcrt(cinfo->regbase, CL_CRT1B) & 0xf2; /* construct bits 16, 17 and 18 of screen start address */ if (base & 0x10000) tmp |= 0x01; @@ -1426,9 +1447,7 @@ static int cirrusfb_pan_display(struct f if (base & 0x40000) tmp |= 0x08; - /* 0xf2 is %11110010, exclude tmp bits */ - tmp2 = (vga_rcrt(cinfo->regbase, CL_CRT1B) & 0xf2) | tmp; - vga_wcrt(cinfo->regbase, CL_CRT1B, tmp2); + vga_wcrt(cinfo->regbase, CL_CRT1B, tmp); /* construct bit 19 of screen start address */ if (cirrusfb_board_info[cinfo->btype].scrn_start_bit19) @@ -1473,47 +1492,44 @@ static int cirrusfb_blank(int blank_mode /* Undo current */ if (current_mode == FB_BLANK_NORMAL || - current_mode == FB_BLANK_UNBLANK) { - /* unblank the screen */ - val = vga_rseq(cinfo->regbase, VGA_SEQ_CLOCK_MODE); + current_mode == FB_BLANK_UNBLANK) /* clear "FullBandwidth" bit */ - vga_wseq(cinfo->regbase, VGA_SEQ_CLOCK_MODE, val & 0xdf); - /* and undo VESA suspend trickery */ - vga_wgfx(cinfo->regbase, CL_GRE, 0x00); - } - - /* set new */ - if (blank_mode > FB_BLANK_NORMAL) { - /* blank the screen */ - val = vga_rseq(cinfo->regbase, VGA_SEQ_CLOCK_MODE); + val = 0; + else /* set "FullBandwidth" bit */ - vga_wseq(cinfo->regbase, VGA_SEQ_CLOCK_MODE, val | 0x20); - } + val = 0x20; + + val |= vga_rseq(cinfo->regbase, VGA_SEQ_CLOCK_MODE) & 0xdf; + vga_wseq(cinfo->regbase, VGA_SEQ_CLOCK_MODE, val); switch (blank_mode) { case FB_BLANK_UNBLANK: case FB_BLANK_NORMAL: + val = 0x00; break; case FB_BLANK_VSYNC_SUSPEND: - vga_wgfx(cinfo->regbase, CL_GRE, 0x04); + val = 0x04; break; case FB_BLANK_HSYNC_SUSPEND: - vga_wgfx(cinfo->regbase, CL_GRE, 0x02); + val = 0x02; break; case FB_BLANK_POWERDOWN: - vga_wgfx(cinfo->regbase, CL_GRE, 0x06); + val = 0x06; break; default: dev_dbg(info->device, "EXIT, returning 1\n"); return 1; } + vga_wgfx(cinfo->regbase, CL_GRE, val); + cinfo->blank_mode = blank_mode; dev_dbg(info->device, "EXIT, returning 0\n"); /* Let fbcon do a soft blank for us */ return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0; } + /**** END Hardware specific Routines **************************************/ /****************************************************************************/ /**** BEGIN Internal Routines ***********************************************/ diff -puN include/video/cirrus.h~cirrusfb-add-laguna-additional-overflow-register include/video/cirrus.h --- a/include/video/cirrus.h~cirrusfb-add-laguna-additional-overflow-register +++ a/include/video/cirrus.h @@ -71,6 +71,7 @@ #define CL_CRT1B 0x1b /* Extended Display Controls */ #define CL_CRT1C 0x1c /* Sync adjust and genlock register */ #define CL_CRT1D 0x1d /* Overlay Extended Control register */ +#define CL_CRT1E 0x1e /* Another overflow register */ #define CL_CRT25 0x25 /* Part Status Register */ #define CL_CRT27 0x27 /* ID Register */ #define CL_CRT51 0x51 /* P4 disable "flicker fixer" */ _ Patches currently in -mm which might be from krzysztof.h1@xxxxx are origin.patch linux-next.patch tdfxfb-move-i2c-functionality-into-the-tdfxfb.patch tdfxfb-make-use-of-ddc-information-about-connected-monitor.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html