The patch titled
proc tty: switch amiserial to ->proc_fops
has been added to the -mm tree. Its filename is
proc-tty-switch-amiserial-to-proc_fops.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: proc tty: switch amiserial to ->proc_fops
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/char/amiserial.c | 60 ++++++++++++++++---------------------
1 file changed, 27 insertions(+), 33 deletions(-)
diff -puN drivers/char/amiserial.c~proc-tty-switch-amiserial-to-proc_fops drivers/char/amiserial.c
--- a/drivers/char/amiserial.c~proc-tty-switch-amiserial-to-proc_fops
+++ a/drivers/char/amiserial.c
@@ -79,6 +79,7 @@ static char *serial_version = "4.30";
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bitops.h>
@@ -1825,14 +1826,13 @@ static int rs_open(struct tty_struct *tt
* /proc fs routines....
*/
-static inline int line_info(char *buf, struct serial_state *state)
+static inline void line_info(struct seq_file *m, struct serial_state *state)
{
struct async_struct *info = state->info, scr_info;
char stat_buf[30], control, status;
- int ret;
unsigned long flags;
- ret = sprintf(buf, "%d: uart:amiga_builtin",state->line);
+ seq_printf(m, "%d: uart:amiga_builtin",state->line);
/*
* Figure out the current RS-232 lines
@@ -1864,55 +1864,49 @@ static inline int line_info(char *buf, s
strcat(stat_buf, "|CD");
if (info->quot) {
- ret += sprintf(buf+ret, " baud:%d",
- state->baud_base / info->quot);
+ seq_printf(m, " baud:%d", state->baud_base / info->quot);
}
- ret += sprintf(buf+ret, " tx:%d rx:%d",
- state->icount.tx, state->icount.rx);
+ seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx);
if (state->icount.frame)
- ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
+ seq_printf(m, " fe:%d", state->icount.frame);
if (state->icount.parity)
- ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
+ seq_printf(m, " pe:%d", state->icount.parity);
if (state->icount.brk)
- ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
+ seq_printf(m, " brk:%d", state->icount.brk);
if (state->icount.overrun)
- ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
+ seq_printf(m, " oe:%d", state->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ seq_printf(m, " %s\n", stat_buf+1);
}
-static int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+static int rs_proc_show(struct seq_file *m, void *v)
{
- int len = 0, l;
- off_t begin = 0;
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+ line_info(m, &rs_table[0]);
+ return 0;
+}
- len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
- l = line_info(page + len, &rs_table[0]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int rs_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, rs_proc_show, NULL);
}
+static const struct file_operations rs_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = rs_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* ---------------------------------------------------------------------
* rs_init() and friends
@@ -1951,9 +1945,9 @@ static const struct tty_operations seria
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
+ .proc_fops = &rs_proc_fops,
};
/*
_
Patches currently in -mm which might be from adobriyan@xxxxxxxxx are
seq_file-move-traverse-so-it-can-be-used-from-seq_read.patch
seq_file-properly-cope-with-pread.patch
linux-next.patch
eeepc-should-depend-on-input.patch
tags-fix-config-symbols-generation.patch
sm501-fix-section-mismatches.patch
mpt-remove-unused-struct-mpt_proc_entry_t.patch
proc-tty-add-struct-tty_operations-proc_fops.patch
proc-tty-switch-cyclades-to-proc_fops.patch
proc-tty-switch-ip2-to-proc_fops.patch
proc-tty-switch-istallion-to-proc_fops.patch
proc-tty-switch-synclink_cs-to-proc_fops.patch
proc-tty-switch-stallion-to-proc_fops.patch
proc-tty-switch-synclink-to-proc_fops.patch
proc-tty-switch-synclink_gt-to-proc_fops.patch
proc-tty-switch-synclinkmp-to-proc_fops.patch
proc-tty-switch-sdio_uart-to-proc_fops.patch
proc-tty-switch-serial_core-to-proc_fops.patch
proc-tty-switch-usb-serial-to-proc_fops.patch
proc-tty-switch-ircomm-to-proc_fops.patch
proc-tty-switch-amiserial-to-proc_fops.patch
proc-tty-switch-ia64-simserial-to-proc_fops.patch
proc-tty-switch-xtensa-iss-console-to-proc_fops.patch
proc-tty-remove-struct-tty_operations-read_proc.patch
softirq-introduce-statistics-for-softirq.patch
proc-export-statistics-for-softirq-to-proc.patch
proc-export-statistics-for-softirq-to-proc-fix.patch
proc-update-document-for-proc-softirqs-and-proc-stat.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
