The patch titled cirrusfb: convert printks to dev_foo has been added to the -mm tree. Its filename is cirrusfb-convert-printks-to-dev_foo.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: cirrusfb: convert printks to dev_foo From: Krzysztof Helt <krzysztof.h1@xxxxxxxxx> Convert all printks to dev_dbg, dev_info or dev_err. Kill some excessive debug information and code in the process. Signed-off-by: Krzysztof Helt <krzysztof.h1@xxxxxxxxx> Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/video/cirrusfb.c | 449 ++++++++++++------------------------- 1 file changed, 156 insertions(+), 293 deletions(-) diff -puN drivers/video/cirrusfb.c~cirrusfb-convert-printks-to-dev_foo drivers/video/cirrusfb.c --- a/drivers/video/cirrusfb.c~cirrusfb-convert-printks-to-dev_foo +++ a/drivers/video/cirrusfb.c @@ -34,8 +34,6 @@ * */ -#define CIRRUSFB_VERSION "2.0-pre2" - #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> @@ -72,20 +70,9 @@ * */ -/* enable debug output? */ -/* #define CIRRUSFB_DEBUG 1 */ - /* disable runtime assertions? */ /* #define CIRRUSFB_NDEBUG */ -/* debug output */ -#ifdef CIRRUSFB_DEBUG -#define DPRINTK(fmt, args...) \ - printk(KERN_DEBUG "%s: " fmt, __func__ , ## args) -#else -#define DPRINTK(fmt, args...) -#endif - /* debugging assertions */ #ifndef CIRRUSFB_NDEBUG #define assert(expr) \ @@ -426,11 +413,10 @@ static void cirrusfb_RectFill(u8 __iomem static void bestclock(long freq, int *nom, int *den, int *div); #ifdef CIRRUSFB_DEBUG -static void cirrusfb_dump(void); -static void cirrusfb_dbg_reg_dump(caddr_t regbase); -static void cirrusfb_dbg_print_regs(caddr_t regbase, +static void cirrusfb_dbg_reg_dump(struct fb_info *info, caddr_t regbase); +static void cirrusfb_dbg_print_regs(struct fb_info *info, + caddr_t regbase, enum cirrusfb_dbg_reg_class reg_class, ...); -static void cirrusfb_dbg_print_byte(const char *name, unsigned char val); #endif /* CIRRUSFB_DEBUG */ /*** END PROTOTYPES ********************************************************/ @@ -460,23 +446,24 @@ static int cirrusfb_release(struct fb_in /**** BEGIN Hardware specific Routines **************************************/ /* Check if the MCLK is not a better clock source */ -static int cirrusfb_check_mclk(struct cirrusfb_info *cinfo, long freq) +static int cirrusfb_check_mclk(struct fb_info *info, long freq) { + struct cirrusfb_info *cinfo = info->par; long mclk = vga_rseq(cinfo->regbase, CL_SEQR1F) & 0x3f; /* Read MCLK value */ mclk = (14318 * mclk) >> 3; - DPRINTK("Read MCLK of %ld kHz\n", mclk); + dev_dbg(info->device, "Read MCLK of %ld kHz\n", mclk); /* Determine if we should use MCLK instead of VCLK, and if so, what we * should divide it by to get VCLK */ if (abs(freq - mclk) < 250) { - DPRINTK("Using VCLK = MCLK\n"); + dev_dbg(info->device, "Using VCLK = MCLK\n"); return 1; } else if (abs(freq - (mclk / 2)) < 250) { - DPRINTK("Using VCLK = MCLK/2\n"); + dev_dbg(info->device, "Using VCLK = MCLK/2\n"); return 2; } @@ -492,56 +479,6 @@ static int cirrusfb_check_var(struct fb_ switch (var->bits_per_pixel) { case 1: - pixels /= 4; - break; /* 8 pixel per byte, only 1/4th of mem usable */ - case 8: - case 16: - case 32: - break; /* 1 pixel == 1 byte */ - default: - printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..." - "color depth not supported.\n", - var->xres, var->yres, var->bits_per_pixel); - DPRINTK("EXIT - EINVAL error\n"); - return -EINVAL; - } - - if (var->xres_virtual < var->xres) - var->xres_virtual = var->xres; - /* use highest possible virtual resolution */ - if (var->yres_virtual == -1) { - var->yres_virtual = pixels / var->xres_virtual; - - printk(KERN_INFO "cirrusfb: virtual resolution set to " - "maximum of %dx%d\n", var->xres_virtual, - var->yres_virtual); - } - if (var->yres_virtual < var->yres) - var->yres_virtual = var->yres; - - if (var->xres_virtual * var->yres_virtual > pixels) { - printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected... " - "virtual resolution too high to fit into video memory!\n", - var->xres_virtual, var->yres_virtual, - var->bits_per_pixel); - DPRINTK("EXIT - EINVAL error\n"); - return -EINVAL; - } - - - if (var->xoffset < 0) - var->xoffset = 0; - if (var->yoffset < 0) - var->yoffset = 0; - - /* truncate xoffset and yoffset to maximum if too high */ - if (var->xoffset > var->xres_virtual - var->xres) - var->xoffset = var->xres_virtual - var->xres - 1; - if (var->yoffset > var->yres_virtual - var->yres) - var->yoffset = var->yres_virtual - var->yres - 1; - - switch (var->bits_per_pixel) { - case 1: var->red.offset = 0; var->red.length = 1; var->green = var->red; @@ -586,12 +523,46 @@ static int cirrusfb_check_var(struct fb_ break; default: - DPRINTK("Unsupported bpp size: %d\n", var->bits_per_pixel); + dev_dbg(info->device, + "Unsupported bpp size: %d\n", var->bits_per_pixel); assert(false); /* should never occur */ break; } + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + /* use highest possible virtual resolution */ + if (var->yres_virtual == -1) { + var->yres_virtual = pixels / var->xres_virtual; + + dev_info(info->device, + "virtual resolution set to maximum of %dx%d\n", + var->xres_virtual, var->yres_virtual); + } + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if (var->xres_virtual * var->yres_virtual > pixels) { + dev_err(info->device, "mode %dx%dx%d rejected... " + "virtual resolution too high to fit into video memory!\n", + var->xres_virtual, var->yres_virtual, + var->bits_per_pixel); + return -EINVAL; + } + + + if (var->xoffset < 0) + var->xoffset = 0; + if (var->yoffset < 0) + var->yoffset = 0; + + /* truncate xoffset and yoffset to maximum if too high */ + if (var->xoffset > var->xres_virtual - var->xres) + var->xoffset = var->xres_virtual - var->xres - 1; + if (var->yoffset > var->yres_virtual - var->yres) + var->yoffset = var->yres_virtual - var->yres - 1; + var->red.msb_right = var->green.msb_right = var->blue.msb_right = @@ -606,9 +577,8 @@ static int cirrusfb_check_var(struct fb_ yres = (yres + 1) / 2; if (yres >= 1280) { - printk(KERN_ERR "cirrusfb: ERROR: VerticalTotal >= 1280; " + dev_err(info->device, "ERROR: VerticalTotal >= 1280; " "special treatment required! (TODO)\n"); - DPRINTK("EXIT - EINVAL error\n"); return -EINVAL; } @@ -642,7 +612,8 @@ static int cirrusfb_decode_var(const str break; default: - DPRINTK("Unsupported bpp size: %d\n", var->bits_per_pixel); + dev_dbg(info->device, + "Unsupported bpp size: %d\n", var->bits_per_pixel); assert(false); /* should never occur */ break; @@ -653,7 +624,7 @@ static int cirrusfb_decode_var(const str /* convert from ps to kHz */ freq = PICOS2KHZ(var->pixclock); - DPRINTK("desired pixclock: %ld kHz\n", freq); + dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq); maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx]; regs->multiplexing = 0; @@ -668,9 +639,9 @@ static int cirrusfb_decode_var(const str break; default: - printk(KERN_ERR "cirrusfb: Frequency greater " - "than maxclock (%ld kHz)\n", maxclock); - DPRINTK("EXIT - return -EINVAL\n"); + dev_err(info->device, + "Frequency greater than maxclock (%ld kHz)\n", + maxclock); return -EINVAL; } } @@ -689,16 +660,17 @@ static int cirrusfb_decode_var(const str return 0; } -static void cirrusfb_set_mclk_as_source(const struct cirrusfb_info *cinfo, - int div) +static void cirrusfb_set_mclk_as_source(const struct fb_info *info, int div) { + struct cirrusfb_info *cinfo = info->par; unsigned char old1f, old1e; + assert(cinfo != NULL); old1f = vga_rseq(cinfo->regbase, CL_SEQR1F) & ~0x40; if (div) { - DPRINTK("Set %s as pixclock source.\n", - (div == 2) ? "MCLK/2" : "MCLK"); + dev_dbg(info->device, "Set %s as pixclock source.\n", + (div == 2) ? "MCLK/2" : "MCLK"); old1f |= 0x40; old1e = vga_rseq(cinfo->regbase, CL_SEQR1E) & ~0x1; if (div == 2) @@ -728,17 +700,16 @@ static int cirrusfb_set_par_foo(struct f long freq; int nom, den, div; - DPRINTK("ENTER\n"); - DPRINTK("Requested mode: %dx%dx%d\n", + dev_dbg(info->device, "Requested mode: %dx%dx%d\n", var->xres, var->yres, var->bits_per_pixel); - DPRINTK("pixclock: %d\n", var->pixclock); + dev_dbg(info->device, "pixclock: %d\n", var->pixclock); init_vgachip(info); err = cirrusfb_decode_var(var, ®s, info); if (err) { /* should never happen */ - DPRINTK("mode change aborted. invalid var.\n"); + dev_dbg(info->device, "mode change aborted. invalid var.\n"); return -EINVAL; } @@ -789,30 +760,30 @@ static int cirrusfb_set_par_foo(struct f vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, 0x20); /* previously: 0x00) */ /* if debugging is enabled, all parameters get output before writing */ - DPRINTK("CRT0: %d\n", htotal); + dev_dbg(info->device, "CRT0: %d\n", htotal); vga_wcrt(regbase, VGA_CRTC_H_TOTAL, htotal); - DPRINTK("CRT1: %d\n", hdispend); + dev_dbg(info->device, "CRT1: %d\n", hdispend); vga_wcrt(regbase, VGA_CRTC_H_DISP, hdispend); - DPRINTK("CRT2: %d\n", var->xres / 8); + dev_dbg(info->device, "CRT2: %d\n", var->xres / 8); vga_wcrt(regbase, VGA_CRTC_H_BLANK_START, var->xres / 8); /* + 128: Compatible read */ - DPRINTK("CRT3: 128+%d\n", (htotal + 5) % 32); + dev_dbg(info->device, "CRT3: 128+%d\n", (htotal + 5) % 32); vga_wcrt(regbase, VGA_CRTC_H_BLANK_END, 128 + ((htotal + 5) % 32)); - DPRINTK("CRT4: %d\n", hsyncstart); + dev_dbg(info->device, "CRT4: %d\n", hsyncstart); vga_wcrt(regbase, VGA_CRTC_H_SYNC_START, hsyncstart); tmp = hsyncend % 32; if ((htotal + 5) & 32) tmp += 128; - DPRINTK("CRT5: %d\n", tmp); + dev_dbg(info->device, "CRT5: %d\n", tmp); vga_wcrt(regbase, VGA_CRTC_H_SYNC_END, tmp); - DPRINTK("CRT6: %d\n", vtotal & 0xff); + dev_dbg(info->device, "CRT6: %d\n", vtotal & 0xff); vga_wcrt(regbase, VGA_CRTC_V_TOTAL, vtotal & 0xff); tmp = 16; /* LineCompare bit #9 */ @@ -830,7 +801,7 @@ static int cirrusfb_set_par_foo(struct f tmp |= 64; if (vsyncstart & 512) tmp |= 128; - DPRINTK("CRT7: %d\n", tmp); + dev_dbg(info->device, "CRT7: %d\n", tmp); vga_wcrt(regbase, VGA_CRTC_OVERFLOW, tmp); tmp = 0x40; /* LineCompare bit #8 */ @@ -838,25 +809,25 @@ static int cirrusfb_set_par_foo(struct f tmp |= 0x20; if (var->vmode & FB_VMODE_DOUBLE) tmp |= 0x80; - DPRINTK("CRT9: %d\n", tmp); + dev_dbg(info->device, "CRT9: %d\n", tmp); vga_wcrt(regbase, VGA_CRTC_MAX_SCAN, tmp); - DPRINTK("CRT10: %d\n", vsyncstart & 0xff); + dev_dbg(info->device, "CRT10: %d\n", vsyncstart & 0xff); vga_wcrt(regbase, VGA_CRTC_V_SYNC_START, vsyncstart & 0xff); - DPRINTK("CRT11: 64+32+%d\n", vsyncend % 16); + dev_dbg(info->device, "CRT11: 64+32+%d\n", vsyncend % 16); vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, vsyncend % 16 + 64 + 32); - DPRINTK("CRT12: %d\n", vdispend & 0xff); + dev_dbg(info->device, "CRT12: %d\n", vdispend & 0xff); vga_wcrt(regbase, VGA_CRTC_V_DISP_END, vdispend & 0xff); - DPRINTK("CRT15: %d\n", (vdispend + 1) & 0xff); + dev_dbg(info->device, "CRT15: %d\n", (vdispend + 1) & 0xff); vga_wcrt(regbase, VGA_CRTC_V_BLANK_START, (vdispend + 1) & 0xff); - DPRINTK("CRT16: %d\n", vtotal & 0xff); + dev_dbg(info->device, "CRT16: %d\n", vtotal & 0xff); vga_wcrt(regbase, VGA_CRTC_V_BLANK_END, vtotal & 0xff); - DPRINTK("CRT18: 0xff\n"); + dev_dbg(info->device, "CRT18: 0xff\n"); vga_wcrt(regbase, VGA_CRTC_LINE_COMPARE, 0xff); tmp = 0; @@ -871,12 +842,15 @@ static int cirrusfb_set_par_foo(struct f if (vtotal & 512) tmp |= 128; - DPRINTK("CRT1a: %d\n", tmp); + dev_dbg(info->device, "CRT1a: %d\n", tmp); vga_wcrt(regbase, CL_CRT1A, tmp); freq = PICOS2KHZ(var->pixclock); bestclock(freq, &nom, &den, &div); + dev_dbg(info->device, "VCLK freq: %ld kHz nom: %d den: %d div: %d\n", + freq, nom, den, div); + /* set VCLK0 */ /* hardware RefClock: 14.31818 MHz */ /* formula: VClk = (OSC * N) / (D * (1+P)) */ @@ -886,10 +860,10 @@ static int cirrusfb_set_par_foo(struct f /* if freq is close to mclk or mclk/2 select mclk * as clock source */ - int divMCLK = cirrusfb_check_mclk(cinfo, freq); + int divMCLK = cirrusfb_check_mclk(info, freq); if (divMCLK) { nom = 0; - cirrusfb_set_mclk_as_source(cinfo, divMCLK); + cirrusfb_set_mclk_as_source(info, divMCLK); } } if (nom) { @@ -904,7 +878,7 @@ static int cirrusfb_set_par_foo(struct f (cinfo->btype == BT_GD5480)) tmp |= 0x80; - DPRINTK("CL_SEQR1B: %ld\n", (long) tmp); + dev_dbg(info->device, "CL_SEQR1B: %ld\n", (long) tmp); vga_wseq(regbase, CL_SEQR1B, tmp); } @@ -952,7 +926,7 @@ static int cirrusfb_set_par_foo(struct f /* programming for different color depths */ if (var->bits_per_pixel == 1) { - DPRINTK("cirrusfb: preparing for 1 bit deep display\n"); + dev_dbg(info->device, "preparing for 1 bit deep display\n"); vga_wgfx(regbase, VGA_GFX_MODE, 0); /* mode register */ /* SR07 */ @@ -964,20 +938,18 @@ static int cirrusfb_set_par_foo(struct f case BT_PICASSO4: case BT_ALPINE: case BT_GD5480: - DPRINTK(" (for GD54xx)\n"); vga_wseq(regbase, CL_SEQR7, - regs.multiplexing ? + regs.multiplexing ? bi->sr07_1bpp_mux : bi->sr07_1bpp); break; case BT_LAGUNA: - DPRINTK(" (for GD546x)\n"); vga_wseq(regbase, CL_SEQR7, vga_rseq(regbase, CL_SEQR7) & ~0x01); break; default: - printk(KERN_WARNING "cirrusfb: unknown Board\n"); + dev_warn(info->device, "unknown Board\n"); break; } @@ -987,14 +959,12 @@ static int cirrusfb_set_par_foo(struct f /* setting the SEQRF on SD64 is not necessary * (only during init) */ - DPRINTK("(for SD64)\n"); /* MCLK select */ vga_wseq(regbase, CL_SEQR1F, 0x1a); break; case BT_PICCOLO: case BT_SPECTRUM: - DPRINTK("(for Piccolo/Spectrum)\n"); /* ### ueberall 0x22? */ /* ##vorher 1c MCLK select */ vga_wseq(regbase, CL_SEQR1F, 0x22); @@ -1003,7 +973,6 @@ static int cirrusfb_set_par_foo(struct f break; case BT_PICASSO: - DPRINTK("(for Picasso)\n"); /* ##vorher 22 MCLK select */ vga_wseq(regbase, CL_SEQR1F, 0x22); /* ## vorher d0 avoid FIFO underruns..? */ @@ -1014,12 +983,11 @@ static int cirrusfb_set_par_foo(struct f case BT_ALPINE: case BT_GD5480: case BT_LAGUNA: - DPRINTK(" (for GD54xx)\n"); /* do nothing */ break; default: - printk(KERN_WARNING "cirrusfb: unknown Board\n"); + dev_warn(info->device, "unknown Board\n"); break; } @@ -1045,7 +1013,7 @@ static int cirrusfb_set_par_foo(struct f */ else if (var->bits_per_pixel == 8) { - DPRINTK("cirrusfb: preparing for 8 bit deep display\n"); + dev_dbg(info->device, "preparing for 8 bit deep display\n"); switch (cinfo->btype) { case BT_SD64: case BT_PICCOLO: @@ -1054,20 +1022,18 @@ static int cirrusfb_set_par_foo(struct f case BT_PICASSO4: case BT_ALPINE: case BT_GD5480: - DPRINTK(" (for GD54xx)\n"); vga_wseq(regbase, CL_SEQR7, regs.multiplexing ? bi->sr07_8bpp_mux : bi->sr07_8bpp); break; case BT_LAGUNA: - DPRINTK(" (for GD546x)\n"); vga_wseq(regbase, CL_SEQR7, vga_rseq(regbase, CL_SEQR7) | 0x01); break; default: - printk(KERN_WARNING "cirrusfb: unknown Board\n"); + dev_warn(info->device, "unknown Board\n"); break; } @@ -1095,18 +1061,16 @@ static int cirrusfb_set_par_foo(struct f break; case BT_ALPINE: - DPRINTK(" (for GD543x)\n"); /* We already set SRF and SR1F */ break; case BT_GD5480: case BT_LAGUNA: - DPRINTK(" (for GD54xx)\n"); /* do nothing */ break; default: - printk(KERN_WARNING "cirrusfb: unknown Board\n"); + dev_warn(info->device, "unknown board\n"); break; } @@ -1134,7 +1098,7 @@ static int cirrusfb_set_par_foo(struct f */ else if (var->bits_per_pixel == 16) { - DPRINTK("cirrusfb: preparing for 16 bit deep display\n"); + dev_dbg(info->device, "preparing for 16 bit deep display\n"); switch (cinfo->btype) { case BT_SD64: /* Extended Sequencer Mode: 256c col. mode */ @@ -1166,24 +1130,21 @@ static int cirrusfb_set_par_foo(struct f break; case BT_ALPINE: - DPRINTK(" (for GD543x)\n"); vga_wseq(regbase, CL_SEQR7, 0xa7); break; case BT_GD5480: - DPRINTK(" (for GD5480)\n"); vga_wseq(regbase, CL_SEQR7, 0x17); /* We already set SRF and SR1F */ break; case BT_LAGUNA: - DPRINTK(" (for GD546x)\n"); vga_wseq(regbase, CL_SEQR7, vga_rseq(regbase, CL_SEQR7) & ~0x01); break; default: - printk(KERN_WARNING "CIRRUSFB: unknown Board\n"); + dev_warn(info->device, "unknown Board\n"); break; } @@ -1211,7 +1172,7 @@ static int cirrusfb_set_par_foo(struct f */ else if (var->bits_per_pixel == 32) { - DPRINTK("cirrusfb: preparing for 32 bit deep display\n"); + dev_dbg(info->device, "preparing for 32 bit deep display\n"); switch (cinfo->btype) { case BT_SD64: /* Extended Sequencer Mode: 256c col. mode */ @@ -1243,24 +1204,21 @@ static int cirrusfb_set_par_foo(struct f break; case BT_ALPINE: - DPRINTK(" (for GD543x)\n"); vga_wseq(regbase, CL_SEQR7, 0xa9); break; case BT_GD5480: - DPRINTK(" (for GD5480)\n"); vga_wseq(regbase, CL_SEQR7, 0x19); /* We already set SRF and SR1F */ break; case BT_LAGUNA: - DPRINTK(" (for GD546x)\n"); vga_wseq(regbase, CL_SEQR7, vga_rseq(regbase, CL_SEQR7) & ~0x01); break; default: - printk(KERN_WARNING "cirrusfb: unknown Board\n"); + dev_warn(info->device, "unknown Board\n"); break; } @@ -1284,8 +1242,8 @@ static int cirrusfb_set_par_foo(struct f */ else - printk(KERN_ERR "cirrusfb: What's this?? " - " requested color depth == %d.\n", + dev_err(info->device, + "What's this? requested color depth == %d.\n", var->bits_per_pixel); vga_wcrt(regbase, VGA_CRTC_OFFSET, offset & 0xff); @@ -1355,7 +1313,7 @@ static int cirrusfb_set_par_foo(struct f */ vga_wseq(regbase, VGA_SEQ_CLOCK_MODE, tmp); - DPRINTK("CL_SEQR1: %d\n", tmp); + dev_dbg(info->device, "CL_SEQR1: %d\n", tmp); cinfo->currentmode = regs; @@ -1363,10 +1321,9 @@ static int cirrusfb_set_par_foo(struct f cirrusfb_pan_display(var, info); #ifdef CIRRUSFB_DEBUG - cirrusfb_dump(); + cirrusfb_dbg_reg_dump(info, NULL); #endif - DPRINTK("EXIT\n"); return 0; } @@ -1424,8 +1381,8 @@ static int cirrusfb_pan_display(struct f unsigned char tmp = 0, tmp2 = 0, xpix; struct cirrusfb_info *cinfo = info->par; - DPRINTK("ENTER\n"); - DPRINTK("virtual offset: (%d,%d)\n", var->xoffset, var->yoffset); + dev_dbg(info->device, + "virtual offset: (%d,%d)\n", var->xoffset, var->yoffset); /* no range checks for xoffset and yoffset, */ /* as fb_pan_display has already done this */ @@ -1481,7 +1438,6 @@ static int cirrusfb_pan_display(struct f cirrusfb_WaitBLT(cinfo->regbase); - DPRINTK("EXIT\n"); return 0; } @@ -1502,11 +1458,11 @@ static int cirrusfb_blank(int blank_mode struct cirrusfb_info *cinfo = info->par; int current_mode = cinfo->blank_mode; - DPRINTK("ENTER, blank mode = %d\n", blank_mode); + dev_dbg(info->device, "ENTER, blank mode = %d\n", blank_mode); if (info->state != FBINFO_STATE_RUNNING || current_mode == blank_mode) { - DPRINTK("EXIT, returning 0\n"); + dev_dbg(info->device, "EXIT, returning 0\n"); return 0; } @@ -1543,12 +1499,12 @@ static int cirrusfb_blank(int blank_mode vga_wgfx(cinfo->regbase, CL_GRE, 0x06); break; default: - DPRINTK("EXIT, returning 1\n"); + dev_dbg(info->device, "EXIT, returning 1\n"); return 1; } cinfo->blank_mode = blank_mode; - DPRINTK("EXIT, returning 0\n"); + dev_dbg(info->device, "EXIT, returning 0\n"); /* Let fbcon do a soft blank for us */ return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0; @@ -1562,8 +1518,6 @@ static void init_vgachip(struct fb_info struct cirrusfb_info *cinfo = info->par; const struct cirrusfb_board_info_rec *bi; - DPRINTK("ENTER\n"); - assert(cinfo != NULL); bi = &cirrusfb_board_info[cinfo->btype]; @@ -1609,7 +1563,7 @@ static void init_vgachip(struct fb_info break; default: - printk(KERN_ERR "cirrusfb: Warning: Unknown board type\n"); + dev_err(info->device, "Warning: Unknown board type\n"); break; } @@ -1798,8 +1752,6 @@ static void init_vgachip(struct fb_info /* misc... */ WHDR(cinfo, 0); /* Hidden DAC register: - */ - - DPRINTK("EXIT\n"); return; } @@ -1808,8 +1760,6 @@ static void switch_monitor(struct cirrus #ifdef CONFIG_ZORRO /* only works on Zorro boards */ static int IsOn = 0; /* XXX not ok for multiple boards */ - DPRINTK("ENTER\n"); - if (cinfo->btype == BT_PICASSO4) return; /* nothing to switch */ if (cinfo->btype == BT_ALPINE) @@ -1819,8 +1769,6 @@ static void switch_monitor(struct cirrus if (cinfo->btype == BT_PICASSO) { if ((on && !IsOn) || (!on && IsOn)) WSFR(cinfo, 0xff); - - DPRINTK("EXIT\n"); return; } if (on) { @@ -1847,11 +1795,10 @@ static void switch_monitor(struct cirrus case BT_SPECTRUM: WSFR(cinfo, 0x4f); break; - default: /* do nothing */ break; + default: /* do nothing */ + break; } } - - DPRINTK("EXIT\n"); #endif /* CONFIG_ZORRO */ } @@ -1953,12 +1900,8 @@ static void cirrusfb_imageblit(struct fb #define PREP_IO_BASE ((volatile unsigned char *) 0x80000000) static void get_prep_addrs(unsigned long *display, unsigned long *registers) { - DPRINTK("ENTER\n"); - *display = PREP_VIDEO_BASE; *registers = (unsigned long) PREP_IO_BASE; - - DPRINTK("EXIT\n"); } #endif /* CONFIG_PPC_PREP */ @@ -1970,13 +1913,12 @@ static int release_io_ports; * based on the DRAM bandwidth bit and DRAM bank switching bit. This * works with 1MB, 2MB and 4MB configurations (which the Motorola boards * seem to have. */ -static unsigned int __devinit cirrusfb_get_memsize(u8 __iomem *regbase) +static unsigned int __devinit cirrusfb_get_memsize(struct fb_info *info, + u8 __iomem *regbase) { unsigned long mem; unsigned char SRF; - DPRINTK("ENTER\n"); - SRF = vga_rseq(regbase, CL_SEQRF); switch ((SRF & 0x18)) { case 0x08: @@ -1992,7 +1934,7 @@ static unsigned int __devinit cirrusfb_g mem = 2048 * 1024; break; default: - printk(KERN_WARNING "CLgenfb: Unknown memory size!\n"); + dev_warn(info->device, "CLgenfb: Unknown memory size!\n"); mem = 1024 * 1024; } if (SRF & 0x80) @@ -2002,8 +1944,6 @@ static unsigned int __devinit cirrusfb_g mem *= 2; /* TODO: Handling of GD5446/5480 (see XF86 sources ...) */ - - DPRINTK("EXIT\n"); return mem; } @@ -2014,8 +1954,6 @@ static void get_pci_addrs(const struct p assert(display != NULL); assert(registers != NULL); - DPRINTK("ENTER\n"); - *display = 0; *registers = 0; @@ -2030,8 +1968,6 @@ static void get_pci_addrs(const struct p } assert(*display != 0); - - DPRINTK("EXIT\n"); } static void cirrusfb_pci_unmap(struct fb_info *info) @@ -2117,11 +2053,6 @@ static int __devinit cirrusfb_register(s int err; enum cirrus_board btype; - DPRINTK("ENTER\n"); - - printk(KERN_INFO "cirrusfb: Driver for Cirrus Logic based " - "graphic boards, v" CIRRUSFB_VERSION "\n"); - btype = cinfo->btype; /* sanity checks */ @@ -2130,11 +2061,11 @@ static int __devinit cirrusfb_register(s /* set all the vital stuff */ cirrusfb_set_fbinfo(info); - DPRINTK("cirrusfb: (RAM start set to: 0x%p)\n", info->screen_base); + dev_dbg(info->device, "(RAM start set to: 0x%p)\n", info->screen_base); err = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8); if (!err) { - DPRINTK("wrong initial video mode\n"); + dev_dbg(info->device, "wrong initial video mode\n"); err = -EINVAL; goto err_dealloc_cmap; } @@ -2144,18 +2075,18 @@ static int __devinit cirrusfb_register(s err = cirrusfb_decode_var(&info->var, &cinfo->currentmode, info); if (err < 0) { /* should never happen */ - DPRINTK("choking on default var... umm, no good.\n"); + dev_dbg(info->device, + "choking on default var... umm, no good.\n"); goto err_dealloc_cmap; } err = register_framebuffer(info); if (err < 0) { - printk(KERN_ERR "cirrusfb: could not register " - "fb device; err = %d!\n", err); + dev_err(info->device, + "could not register fb device; err = %d!\n", err); goto err_dealloc_cmap; } - DPRINTK("EXIT, returning 0\n"); return 0; err_dealloc_cmap: @@ -2168,17 +2099,13 @@ err_dealloc_cmap: static void __devexit cirrusfb_cleanup(struct fb_info *info) { struct cirrusfb_info *cinfo = info->par; - DPRINTK("ENTER\n"); switch_monitor(cinfo, 0); - unregister_framebuffer(info); fb_dealloc_cmap(&info->cmap); - printk("Framebuffer unregistered\n"); + dev_dbg(info->device, "Framebuffer unregistered\n"); cinfo->unmap(info); framebuffer_release(info); - - DPRINTK("EXIT\n"); } #ifdef CONFIG_PCI @@ -2207,9 +2134,11 @@ static int __devinit cirrusfb_pci_regist cinfo = info->par; cinfo->btype = btype = (enum cirrus_board) ent->driver_data; - DPRINTK(" Found PCI device, base address 0 is 0x%x, btype set to %d\n", + dev_dbg(info->device, + " Found PCI device, base address 0 is 0x%x, btype set to %d\n", pdev->resource[0].start, btype); - DPRINTK(" base address 1 is 0x%x\n", pdev->resource[1].start); + dev_dbg(info->device, + " base address 1 is 0x%x\n", pdev->resource[1].start); if (isPReP) { pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, 0x00000000); @@ -2219,30 +2148,29 @@ static int __devinit cirrusfb_pci_regist /* PReP dies if we ioremap the IO registers, but it works w/out... */ cinfo->regbase = (char __iomem *) info->fix.mmio_start; } else { - DPRINTK("Attempt to get PCI info for Cirrus Graphics Card\n"); + dev_dbg(info->device, + "Attempt to get PCI info for Cirrus Graphics Card\n"); get_pci_addrs(pdev, &board_addr, &info->fix.mmio_start); /* FIXME: this forces VGA. alternatives? */ cinfo->regbase = NULL; } - DPRINTK("Board address: 0x%lx, register address: 0x%lx\n", + dev_dbg(info->device, "Board address: 0x%lx, register address: 0x%lx\n", board_addr, info->fix.mmio_start); board_size = (btype == BT_GD5480) ? - 32 * MB_ : cirrusfb_get_memsize(cinfo->regbase); + 32 * MB_ : cirrusfb_get_memsize(info, cinfo->regbase); ret = pci_request_regions(pdev, "cirrusfb"); if (ret < 0) { - printk(KERN_ERR "cirrusfb: cannot reserve region 0x%lx, " - "abort\n", - board_addr); + dev_err(info->device, "cannot reserve region 0x%lx, abort\n", + board_addr); goto err_release_fb; } #if 0 /* if the system didn't claim this region, we would... */ if (!request_mem_region(0xA0000, 65535, "cirrusfb")) { - printk(KERN_ERR "cirrusfb: cannot reserve region 0x%lx, abort\n" -, - 0xA0000L); + dev_err(info->device, "cannot reserve region 0x%lx, abort\n", + 0xA0000L); ret = -EBUSY; goto err_release_regions; } @@ -2260,9 +2188,9 @@ static int __devinit cirrusfb_pci_regist info->screen_size = board_size; cinfo->unmap = cirrusfb_pci_unmap; - printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus " - "Logic chipset on PCI bus\n", - info->screen_size >> 10, board_addr); + dev_info(info->device, + "Cirrus Logic chipset on PCI bus, RAM (%lu kB) at 0x%lx\n", + info->screen_size >> 10, board_addr); pci_set_drvdata(pdev, info); ret = cirrusfb_register(info); @@ -2288,11 +2216,8 @@ err_out: static void __devexit cirrusfb_pci_unregister(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); - DPRINTK("ENTER\n"); cirrusfb_cleanup(info); - - DPRINTK("EXIT\n"); } static struct pci_driver cirrusfb_pci_driver = { @@ -2324,8 +2249,6 @@ static int __devinit cirrusfb_zorro_regi if (cirrusfb_zorro_table2[btype].id2) z2 = zorro_find_device(cirrusfb_zorro_table2[btype].id2, NULL); size = cirrusfb_zorro_table2[btype].size; - printk(KERN_INFO "cirrusfb: %s board detected; ", - cirrusfb_board_info[btype].name); info = framebuffer_alloc(sizeof(struct cirrusfb_info), &z->dev); if (!info) { @@ -2334,6 +2257,9 @@ static int __devinit cirrusfb_zorro_regi goto err_out; } + dev_info(info->device, "%s board detected\n", + cirrusfb_board_info[btype].name); + cinfo = info->par; cinfo->btype = btype; @@ -2345,19 +2271,16 @@ static int __devinit cirrusfb_zorro_regi info->screen_size = size; if (!zorro_request_device(z, "cirrusfb")) { - printk(KERN_ERR "cirrusfb: cannot reserve region 0x%lx, " - "abort\n", - board_addr); + dev_err(info->device, "cannot reserve region 0x%lx, abort\n", + board_addr); ret = -EBUSY; goto err_release_fb; } - printk(" RAM (%lu MB) at $%lx, ", board_size / MB_, board_addr); - ret = -EIO; if (btype == BT_PICASSO4) { - printk(KERN_INFO " REG at $%lx\n", board_addr + 0x600000); + dev_info(info->device, " REG at $%lx\n", board_addr + 0x600000); /* To be precise, for the P4 this is not the */ /* begin of the board, but the begin of RAM. */ @@ -2367,7 +2290,7 @@ static int __devinit cirrusfb_zorro_regi if (!cinfo->regbase) goto err_release_region; - DPRINTK("cirrusfb: Virtual address for board set to: $%p\n", + dev_dbg(info->device, "Virtual address for board set to: $%p\n", cinfo->regbase); cinfo->regbase += 0x600000; info->fix.mmio_start = board_addr + 0x600000; @@ -2377,8 +2300,8 @@ static int __devinit cirrusfb_zorro_regi if (!info->screen_base) goto err_unmap_regbase; } else { - printk(KERN_INFO " REG at $%lx\n", - (unsigned long) z2->resource.start); + dev_info(info->device, " REG at $%lx\n", + (unsigned long) z2->resource.start); info->fix.smem_start = board_addr; if (board_addr > 0x01000000) @@ -2392,12 +2315,15 @@ static int __devinit cirrusfb_zorro_regi cinfo->regbase = (caddr_t) ZTWO_VADDR(z2->resource.start); info->fix.mmio_start = z2->resource.start; - DPRINTK("cirrusfb: Virtual address for board set to: $%p\n", + dev_dbg(info->device, "Virtual address for board set to: $%p\n", cinfo->regbase); } cinfo->unmap = cirrusfb_zorro_unmap; - printk(KERN_INFO "Cirrus Logic chipset on Zorro bus\n"); + dev_info(info->device, + "Cirrus Logic chipset on Zorro bus, RAM (%lu MB) at $%lx\n" + board_size / MB_, board_addr); + zorro_set_drvdata(z, info); ret = cirrusfb_register(info); @@ -2424,11 +2350,8 @@ err_out: void __devexit cirrusfb_zorro_unregister(struct zorro_dev *z) { struct fb_info *info = zorro_get_drvdata(z); - DPRINTK("ENTER\n"); cirrusfb_cleanup(info); - - DPRINTK("EXIT\n"); } static struct zorro_driver cirrusfb_zorro_driver = { @@ -2464,8 +2387,6 @@ static int __init cirrusfb_init(void) static int __init cirrusfb_setup(char *options) { char *this_opt; - DPRINTK("ENTER\n"); - if (!options || !*options) return 0; @@ -2473,7 +2394,8 @@ static int __init cirrusfb_setup(char *o if (!*this_opt) continue; - DPRINTK("cirrusfb_setup: option '%s'\n", this_opt); + dev_dbg(info->device, + "cirrusfb_setup: option '%s'\n", this_opt); if (!strcmp(this_opt, "noaccel")) noaccel = 1; @@ -2560,8 +2482,6 @@ static void AttrOn(const struct cirrusfb { assert(cinfo != NULL); - DPRINTK("ENTER\n"); - if (vga_rcrt(cinfo->regbase, CL_CRT24) & 0x80) { /* if we're just in "write value" mode, write back the */ /* same value as before to not modify anything */ @@ -2574,8 +2494,6 @@ static void AttrOn(const struct cirrusfb /* dummy write on Reg0 to be on "write index" mode next time */ vga_w(cinfo->regbase, VGA_ATT_IW, 0x00); - - DPRINTK("EXIT\n"); } /*** WHDR() - write into the Hidden DAC register ***/ @@ -2723,8 +2641,6 @@ static void cirrusfb_BitBLT(u8 __iomem * u_long nsrc, ndest; u_char bltmode; - DPRINTK("ENTER\n"); - nwidth = width - 1; nheight = height - 1; @@ -2813,8 +2729,6 @@ static void cirrusfb_BitBLT(u8 __iomem * /* and finally: GO! */ vga_wgfx(regbase, CL_GR31, 0x02); /* BLT Start/status */ - - DPRINTK("EXIT\n"); } /******************************************************************* @@ -2831,8 +2745,6 @@ static void cirrusfb_RectFill(u8 __iomem u_long ndest; u_char op; - DPRINTK("ENTER\n"); - nwidth = width - 1; nheight = height - 1; @@ -2896,8 +2808,6 @@ static void cirrusfb_RectFill(u8 __iomem /* and finally: GO! */ vga_wgfx(regbase, CL_GR31, 0x02); /* BLT Start/status */ - - DPRINTK("EXIT\n"); } /************************************************************************** @@ -2917,8 +2827,6 @@ static void bestclock(long freq, int *no *den = 0; *div = 0; - DPRINTK("ENTER\n"); - if (freq < 8000) freq = 8000; @@ -2960,12 +2868,6 @@ static void bestclock(long freq, int *no } } } - - DPRINTK("Best possible values for given frequency:\n"); - DPRINTK(" freq: %ld kHz nom: %d den: %d div: %d\n", - freq, *nom, *den, *div); - - DPRINTK("EXIT\n"); } /* ------------------------------------------------------------------------- @@ -2978,32 +2880,6 @@ static void bestclock(long freq, int *no #ifdef CIRRUSFB_DEBUG /** - * cirrusfb_dbg_print_byte - * @name: name associated with byte value to be displayed - * @val: byte value to be displayed - * - * DESCRIPTION: - * Display an indented string, along with a hexidecimal byte value, and - * its decoded bits. Bits 7 through 0 are listed in left-to-right - * order. - */ - -static -void cirrusfb_dbg_print_byte(const char *name, unsigned char val) -{ - DPRINTK("%8s = 0x%02X (bits 7-0: %c%c%c%c%c%c%c%c)\n", - name, val, - val & 0x80 ? '1' : '0', - val & 0x40 ? '1' : '0', - val & 0x20 ? '1' : '0', - val & 0x10 ? '1' : '0', - val & 0x08 ? '1' : '0', - val & 0x04 ? '1' : '0', - val & 0x02 ? '1' : '0', - val & 0x01 ? '1' : '0'); -} - -/** * cirrusfb_dbg_print_regs * @base: If using newmmio, the newmmio base address, otherwise %NULL * @reg_class: type of registers to read: %CRT, or %SEQ @@ -3014,9 +2890,9 @@ void cirrusfb_dbg_print_byte(const char * used at the given @base address to query the information. */ -static -void cirrusfb_dbg_print_regs(caddr_t regbase, - enum cirrusfb_dbg_reg_class reg_class, ...) +static void cirrusfb_dbg_print_regs(struct fb_info *info, + caddr_t regbase, + enum cirrusfb_dbg_reg_class reg_class, ...) { va_list list; unsigned char val = 0; @@ -3042,7 +2918,7 @@ void cirrusfb_dbg_print_regs(caddr_t reg break; } - cirrusfb_dbg_print_byte(name, val); + dev_dbg(info->device, "%8s = 0x%02X\n", name, val); name = va_arg(list, char *); } @@ -3051,18 +2927,6 @@ void cirrusfb_dbg_print_regs(caddr_t reg } /** - * cirrusfb_dump - * @cirrusfbinfo: - * - * DESCRIPTION: - */ - -static void cirrusfb_dump(void) -{ - cirrusfb_dbg_reg_dump(NULL); -} - -/** * cirrusfb_dbg_reg_dump * @base: If using newmmio, the newmmio base address, otherwise %NULL * @@ -3072,12 +2936,11 @@ static void cirrusfb_dump(void) * used at the given @base address to query the information. */ -static -void cirrusfb_dbg_reg_dump(caddr_t regbase) +static void cirrusfb_dbg_reg_dump(struct fb_info *info, caddr_t regbase) { - DPRINTK("CIRRUSFB VGA CRTC register dump:\n"); + dev_dbg(info->device, "VGA CRTC register dump:\n"); - cirrusfb_dbg_print_regs(regbase, CRT, + cirrusfb_dbg_print_regs(info, regbase, CRT, "CR00", 0x00, "CR01", 0x01, "CR02", 0x02, @@ -3127,11 +2990,11 @@ void cirrusfb_dbg_reg_dump(caddr_t regba "CR3F", 0x3F, NULL); - DPRINTK("\n"); + dev_dbg(info->device, "\n"); - DPRINTK("CIRRUSFB VGA SEQ register dump:\n"); + dev_dbg(info->device, "VGA SEQ register dump:\n"); - cirrusfb_dbg_print_regs(regbase, SEQ, + cirrusfb_dbg_print_regs(info, regbase, SEQ, "SR00", 0x00, "SR01", 0x01, "SR02", 0x02, @@ -3160,7 +3023,7 @@ void cirrusfb_dbg_reg_dump(caddr_t regba "SR1F", 0x1F, NULL); - DPRINTK("\n"); + dev_dbg(info->device, "\n"); } #endif /* CIRRUSFB_DEBUG */ _ Patches currently in -mm which might be from krzysztof.h1@xxxxxxxxx are cirrusfb-convert-printks-to-dev_foo.patch intelfb-support-i854.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html