The patch titled proc tty: switch stallion to ->proc_fops has been removed from the -mm tree. Its filename was proc-tty-switch-stallion-to-proc_fops.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: proc tty: switch stallion to ->proc_fops From: Alexey Dobriyan <adobriyan@xxxxxxxxx> Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx> Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/char/stallion.c | 124 +++++++++++++++----------------------- 1 file changed, 49 insertions(+), 75 deletions(-) diff -puN drivers/char/stallion.c~proc-tty-switch-stallion-to-proc_fops drivers/char/stallion.c --- a/drivers/char/stallion.c~proc-tty-switch-stallion-to-proc_fops +++ a/drivers/char/stallion.c @@ -32,6 +32,7 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> +#include <linux/seq_file.h> #include <linux/cd1400.h> #include <linux/sc26198.h> #include <linux/comstats.h> @@ -1379,52 +1380,47 @@ static void stl_sendxchar(struct tty_str stl_putchar(tty, ch); } -/*****************************************************************************/ - -#define MAXLINE 80 - -/* - * Format info for a specified port. The line is deliberately limited - * to 80 characters. (If it is too long it will be truncated, if too - * short then padded with spaces). - */ - -static int stl_portinfo(struct stlport *portp, int portnr, char *pos) +static void stl_portinfo(struct seq_file *m, struct stlport *portp, int portnr) { - char *sp; - int sigs, cnt; + int sigs; + char sep; - sp = pos; - sp += sprintf(sp, "%d: uart:%s tx:%d rx:%d", + seq_printf(m, "%d: uart:%s tx:%d rx:%d", portnr, (portp->hwid == 1) ? "SC26198" : "CD1400", (int) portp->stats.txtotal, (int) portp->stats.rxtotal); if (portp->stats.rxframing) - sp += sprintf(sp, " fe:%d", (int) portp->stats.rxframing); + seq_printf(m, " fe:%d", (int) portp->stats.rxframing); if (portp->stats.rxparity) - sp += sprintf(sp, " pe:%d", (int) portp->stats.rxparity); + seq_printf(m, " pe:%d", (int) portp->stats.rxparity); if (portp->stats.rxbreaks) - sp += sprintf(sp, " brk:%d", (int) portp->stats.rxbreaks); + seq_printf(m, " brk:%d", (int) portp->stats.rxbreaks); if (portp->stats.rxoverrun) - sp += sprintf(sp, " oe:%d", (int) portp->stats.rxoverrun); + seq_printf(m, " oe:%d", (int) portp->stats.rxoverrun); sigs = stl_getsignals(portp); - cnt = sprintf(sp, "%s%s%s%s%s ", - (sigs & TIOCM_RTS) ? "|RTS" : "", - (sigs & TIOCM_CTS) ? "|CTS" : "", - (sigs & TIOCM_DTR) ? "|DTR" : "", - (sigs & TIOCM_CD) ? "|DCD" : "", - (sigs & TIOCM_DSR) ? "|DSR" : ""); - *sp = ' '; - sp += cnt; - - for (cnt = sp - pos; cnt < (MAXLINE - 1); cnt++) - *sp++ = ' '; - if (cnt >= MAXLINE) - pos[(MAXLINE - 2)] = '+'; - pos[(MAXLINE - 1)] = '\n'; - - return MAXLINE; + sep = ' '; + if (sigs & TIOCM_RTS) { + seq_printf(m, "%c%s", sep, "RTS"); + sep = '|'; + } + if (sigs & TIOCM_CTS) { + seq_printf(m, "%c%s", sep, "CTS"); + sep = '|'; + } + if (sigs & TIOCM_DTR) { + seq_printf(m, "%c%s", sep, "DTR"); + sep = '|'; + } + if (sigs & TIOCM_CD) { + seq_printf(m, "%c%s", sep, "DCD"); + sep = '|'; + } + if (sigs & TIOCM_DSR) { + seq_printf(m, "%c%s", sep, "DSR"); + sep = '|'; + } + seq_putc(m, '\n'); } /*****************************************************************************/ @@ -1433,30 +1429,17 @@ static int stl_portinfo(struct stlport * * Port info, read from the /proc file system. */ -static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data) +static int stl_proc_show(struct seq_file *m, void *v) { struct stlbrd *brdp; struct stlpanel *panelp; struct stlport *portp; unsigned int brdnr, panelnr, portnr; - int totalport, curoff, maxoff; - char *pos; - - pr_debug("stl_readproc(page=%p,start=%p,off=%lx,count=%d,eof=%p," - "data=%p\n", page, start, off, count, eof, data); + int totalport; - pos = page; totalport = 0; - curoff = 0; - if (off == 0) { - pos += sprintf(pos, "%s: version %s", stl_drvtitle, - stl_drvversion); - while (pos < (page + MAXLINE - 1)) - *pos++ = ' '; - *pos++ = '\n'; - } - curoff = MAXLINE; + seq_printf(m, "%s: version %s\n", stl_drvtitle, stl_drvversion); /* * We scan through for each board, panel and port. The offset is @@ -1469,46 +1452,37 @@ static int stl_readproc(char *page, char if (brdp->state == 0) continue; - maxoff = curoff + (brdp->nrports * MAXLINE); - if (off >= maxoff) { - curoff = maxoff; - continue; - } - totalport = brdnr * STL_MAXPORTS; for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) { panelp = brdp->panels[panelnr]; if (panelp == NULL) continue; - maxoff = curoff + (panelp->nrports * MAXLINE); - if (off >= maxoff) { - curoff = maxoff; - totalport += panelp->nrports; - continue; - } - for (portnr = 0; portnr < panelp->nrports; portnr++, totalport++) { portp = panelp->ports[portnr]; if (portp == NULL) continue; - if (off >= (curoff += MAXLINE)) - continue; - if ((pos - page + MAXLINE) > count) - goto stl_readdone; - pos += stl_portinfo(portp, totalport, pos); + stl_portinfo(m, portp, totalport); } } } + return 0; +} - *eof = 1; - -stl_readdone: - *start = page; - return pos - page; +static int stl_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, stl_proc_show, NULL); } +static const struct file_operations stl_proc_fops = { + .owner = THIS_MODULE, + .open = stl_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /*****************************************************************************/ /* @@ -2566,9 +2540,9 @@ static const struct tty_operations stl_o .break_ctl = stl_breakctl, .wait_until_sent = stl_waituntilsent, .send_xchar = stl_sendxchar, - .read_proc = stl_readproc, .tiocmget = stl_tiocmget, .tiocmset = stl_tiocmset, + .proc_fops = &stl_proc_fops, }; static const struct tty_port_operations stl_port_ops = { _ Patches currently in -mm which might be from adobriyan@xxxxxxxxx are origin.patch linux-next.patch sysctl-dont-take-the-use-count-of-multiple-heads-at-a-time.patch sysctl-lockdep-support-for-sysctl-reference-counting.patch simplify-copy_thread.patch simplify-copy_thread-checkpatch-fixes.patch softirq-introduce-statistics-for-softirq.patch proc-export-statistics-for-softirq-to-proc.patch proc-export-statistics-for-softirq-to-proc-fix.patch proc-update-document-for-proc-softirqs-and-proc-stat.patch proc_sysctl-use-config_proc_sysctl-around-ipc-and-utsname-proc_handlers.patch sysctl-fix-suid_dumpable-and-lease-break-time-sysctls.patch namespaces-move-proc_net_get_sb-to-a-generic-fs-superc-helper.patch namespaces-move-proc_net_get_sb-to-a-generic-fs-superc-helper-fix.patch namespaces-mqueue-ns-move-mqueue_mnt-into-struct-ipc_namespace.patch namespaces-ipc-namespaces-implement-support-for-posix-msqueues.patch namespaces-ipc-namespaces-implement-support-for-posix-msqueues-initialize-init_ipc_nscount-to-1.patch namespaces-mqueue-namespace-adapt-sysctl.patch namespaces-mqueue-namespace-adapt-sysctl-update.patch namespaces-mqueue-namespace-adapt-sysctl-update-fix.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html