[merged] atmel_spi-allow-transfer-when-max_speed_hz-=-0.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     atmel_spi: allow transfer when max_speed_hz = 0
has been removed from the -mm tree.  Its filename was
     atmel_spi-allow-transfer-when-max_speed_hz-=-0.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: atmel_spi: allow transfer when max_speed_hz = 0
From: Stanislaw Gruszka <stf_xl@xxxxx>

For some reason I have to slowdown clock to touchscreen device.

In atmel_spi_setup() there is comment that max_speed_hz == 0 means as slow
as possible and divider is set to maximum value.  But in
atmel_spi_transfer() function is check against not zero max_speed_hz with
EINVAL returned.

Probably driver should setup divider for each transfer based on
transfer->speed_hz value, but I think that would be not necessary overhead
as all used devices have constant clock.

Below patch works fine for me.

Signed-off-by: Stanislaw Gruszka <stf_xl@xxxxx>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@xxxxxxxxx>
Cc: David Brownell <david-b@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/spi/atmel_spi.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff -puN drivers/spi/atmel_spi.c~atmel_spi-allow-transfer-when-max_speed_hz-=-0 drivers/spi/atmel_spi.c
--- a/drivers/spi/atmel_spi.c~atmel_spi-allow-transfer-when-max_speed_hz-=-0
+++ a/drivers/spi/atmel_spi.c
@@ -670,8 +670,7 @@ static int atmel_spi_transfer(struct spi
 	dev_dbg(controller, "new message %p submitted for %s\n",
 			msg, spi->dev.bus_id);
 
-	if (unlikely(list_empty(&msg->transfers)
-			|| !spi->max_speed_hz))
+	if (unlikely(list_empty(&msg->transfers)))
 		return -EINVAL;
 
 	if (as->stopping)
_

Patches currently in -mm which might be from stf_xl@xxxxx are

origin.patch
arm-at91-fix-nr_aic_irqs-undeclared.patch

--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux