The patch titled
proc tty: switch istallion to ->proc_fops
has been added to the -mm tree. Its filename is
proc-tty-switch-istallion-to-proc_fops.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: proc tty: switch istallion to ->proc_fops
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/char/istallion.c | 121 +++++++++++++++----------------------
1 file changed, 52 insertions(+), 69 deletions(-)
diff -puN drivers/char/istallion.c~proc-tty-switch-istallion-to-proc_fops drivers/char/istallion.c
--- a/drivers/char/istallion.c~proc-tty-switch-istallion-to-proc_fops
+++ a/drivers/char/istallion.c
@@ -24,6 +24,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/seq_file.h>
#include <linux/cdk.h>
#include <linux/comstats.h>
#include <linux/istallion.h>
@@ -613,7 +614,6 @@ static int stli_breakctl(struct tty_stru
static void stli_waituntilsent(struct tty_struct *tty, int timeout);
static void stli_sendxchar(struct tty_struct *tty, char ch);
static void stli_hangup(struct tty_struct *tty);
-static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos);
static int stli_brdinit(struct stlibrd *brdp);
static int stli_startbrd(struct stlibrd *brdp);
@@ -1893,20 +1893,10 @@ static void stli_sendxchar(struct tty_st
stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0);
}
-/*****************************************************************************/
-
-#define MAXLINE 80
-
-/*
- * Format info for a specified port. The line is deliberately limited
- * to 80 characters. (If it is too long it will be truncated, if too
- * short then padded with spaces).
- */
-
-static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos)
+static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stliport *portp, int portnr)
{
- char *sp, *uart;
- int rc, cnt;
+ char *uart;
+ int rc;
rc = stli_portcmdstats(NULL, portp);
@@ -1918,44 +1908,50 @@ static int stli_portinfo(struct stlibrd
default:uart = "CD1400"; break;
}
}
-
- sp = pos;
- sp += sprintf(sp, "%d: uart:%s ", portnr, uart);
+ seq_printf(m, "%d: uart:%s ", portnr, uart);
if ((brdp->state & BST_STARTED) && (rc >= 0)) {
- sp += sprintf(sp, "tx:%d rx:%d", (int) stli_comstats.txtotal,
+ char sep;
+
+ seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal,
(int) stli_comstats.rxtotal);
if (stli_comstats.rxframing)
- sp += sprintf(sp, " fe:%d",
+ seq_printf(m, " fe:%d",
(int) stli_comstats.rxframing);
if (stli_comstats.rxparity)
- sp += sprintf(sp, " pe:%d",
+ seq_printf(m, " pe:%d",
(int) stli_comstats.rxparity);
if (stli_comstats.rxbreaks)
- sp += sprintf(sp, " brk:%d",
+ seq_printf(m, " brk:%d",
(int) stli_comstats.rxbreaks);
if (stli_comstats.rxoverrun)
- sp += sprintf(sp, " oe:%d",
+ seq_printf(m, " oe:%d",
(int) stli_comstats.rxoverrun);
- cnt = sprintf(sp, "%s%s%s%s%s ",
- (stli_comstats.signals & TIOCM_RTS) ? "|RTS" : "",
- (stli_comstats.signals & TIOCM_CTS) ? "|CTS" : "",
- (stli_comstats.signals & TIOCM_DTR) ? "|DTR" : "",
- (stli_comstats.signals & TIOCM_CD) ? "|DCD" : "",
- (stli_comstats.signals & TIOCM_DSR) ? "|DSR" : "");
- *sp = ' ';
- sp += cnt;
- }
-
- for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++)
- *sp++ = ' ';
- if (cnt >= MAXLINE)
- pos[(MAXLINE - 2)] = '+';
- pos[(MAXLINE - 1)] = '\n';
-
- return(MAXLINE);
+ sep = ' ';
+ if (stli_comstats.signals & TIOCM_RTS) {
+ seq_printf(m, "%c%s", sep, "RTS");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_CTS) {
+ seq_printf(m, "%c%s", sep, "CTS");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_DTR) {
+ seq_printf(m, "%c%s", sep, "DTR");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_CD) {
+ seq_printf(m, "%c%s", sep, "DCD");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_DSR) {
+ seq_printf(m, "%c%s", sep, "DSR");
+ sep = '|';
+ }
+ }
+ seq_putc(m, '\n');
}
/*****************************************************************************/
@@ -1964,26 +1960,15 @@ static int stli_portinfo(struct stlibrd
* Port info, read from the /proc file system.
*/
-static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
+static int stli_proc_show(struct seq_file *m, void *v)
{
struct stlibrd *brdp;
struct stliport *portp;
unsigned int brdnr, portnr, totalport;
- int curoff, maxoff;
- char *pos;
- pos = page;
totalport = 0;
- curoff = 0;
- if (off == 0) {
- pos += sprintf(pos, "%s: version %s", stli_drvtitle,
- stli_drvversion);
- while (pos < (page + MAXLINE - 1))
- *pos++ = ' ';
- *pos++ = '\n';
- }
- curoff = MAXLINE;
+ seq_printf(m, "%s: version %s\n", stli_drvtitle, stli_drvversion);
/*
* We scan through for each board, panel and port. The offset is
@@ -1996,33 +1981,31 @@ static int stli_readproc(char *page, cha
if (brdp->state == 0)
continue;
- maxoff = curoff + (brdp->nrports * MAXLINE);
- if (off >= maxoff) {
- curoff = maxoff;
- continue;
- }
-
totalport = brdnr * STL_MAXPORTS;
for (portnr = 0; (portnr < brdp->nrports); portnr++,
totalport++) {
portp = brdp->ports[portnr];
if (portp == NULL)
continue;
- if (off >= (curoff += MAXLINE))
- continue;
- if ((pos - page + MAXLINE) > count)
- goto stli_readdone;
- pos += stli_portinfo(brdp, portp, totalport, pos);
+ stli_portinfo(m, brdp, portp, totalport);
}
}
+ return 0;
+}
- *eof = 1;
-
-stli_readdone:
- *start = page;
- return(pos - page);
+static int stli_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, stli_proc_show, NULL);
}
+static const struct file_operations stli_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = stli_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*****************************************************************************/
/*
@@ -4427,9 +4410,9 @@ static const struct tty_operations stli_
.break_ctl = stli_breakctl,
.wait_until_sent = stli_waituntilsent,
.send_xchar = stli_sendxchar,
- .read_proc = stli_readproc,
.tiocmget = stli_tiocmget,
.tiocmset = stli_tiocmset,
+ .proc_fops = &stli_proc_fops,
};
static const struct tty_port_operations stli_port_ops = {
_
Patches currently in -mm which might be from adobriyan@xxxxxxxxx are
seq_file-move-traverse-so-it-can-be-used-from-seq_read.patch
seq_file-properly-cope-with-pread.patch
linux-next.patch
eeepc-should-depend-on-input.patch
tags-fix-config-symbols-generation.patch
sm501-fix-section-mismatches.patch
mpt-remove-unused-struct-mpt_proc_entry_t.patch
proc-tty-add-struct-tty_operations-proc_fops.patch
proc-tty-switch-cyclades-to-proc_fops.patch
proc-tty-switch-ip2-to-proc_fops.patch
proc-tty-switch-istallion-to-proc_fops.patch
proc-tty-switch-synclink_cs-to-proc_fops.patch
proc-tty-switch-stallion-to-proc_fops.patch
proc-tty-switch-synclink-to-proc_fops.patch
proc-tty-switch-synclink_gt-to-proc_fops.patch
proc-tty-switch-synclinkmp-to-proc_fops.patch
proc-tty-switch-sdio_uart-to-proc_fops.patch
proc-tty-switch-serial_core-to-proc_fops.patch
proc-tty-switch-usb-serial-to-proc_fops.patch
proc-tty-switch-ircomm-to-proc_fops.patch
proc-tty-switch-amiserial-to-proc_fops.patch
proc-tty-switch-ia64-simserial-to-proc_fops.patch
proc-tty-switch-xtensa-iss-console-to-proc_fops.patch
proc-tty-remove-struct-tty_operations-read_proc.patch
softirq-introduce-statistics-for-softirq.patch
proc-export-statistics-for-softirq-to-proc.patch
proc-export-statistics-for-softirq-to-proc-fix.patch
proc-update-document-for-proc-softirqs-and-proc-stat.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
