The patch titled proc tty: switch synclink_cs to ->proc_fops has been added to the -mm tree. Its filename is proc-tty-switch-synclink_cs-to-proc_fops.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: proc tty: switch synclink_cs to ->proc_fops From: Alexey Dobriyan <adobriyan@xxxxxxxxx> Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx> Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/char/pcmcia/synclink_cs.c | 73 +++++++++++++--------------- 1 file changed, 34 insertions(+), 39 deletions(-) diff -puN drivers/char/pcmcia/synclink_cs.c~proc-tty-switch-synclink_cs-to-proc_fops drivers/char/pcmcia/synclink_cs.c --- a/drivers/char/pcmcia/synclink_cs.c~proc-tty-switch-synclink_cs-to-proc_fops +++ a/drivers/char/pcmcia/synclink_cs.c @@ -51,6 +51,7 @@ #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/mm.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/netdevice.h> #include <linux/vmalloc.h> @@ -2619,13 +2620,12 @@ cleanup: * /proc fs routines.... */ -static inline int line_info(char *buf, MGSLPC_INFO *info) +static inline void line_info(struct seq_file *m, MGSLPC_INFO *info) { char stat_buf[30]; - int ret; unsigned long flags; - ret = sprintf(buf, "%s:io:%04X irq:%d", + seq_printf(m, "%s:io:%04X irq:%d", info->device_name, info->io_base, info->irq_level); /* output current serial signal states */ @@ -2649,75 +2649,70 @@ static inline int line_info(char *buf, M strcat(stat_buf, "|RI"); if (info->params.mode == MGSL_MODE_HDLC) { - ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d", + seq_printf(m, " HDLC txok:%d rxok:%d", info->icount.txok, info->icount.rxok); if (info->icount.txunder) - ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); + seq_printf(m, " txunder:%d", info->icount.txunder); if (info->icount.txabort) - ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); + seq_printf(m, " txabort:%d", info->icount.txabort); if (info->icount.rxshort) - ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); + seq_printf(m, " rxshort:%d", info->icount.rxshort); if (info->icount.rxlong) - ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); + seq_printf(m, " rxlong:%d", info->icount.rxlong); if (info->icount.rxover) - ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); + seq_printf(m, " rxover:%d", info->icount.rxover); if (info->icount.rxcrc) - ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc); + seq_printf(m, " rxcrc:%d", info->icount.rxcrc); } else { - ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d", + seq_printf(m, " ASYNC tx:%d rx:%d", info->icount.tx, info->icount.rx); if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%d", info->icount.frame); + seq_printf(m, " fe:%d", info->icount.frame); if (info->icount.parity) - ret += sprintf(buf+ret, " pe:%d", info->icount.parity); + seq_printf(m, " pe:%d", info->icount.parity); if (info->icount.brk) - ret += sprintf(buf+ret, " brk:%d", info->icount.brk); + seq_printf(m, " brk:%d", info->icount.brk); if (info->icount.overrun) - ret += sprintf(buf+ret, " oe:%d", info->icount.overrun); + seq_printf(m, " oe:%d", info->icount.overrun); } /* Append serial signal status to end */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); + seq_printf(m, " %s\n", stat_buf+1); - ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", info->tx_active,info->bh_requested,info->bh_running, info->pending_bh); - - return ret; } /* Called to print information about devices */ -static int mgslpc_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) +static int mgslpc_proc_show(struct seq_file *m, void *v) { - int len = 0, l; - off_t begin = 0; MGSLPC_INFO *info; - len += sprintf(page, "synclink driver:%s\n", driver_version); + seq_printf(m, "synclink driver:%s\n", driver_version); info = mgslpc_device_list; while( info ) { - l = line_info(page + len, info); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + line_info(m, info); info = info->next_device; } + return 0; +} - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); +static int mgslpc_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mgslpc_proc_show, NULL); } +static const struct file_operations mgslpc_proc_fops = { + .owner = THIS_MODULE, + .open = mgslpc_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int rx_alloc_buffers(MGSLPC_INFO *info) { /* each buffer has header and data */ @@ -2861,13 +2856,13 @@ static const struct tty_operations mgslp .send_xchar = mgslpc_send_xchar, .break_ctl = mgslpc_break, .wait_until_sent = mgslpc_wait_until_sent, - .read_proc = mgslpc_read_proc, .set_termios = mgslpc_set_termios, .stop = tx_pause, .start = tx_release, .hangup = mgslpc_hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .proc_fops = &mgslpc_proc_fops, }; static void synclink_cs_cleanup(void) _ Patches currently in -mm which might be from adobriyan@xxxxxxxxx are seq_file-move-traverse-so-it-can-be-used-from-seq_read.patch seq_file-properly-cope-with-pread.patch linux-next.patch eeepc-should-depend-on-input.patch tags-fix-config-symbols-generation.patch sm501-fix-section-mismatches.patch mpt-remove-unused-struct-mpt_proc_entry_t.patch proc-tty-add-struct-tty_operations-proc_fops.patch proc-tty-switch-cyclades-to-proc_fops.patch proc-tty-switch-ip2-to-proc_fops.patch proc-tty-switch-istallion-to-proc_fops.patch proc-tty-switch-synclink_cs-to-proc_fops.patch proc-tty-switch-stallion-to-proc_fops.patch proc-tty-switch-synclink-to-proc_fops.patch proc-tty-switch-synclink_gt-to-proc_fops.patch proc-tty-switch-synclinkmp-to-proc_fops.patch proc-tty-switch-sdio_uart-to-proc_fops.patch proc-tty-switch-serial_core-to-proc_fops.patch proc-tty-switch-usb-serial-to-proc_fops.patch proc-tty-switch-ircomm-to-proc_fops.patch proc-tty-switch-amiserial-to-proc_fops.patch proc-tty-switch-ia64-simserial-to-proc_fops.patch proc-tty-switch-xtensa-iss-console-to-proc_fops.patch proc-tty-remove-struct-tty_operations-read_proc.patch softirq-introduce-statistics-for-softirq.patch proc-export-statistics-for-softirq-to-proc.patch proc-export-statistics-for-softirq-to-proc-fix.patch proc-update-document-for-proc-softirqs-and-proc-stat.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html