The patch titled atyfb: properly save PCI state before changing PCI PM level has been removed from the -mm tree. Its filename was atyfb-properly-save-pci-state-before-changing-pci-pm-level.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: atyfb: properly save PCI state before changing PCI PM level From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> This fixes atyfb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also slightly cleaned up the code that checks whether we are running on a PowerMac to do a runtime check instead of a compile check only, and replaced a deprecated number with the proper symbolic constant. Finally, I removed the useless switch to D0 from resume since the core does it for us. Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> Cc: "Rafael J. Wysocki" <rjw@xxxxxxx> Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Cc: Krzysztof Halasa <khc@xxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/video/aty/atyfb_base.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff -puN drivers/video/aty/atyfb_base.c~atyfb-properly-save-pci-state-before-changing-pci-pm-level drivers/video/aty/atyfb_base.c --- a/drivers/video/aty/atyfb_base.c~atyfb-properly-save-pci-state-before-changing-pci-pm-level +++ a/drivers/video/aty/atyfb_base.c @@ -1978,7 +1978,7 @@ static int aty_power_mgmt(int sleep, str return timeout ? 0 : -EIO; } -#endif +#endif /* CONFIG_PPC_PMAC */ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -2002,9 +2002,15 @@ static int atyfb_pci_suspend(struct pci_ par->asleep = 1; par->lock_blank = 1; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + #ifdef CONFIG_PPC_PMAC /* Set chip to "suspend" mode */ - if (aty_power_mgmt(1, par)) { + if (machine_is(powermac) && aty_power_mgmt(1, par)) { par->asleep = 0; par->lock_blank = 0; atyfb_blank(FB_BLANK_UNBLANK, info); @@ -2047,11 +2053,15 @@ static int atyfb_pci_resume(struct pci_d acquire_console_sem(); + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + #ifdef CONFIG_PPC_PMAC - if (pdev->dev.power.power_state.event == 2) + if (machine_is(powermac) && + pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) aty_power_mgmt(0, par); -#else - pci_set_power_state(pdev, PCI_D0); #endif aty_resume_chip(info); _ Patches currently in -mm which might be from benh@xxxxxxxxxxxxxxxxxxx are linux-next.patch arch-powerpc-eliminate-double-sizeof.patch arch-powerpc-eliminate-double-sizeof-checkpatch-fixes.patch aty128fb-properly-save-pci-state-before-changing-pci-pm-level-fix.patch powerpc-fix-code-for-reserved-memory-spanning-across-nodes.patch page_fault-retry-with-nopage_retry.patch page_fault-retry-with-nopage_retry-fix.patch spi_mpc83xx-fix-sparse-warnings.patch spi_mpc83xx-rework-chip-selects-handling.patch spi_mpc83xx-add-of-platform-driver-bindings.patch powerpc-add-mmc-spi-slot-bindings.patch powerpc-83xx-add-mmc-spi-support-via-the-device-tree-for-mpc8323e-rdb.patch powerpc-fsl_soc-isolate-legacy-fsl_spi-support-to-mpc832x_rdb-boards.patch atyfb-fix-header-file-trailing-whitespace.patch edac-new-ppc4xx-driver-module.patch edac-new-ppc4xx-driver-module-update.patch edac-new-ppc4xx-driver-module-update-checkpatch-fixes.patch edac-new-ppc4xx-driver-module-update-checkpatch-fixes-checkpatch-fixes.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html