The patch titled
lis3: SPI transport layer
has been added to the -mm tree. Its filename is
lis3-spi-transport-layer.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: lis3: SPI transport layer
From: Daniel Mack <daniel@xxxxxxxx>
Make use of the new abstraction layer and add a new transport layer for
spi. Works fine on a PXA based board.
Signed-off-by: Daniel Mack <daniel@xxxxxxxx>
Acked-by: Pavel Machek <pavel@xxxxxx>
Acked-by: Eric Piel <eric.piel@xxxxxxxxxxxxxxxx>
Cc: David Brownell <david-b@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/hwmon/Kconfig | 16 ++++
drivers/hwmon/Makefile | 1
drivers/hwmon/lis3lv02d_spi.c | 114 ++++++++++++++++++++++++++++++++
3 files changed, 131 insertions(+)
diff -puN drivers/hwmon/Kconfig~lis3-spi-transport-layer drivers/hwmon/Kconfig
--- a/drivers/hwmon/Kconfig~lis3-spi-transport-layer
+++ a/drivers/hwmon/Kconfig
@@ -932,6 +932,22 @@ config SENSORS_LIS3LV02D
Say Y here if you have an applicable laptop and want to experience
the awesome power of lis3lv02d.
+config SENSORS_LIS3_SPI
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
+ depends on !ACPI && SPI_MASTER && INPUT
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer connected
+ via SPI. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for the SPI transport
+ is called lis3lv02d_spi.
+
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on INPUT && X86
diff -puN drivers/hwmon/Makefile~lis3-spi-transport-layer drivers/hwmon/Makefile
--- a/drivers/hwmon/Makefile~lis3-spi-transport-layer
+++ a/drivers/hwmon/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
+obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
obj-$(CONFIG_SENSORS_LM70) += lm70.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
diff -puN /dev/null drivers/hwmon/lis3lv02d_spi.c
--- /dev/null
+++ a/drivers/hwmon/lis3lv02d_spi.c
@@ -0,0 +1,114 @@
+/*
+ * lis3lv02d_spi - SPI glue layer for lis3lv02d
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@xxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+
+#include "lis3lv02d.h"
+
+#define DRV_NAME "lis3lv02d_spi"
+#define LIS3_SPI_READ 0x80
+
+static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v)
+{
+ struct spi_device *spi = lis3->bus_priv;
+ int ret = spi_w8r8(spi, reg | LIS3_SPI_READ);
+ if (ret < 0)
+ return -EINVAL;
+
+ *v = (u8) ret;
+ return 0;
+}
+
+static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val)
+{
+ u8 tmp[2] = { reg, val };
+ struct spi_device *spi = lis3->bus_priv;
+ return spi_write(spi, tmp, sizeof(tmp));
+}
+
+static int lis3_spi_init(struct lis3lv02d *lis3)
+{
+ u8 reg;
+ int ret;
+
+ /* power up the device */
+ ret = lis3->read(lis3, CTRL_REG1, ®);
+ if (ret < 0)
+ return ret;
+
+ reg |= CTRL1_PD0;
+ return lis3->write(lis3, CTRL_REG1, reg);
+}
+
+static struct axis_conversion lis3lv02d_axis_normal = { 1, 2, 3 };
+
+static int __devinit lis302dl_spi_probe(struct spi_device *spi)
+{
+ int ret;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_0;
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ lis3_dev.bus_priv = spi;
+ lis3_dev.init = lis3_spi_init;
+ lis3_dev.read = lis3_spi_read;
+ lis3_dev.write = lis3_spi_write;
+ lis3_dev.irq = spi->irq;
+ lis3_dev.ac = lis3lv02d_axis_normal;
+ spi_set_drvdata(spi, &lis3_dev);
+
+ ret = lis3lv02d_init_device(&lis3_dev);
+ return ret;
+}
+
+static int __devexit lis302dl_spi_remove(struct spi_device *spi)
+{
+ struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+ lis3lv02d_joystick_disable();
+ lis3lv02d_poweroff(lis3);
+ return 0;
+}
+
+static struct spi_driver lis302dl_spi_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = lis302dl_spi_probe,
+ .remove = __devexit_p(lis302dl_spi_remove),
+};
+
+static int __init lis302dl_init(void)
+{
+ return spi_register_driver(&lis302dl_spi_driver);
+}
+
+static void __exit lis302dl_exit(void)
+{
+ spi_unregister_driver(&lis302dl_spi_driver);
+}
+
+module_init(lis302dl_init);
+module_exit(lis302dl_exit);
+
+MODULE_AUTHOR("Daniel Mack <daniel@xxxxxxxx>");
+MODULE_DESCRIPTION("lis3lv02d SPI glue layer");
+MODULE_LICENSE("GPL");
+
_
Patches currently in -mm which might be from daniel@xxxxxxxx are
origin.patch
linux-next.patch
drivers-misc-isl29003c-driver-for-the-isl29003-ambient-light-sensor.patch
drivers-misc-isl29003c-driver-for-the-isl29003-ambient-light-sensor-fix.patch
hp_accel-add-two-more-axis-information.patch
lis3-reorder-functions-to-make-forward-decl-obsolete.patch
lis3-solve-dependency-between-core-and-acpi.patch
lis3-spi-transport-layer.patch
w1-coding-style-cleanups-in-w1_ioc.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
