The patch titled
fakephp: allocate PCI resources before adding the device
has been added to the -mm tree. Its filename is
fakephp-allocate-pci-resources-before-adding-the-device.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: fakephp: allocate PCI resources before adding the device
From: "Darrick J. Wong" <djwong@xxxxxxxxxx>
For PCI devices, pci_bus_assign_resources() must be called to set up the
pci_device->resource array before pci_bus_add_devices() can be called,
else attempts to load drivers results in BAR collision errors where there
are none. This is not done in fakephp, so devices can be "unplugged" but
scanning the parent bus won't bring the devices back due to resource
unallocation.
Move the pci_bus_add_device-calling logic into pci_rescan_bus and preface
it with a call to pci_bus_assign_resources so that we only have to
(re)allocate resources once per bus where a new device is found.
Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
Cc: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/pci/hotplug/fakephp.c | 42 +++++++++++++++++++-------------
1 file changed, 26 insertions(+), 16 deletions(-)
diff -puN drivers/pci/hotplug/fakephp.c~fakephp-allocate-pci-resources-before-adding-the-device drivers/pci/hotplug/fakephp.c
--- a/drivers/pci/hotplug/fakephp.c~fakephp-allocate-pci-resources-before-adding-the-device
+++ a/drivers/pci/hotplug/fakephp.c
@@ -195,13 +195,13 @@ static void remove_slot_worker(struct wo
* Tries hard not to re-enable already existing devices;
* also handles scanning of subfunctions.
*/
-static void pci_rescan_slot(struct pci_dev *temp)
+static int pci_rescan_slot(struct pci_dev *temp)
{
struct pci_bus *bus = temp->bus;
struct pci_dev *dev;
int func;
- int retval;
u8 hdr_type;
+ int count = 0;
if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) {
temp->hdr_type = hdr_type & 0x7f;
@@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_d
dbg("New device on %s function %x:%x\n",
bus->name, temp->devfn >> 3,
temp->devfn & 7);
- retval = pci_bus_add_device(dev);
- if (retval)
- dev_err(&dev->dev, "error adding "
- "device, continuing.\n");
- else
- add_slot(dev);
+ count++;
}
}
/* multifunction device? */
if (!(hdr_type & 0x80))
- return;
+ return count;
/* continue scanning for other functions */
for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) {
@@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_d
dbg("New device on %s function %x:%x\n",
bus->name, temp->devfn >> 3,
temp->devfn & 7);
- retval = pci_bus_add_device(dev);
- if (retval)
- dev_err(&dev->dev, "error adding "
- "device, continuing.\n");
- else
- add_slot(dev);
+ count++;
}
}
}
}
+
+ return count;
}
@@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct
{
unsigned int devfn;
struct pci_dev *dev;
+ int retval;
+ int found = 0;
dev = alloc_pci_dev();
if (!dev)
return;
@@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct
dev->sysdata = bus->sysdata;
for (devfn = 0; devfn < 0x100; devfn += 8) {
dev->devfn = devfn;
- pci_rescan_slot(dev);
+ found += pci_rescan_slot(dev);
+ }
+
+ if (found) {
+ pci_bus_assign_resources(bus);
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ /* Skip already-added devices */
+ if (dev->is_added)
+ continue;
+ retval = pci_bus_add_device(dev);
+ if (retval)
+ dev_err(&dev->dev,
+ "Error adding device, continuing\n");
+ else
+ add_slot(dev);
+ }
+ pci_bus_add_devices(bus);
}
kfree(dev);
}
_
Patches currently in -mm which might be from djwong@xxxxxxxxxx are
linux-next.patch
fakephp-allocate-pci-resources-before-adding-the-device.patch
create-a-div_round_closest-macro-to-do-division-with-rounding.patch
adt7462-70-73-use-div_round_closest-for-rounded-division.patch
adt7470-fix-pwm-at-a-certain-level-during-temperature-sensor-scan.patch
adt7470-observe-the-number-of-temperature-sensors-to-shorten-update-time.patch
adt7470-make-automatic-fan-control-really-work.patch
ibmpex-add-endian-annotation-to-extract_data-helper.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
