The patch titled regulator: implement list_voltage() for WM8400 DCDCs and LDOs has been added to the -mm tree. Its filename is regulator-implement-list_voltage-for-wm8400-dcdcs-and-ldos.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: regulator: implement list_voltage() for WM8400 DCDCs and LDOs From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx> All DCDCs and LDOs are identical. Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx> Cc: Liam Girdwood <lrg@xxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/regulator/wm8400-regulator.c | 34 ++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 4 deletions(-) diff -puN drivers/regulator/wm8400-regulator.c~regulator-implement-list_voltage-for-wm8400-dcdcs-and-ldos drivers/regulator/wm8400-regulator.c --- a/drivers/regulator/wm8400-regulator.c~regulator-implement-list_voltage-for-wm8400-dcdcs-and-ldos +++ a/drivers/regulator/wm8400-regulator.c @@ -43,6 +43,18 @@ static int wm8400_ldo_disable(struct reg WM8400_LDO1_ENA, 0); } +static int wm8400_ldo_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + if (selector > WM8400_LDO1_VSEL_MASK) + return -EINVAL; + + if (selector < 15) + return 900000 + (selector * 50000); + else + return 1600000 + ((selector - 14) * 100000); +} + static int wm8400_ldo_get_voltage(struct regulator_dev *dev) { struct wm8400 *wm8400 = rdev_get_drvdata(dev); @@ -51,10 +63,7 @@ static int wm8400_ldo_get_voltage(struct val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); val &= WM8400_LDO1_VSEL_MASK; - if (val < 15) - return 900000 + (val * 50000); - else - return 1600000 + ((val - 14) * 100000); + return wm8400_ldo_list_voltage(dev, val); } static int wm8400_ldo_set_voltage(struct regulator_dev *dev, @@ -92,6 +101,7 @@ static struct regulator_ops wm8400_ldo_o .is_enabled = wm8400_ldo_is_enabled, .enable = wm8400_ldo_enable, .disable = wm8400_ldo_disable, + .list_voltage = wm8400_ldo_list_voltage, .get_voltage = wm8400_ldo_get_voltage, .set_voltage = wm8400_ldo_set_voltage, }; @@ -124,6 +134,15 @@ static int wm8400_dcdc_disable(struct re WM8400_DC1_ENA, 0); } +static int wm8400_dcdc_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + if (selector > WM8400_DC1_VSEL_MASK) + return -EINVAL; + + return 850000 + (selector * 25000); +} + static int wm8400_dcdc_get_voltage(struct regulator_dev *dev) { struct wm8400 *wm8400 = rdev_get_drvdata(dev); @@ -237,6 +256,7 @@ static struct regulator_ops wm8400_dcdc_ .is_enabled = wm8400_dcdc_is_enabled, .enable = wm8400_dcdc_enable, .disable = wm8400_dcdc_disable, + .list_voltage = wm8400_dcdc_list_voltage, .get_voltage = wm8400_dcdc_get_voltage, .set_voltage = wm8400_dcdc_set_voltage, .get_mode = wm8400_dcdc_get_mode, @@ -249,6 +269,7 @@ static struct regulator_desc regulators[ .name = "LDO1", .id = WM8400_LDO1, .ops = &wm8400_ldo_ops, + .n_voltages = WM8400_LDO1_VSEL_MASK + 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -256,6 +277,7 @@ static struct regulator_desc regulators[ .name = "LDO2", .id = WM8400_LDO2, .ops = &wm8400_ldo_ops, + .n_voltages = WM8400_LDO2_VSEL_MASK + 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -263,6 +285,7 @@ static struct regulator_desc regulators[ .name = "LDO3", .id = WM8400_LDO3, .ops = &wm8400_ldo_ops, + .n_voltages = WM8400_LDO3_VSEL_MASK + 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -270,6 +293,7 @@ static struct regulator_desc regulators[ .name = "LDO4", .id = WM8400_LDO4, .ops = &wm8400_ldo_ops, + .n_voltages = WM8400_LDO4_VSEL_MASK + 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -277,6 +301,7 @@ static struct regulator_desc regulators[ .name = "DCDC1", .id = WM8400_DCDC1, .ops = &wm8400_dcdc_ops, + .n_voltages = WM8400_DC1_VSEL_MASK + 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -284,6 +309,7 @@ static struct regulator_desc regulators[ .name = "DCDC2", .id = WM8400_DCDC2, .ops = &wm8400_dcdc_ops, + .n_voltages = WM8400_DC2_VSEL_MASK + 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, _ Patches currently in -mm which might be from broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx are linux-next.patch input-add-wm97xx-accelerated-driver-for-avr32-at32ap700x-microprocessors.patch mfd-use-the-value-of-the-final-spin-when-reading-the-auxadc.patch regulator-implement-list_voltage-for-wm8400-dcdcs-and-ldos.patch regulator-dont-warn-on-omitted-voltage-constraints.patch mfd-add-support-for-wm8351-revision-b.patch rtc-convert-wm8350-use-new-alarm-and-update-operations.patch rtc-wm8350-retries-will-reach-1.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html