The patch titled hp_accel: axis conversion for hp compaq 8710w has been removed from the -mm tree. Its filename was hp_accel-axis-conversion-for-hp-compaq-8710w.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: hp_accel: axis conversion for hp compaq 8710w From: Luca Cappa <lcappa@xxxxxxxxx> I have a laptop HP Compaq 8710W, I compiled into my kernel the LIS3LV02DL and HP_ACCEL module drivers. While loading it cannot recognize the laptop model, so i am sending the necessary information to update the database of axis orientations. >When the laptop is horizontal the position reported is about 0 for X and Y >and a positive value for Z Yes, it is about 0,0,1000, the actual reading says: (-17,-26,1018); > If the left side is elevated, X increases (becomes positive) Yes, X goes toward to positive 1000. >If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) No, Y goes toward to positive 1000. >If the laptop is put upside-down, Z becomes negative Yes, the laptop on a table Z gives 1000, and if upsidedown the Z reads -1000. So in few words the Y axis is inverted. Cc: Eric Piel <eric.piel@xxxxxxxxxxxxxxxx> Signed-off-by: Pavel Machek <pavel@xxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/hwmon/hp_accel.c | 1 + 1 file changed, 1 insertion(+) diff -puN drivers/hwmon/hp_accel.c~hp_accel-axis-conversion-for-hp-compaq-8710w drivers/hwmon/hp_accel.c --- a/drivers/hwmon/hp_accel.c~hp_accel-axis-conversion-for-hp-compaq-8710w +++ a/drivers/hwmon/hp_accel.c @@ -203,6 +203,7 @@ static struct dmi_system_id lis3lv02d_dm BOARD_NAME, "3600", y_inverted), AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted), + AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted), { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" _ Patches currently in -mm which might be from lcappa@xxxxxxxxx are origin.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html